/****************************************************************************** * * Copyright 1999-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ /****************************************************************************** * * This file contains functions for the Bluetooth Security Manager * ******************************************************************************/ #define LOG_TAG "bt_btm_sec" #include #include #include #include #include #include #include "common/metrics.h" #include "common/time_util.h" #include "device/include/controller.h" #include "main/shim/btm_api.h" #include "main/shim/shim.h" #include "osi/include/log.h" #include "osi/include/osi.h" #include "bt_types.h" #include "bt_utils.h" #include "btif_storage.h" #include "btm_int.h" #include "btu.h" #include "hcimsgs.h" #include "l2c_int.h" #include "gatt_int.h" #define BTM_SEC_MAX_COLLISION_DELAY (5000) #ifdef APPL_AUTH_WRITE_EXCEPTION bool(APPL_AUTH_WRITE_EXCEPTION)(const RawAddress& bd_addr); #endif extern void btm_ble_advertiser_notify_terminated_legacy( uint8_t status, uint16_t connection_handle); extern void bta_dm_remove_device(const RawAddress& bd_addr); /******************************************************************************* * L O C A L F U N C T I O N P R O T O T Y P E S * ******************************************************************************/ tBTM_SEC_SERV_REC* btm_sec_find_first_serv(bool is_originator, uint16_t psm); static tBTM_SEC_SERV_REC* btm_sec_find_next_serv(tBTM_SEC_SERV_REC* p_cur); static tBTM_SEC_SERV_REC* btm_sec_find_mx_serv(uint8_t is_originator, uint16_t psm, uint32_t mx_proto_id, uint32_t mx_chan_id); static bool btm_sec_start_get_name(tBTM_SEC_DEV_REC* p_dev_rec); static void btm_sec_start_authentication(tBTM_SEC_DEV_REC* p_dev_rec); static void btm_sec_start_encryption(tBTM_SEC_DEV_REC* p_dev_rec); static void btm_sec_collision_timeout(void* data); static void btm_restore_mode(void); static void btm_sec_pairing_timeout(void* data); static tBTM_STATUS btm_sec_dd_create_conn(tBTM_SEC_DEV_REC* p_dev_rec); static void btm_sec_change_pairing_state(tBTM_PAIRING_STATE new_state); static const char* btm_pair_state_descr(tBTM_PAIRING_STATE state); static void btm_sec_check_pending_reqs(void); static bool btm_sec_queue_mx_request(const RawAddress& bd_addr, uint16_t psm, bool is_orig, uint32_t mx_proto_id, uint32_t mx_chan_id, tBTM_SEC_CALLBACK* p_callback, void* p_ref_data); static void btm_sec_bond_cancel_complete(void); static void btm_send_link_key_notif(tBTM_SEC_DEV_REC* p_dev_rec); static bool btm_sec_check_prefetch_pin(tBTM_SEC_DEV_REC* p_dev_rec); static uint8_t btm_sec_start_authorization(tBTM_SEC_DEV_REC* p_dev_rec); bool btm_sec_are_all_trusted(uint32_t p_mask[]); static tBTM_STATUS btm_sec_send_hci_disconnect(tBTM_SEC_DEV_REC* p_dev_rec, uint8_t reason, uint16_t conn_handle); tBTM_SEC_DEV_REC* btm_sec_find_dev_by_sec_state(uint8_t state); static bool btm_dev_authenticated(tBTM_SEC_DEV_REC* p_dev_rec); static bool btm_dev_encrypted(tBTM_SEC_DEV_REC* p_dev_rec); static bool btm_dev_authorized(tBTM_SEC_DEV_REC* p_dev_rec); static bool btm_serv_trusted(tBTM_SEC_DEV_REC* p_dev_rec, tBTM_SEC_SERV_REC* p_serv_rec); static bool btm_sec_is_serv_level0(uint16_t psm); static uint16_t btm_sec_set_serv_level4_flags(uint16_t cur_security, bool is_originator); static bool btm_sec_queue_encrypt_request(const RawAddress& bd_addr, tBT_TRANSPORT transport, tBTM_SEC_CALLBACK* p_callback, void* p_ref_data, tBTM_BLE_SEC_ACT sec_act); static void btm_sec_check_pending_enc_req(tBTM_SEC_DEV_REC* p_dev_rec, tBT_TRANSPORT transport, uint8_t encr_enable); static bool btm_sec_use_smp_br_chnl(tBTM_SEC_DEV_REC* p_dev_rec); static bool btm_sec_is_master(tBTM_SEC_DEV_REC* p_dev_rec); /* true - authenticated link key is possible */ static const bool btm_sec_io_map[BTM_IO_CAP_MAX][BTM_IO_CAP_MAX] = { /* OUT, IO, IN, NONE */ /* OUT */ {false, false, true, false}, /* IO */ {false, true, true, false}, /* IN */ {true, true, true, false}, /* NONE */ {false, false, false, false}}; /* BTM_IO_CAP_OUT 0 DisplayOnly */ /* BTM_IO_CAP_IO 1 DisplayYesNo */ /* BTM_IO_CAP_IN 2 KeyboardOnly */ /* BTM_IO_CAP_NONE 3 NoInputNoOutput */ /******************************************************************************* * * Function btm_dev_authenticated * * Description check device is authenticated * * Returns bool true or false * ******************************************************************************/ static bool btm_dev_authenticated(tBTM_SEC_DEV_REC* p_dev_rec) { if (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED) { return (true); } return (false); } /******************************************************************************* * * Function btm_dev_encrypted * * Description check device is encrypted * * Returns bool true or false * ******************************************************************************/ static bool btm_dev_encrypted(tBTM_SEC_DEV_REC* p_dev_rec) { if (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED) { return (true); } return (false); } /******************************************************************************* * * Function btm_dev_authorized * * Description check device is authorized * * Returns bool true or false * ******************************************************************************/ static bool btm_dev_authorized(tBTM_SEC_DEV_REC* p_dev_rec) { if (p_dev_rec->sec_flags & BTM_SEC_AUTHORIZED) { return (true); } return (false); } /******************************************************************************* * * Function btm_dev_16_digit_authenticated * * Description check device is authenticated by using 16 digit pin or MITM * * Returns bool true or false * ******************************************************************************/ static bool btm_dev_16_digit_authenticated(tBTM_SEC_DEV_REC* p_dev_rec) { // BTM_SEC_16_DIGIT_PIN_AUTHED is set if MITM or 16 digit pin is used if (p_dev_rec->sec_flags & BTM_SEC_16_DIGIT_PIN_AUTHED) { return (true); } return (false); } /******************************************************************************* * * Function btm_serv_trusted * * Description check service is trusted * * Returns bool true or false * ******************************************************************************/ static bool btm_serv_trusted(tBTM_SEC_DEV_REC* p_dev_rec, tBTM_SEC_SERV_REC* p_serv_rec) { if (BTM_SEC_IS_SERVICE_TRUSTED(p_dev_rec->trusted_mask, p_serv_rec->service_id)) { return (true); } return (false); } /******************************************************************************* * * Function BTM_SecRegister * * Description Application manager calls this function to register for * security services. There can be one and only one * application saving link keys. BTM allows only first * registration. * * Returns true if registered OK, else false * ******************************************************************************/ bool BTM_SecRegister(const tBTM_APPL_INFO* p_cb_info) { if (bluetooth::shim::is_gd_shim_enabled()) { return bluetooth::shim::BTM_SecRegister(p_cb_info); } BTM_TRACE_EVENT("%s application registered", __func__); LOG_INFO("%s p_cb_info->p_le_callback == 0x%p", __func__, p_cb_info->p_le_callback); if (p_cb_info->p_le_callback) { BTM_TRACE_EVENT("%s SMP_Register( btm_proc_smp_cback )", __func__); SMP_Register(btm_proc_smp_cback); Octet16 zero{0}; /* if no IR is loaded, need to regenerate all the keys */ if (btm_cb.devcb.id_keys.ir == zero) { btm_ble_reset_id(); } } else { LOG_WARN("%s p_cb_info->p_le_callback == NULL", __func__); } btm_cb.api = *p_cb_info; LOG_INFO("%s btm_cb.api.p_le_callback = 0x%p ", __func__, btm_cb.api.p_le_callback); BTM_TRACE_EVENT("%s application registered", __func__); return (true); } /******************************************************************************* * * Function BTM_SecAddRmtNameNotifyCallback * * Description Any profile can register to be notified when name of the * remote device is resolved. * * Returns true if registered OK, else false * ******************************************************************************/ bool BTM_SecAddRmtNameNotifyCallback(tBTM_RMT_NAME_CALLBACK* p_callback) { int i; for (i = 0; i < BTM_SEC_MAX_RMT_NAME_CALLBACKS; i++) { if (btm_cb.p_rmt_name_callback[i] == NULL) { btm_cb.p_rmt_name_callback[i] = p_callback; return (true); } } return (false); } /******************************************************************************* * * Function BTM_SecDeleteRmtNameNotifyCallback * * Description Any profile can deregister notification when a new Link Key * is generated per connection. * * Returns true if OK, else false * ******************************************************************************/ bool BTM_SecDeleteRmtNameNotifyCallback(tBTM_RMT_NAME_CALLBACK* p_callback) { int i; for (i = 0; i < BTM_SEC_MAX_RMT_NAME_CALLBACKS; i++) { if (btm_cb.p_rmt_name_callback[i] == p_callback) { btm_cb.p_rmt_name_callback[i] = NULL; return (true); } } return (false); } /******************************************************************************* * * Function BTM_GetSecurityFlags * * Description Get security flags for the device * * Returns bool true or false is device found * ******************************************************************************/ bool BTM_GetSecurityFlags(const RawAddress& bd_addr, uint8_t* p_sec_flags) { tBTM_SEC_DEV_REC* p_dev_rec; p_dev_rec = btm_find_dev(bd_addr); if (p_dev_rec != NULL) { *p_sec_flags = (uint8_t)p_dev_rec->sec_flags; return (true); } BTM_TRACE_ERROR("BTM_GetSecurityFlags false"); return (false); } /******************************************************************************* * * Function BTM_GetSecurityFlagsByTransport * * Description Get security flags for the device on a particular transport * * Returns bool true or false is device found * ******************************************************************************/ bool BTM_GetSecurityFlagsByTransport(const RawAddress& bd_addr, uint8_t* p_sec_flags, tBT_TRANSPORT transport) { tBTM_SEC_DEV_REC* p_dev_rec; p_dev_rec = btm_find_dev(bd_addr); if (p_dev_rec != NULL) { if (transport == BT_TRANSPORT_BR_EDR) *p_sec_flags = (uint8_t)p_dev_rec->sec_flags; else *p_sec_flags = (uint8_t)(p_dev_rec->sec_flags >> 8); return (true); } BTM_TRACE_ERROR("BTM_GetSecurityFlags false"); return (false); } /******************************************************************************* * * Function BTM_SetPinType * * Description Set PIN type for the device. * * Returns void * ******************************************************************************/ void BTM_SetPinType(uint8_t pin_type, PIN_CODE pin_code, uint8_t pin_code_len) { BTM_TRACE_API( "BTM_SetPinType: pin type %d [variable-0, fixed-1], code %s, length %d", pin_type, (char*)pin_code, pin_code_len); /* If device is not up security mode will be set as a part of startup */ if ((btm_cb.cfg.pin_type != pin_type) && controller_get_interface()->get_is_ready()) { btsnd_hcic_write_pin_type(pin_type); } btm_cb.cfg.pin_type = pin_type; btm_cb.cfg.pin_code_len = pin_code_len; memcpy(btm_cb.cfg.pin_code, pin_code, pin_code_len); } /******************************************************************************* * * Function BTM_SetPairableMode * * Description Enable or disable pairing * * Parameters allow_pairing - (true or false) whether or not the device * allows pairing. * connect_only_paired - (true or false) whether or not to * only allow paired devices to connect. * * Returns void * ******************************************************************************/ void BTM_SetPairableMode(bool allow_pairing, bool connect_only_paired) { BTM_TRACE_API( "BTM_SetPairableMode() allow_pairing: %u connect_only_paired: %u", allow_pairing, connect_only_paired); btm_cb.pairing_disabled = !allow_pairing; btm_cb.connect_only_paired = connect_only_paired; } #define BTM_NO_AVAIL_SEC_SERVICES ((uint16_t)0xffff) /******************************************************************************* * * Function BTM_SetSecurityLevel * * Description Register service security level with Security Manager * * Parameters: is_originator - true if originating the connection * p_name - Name of the service relevant only if * authorization will show this name to user. * Ignored if BTM_SEC_SERVICE_NAME_LEN is 0. * service_id - service ID for the service passed to * authorization callback * sec_level - bit mask of the security features * psm - L2CAP PSM * mx_proto_id - protocol ID of multiplexing proto below * mx_chan_id - channel ID of multiplexing proto below * * Returns true if registered OK, else false * ******************************************************************************/ bool BTM_SetSecurityLevel(bool is_originator, const char* p_name, uint8_t service_id, uint16_t sec_level, uint16_t psm, uint32_t mx_proto_id, uint32_t mx_chan_id) { tBTM_SEC_SERV_REC* p_srec; uint16_t index; uint16_t first_unused_record = BTM_NO_AVAIL_SEC_SERVICES; bool record_allocated = false; BTM_TRACE_API("%s : sec: 0x%x", __func__, sec_level); /* See if the record can be reused (same service name, psm, mx_proto_id, service_id, and mx_chan_id), or obtain the next unused record */ p_srec = &btm_cb.sec_serv_rec[0]; for (index = 0; index < BTM_SEC_MAX_SERVICE_RECORDS; index++, p_srec++) { /* Check if there is already a record for this service */ if (p_srec->security_flags & BTM_SEC_IN_USE) { #if BTM_SEC_SERVICE_NAME_LEN > 0 if (p_srec->psm == psm && p_srec->mx_proto_id == mx_proto_id && service_id == p_srec->service_id && p_name && (!strncmp(p_name, (char*)p_srec->orig_service_name, /* strlcpy replaces end char with termination char*/ BTM_SEC_SERVICE_NAME_LEN - 1) || !strncmp(p_name, (char*)p_srec->term_service_name, /* strlcpy replaces end char with termination char*/ BTM_SEC_SERVICE_NAME_LEN - 1))) #else if (p_srec->psm == psm && p_srec->mx_proto_id == mx_proto_id && service_id == p_srec->service_id) #endif { record_allocated = true; break; } } /* Mark the first available service record */ else if (!record_allocated) { memset(p_srec, 0, sizeof(tBTM_SEC_SERV_REC)); record_allocated = true; first_unused_record = index; } } if (!record_allocated) { BTM_TRACE_WARNING("BTM_SEC_REG: Out of Service Records (%d)", BTM_SEC_MAX_SERVICE_RECORDS); return (record_allocated); } /* Process the request if service record is valid */ /* If a duplicate service wasn't found, use the first available */ if (index >= BTM_SEC_MAX_SERVICE_RECORDS) { index = first_unused_record; p_srec = &btm_cb.sec_serv_rec[index]; } p_srec->psm = psm; p_srec->service_id = service_id; p_srec->mx_proto_id = mx_proto_id; if (is_originator) { p_srec->orig_mx_chan_id = mx_chan_id; #if BTM_SEC_SERVICE_NAME_LEN > 0 strlcpy((char*)p_srec->orig_service_name, p_name, BTM_SEC_SERVICE_NAME_LEN + 1); #endif /* clear out the old setting, just in case it exists */ { p_srec->security_flags &= ~( BTM_SEC_OUT_AUTHORIZE | BTM_SEC_OUT_ENCRYPT | BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_MITM | BTM_SEC_FORCE_MASTER | BTM_SEC_ATTEMPT_MASTER | BTM_SEC_FORCE_SLAVE | BTM_SEC_ATTEMPT_SLAVE); } /* Parameter validation. Originator should not set requirements for * incoming connections */ sec_level &= ~(BTM_SEC_IN_AUTHORIZE | BTM_SEC_IN_ENCRYPT | BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_MITM | BTM_SEC_IN_MIN_16_DIGIT_PIN); if (btm_cb.security_mode == BTM_SEC_MODE_SP || btm_cb.security_mode == BTM_SEC_MODE_SP_DEBUG || btm_cb.security_mode == BTM_SEC_MODE_SC) { if (sec_level & BTM_SEC_OUT_AUTHENTICATE) sec_level |= BTM_SEC_OUT_MITM; } /* Make sure the authenticate bit is set, when encrypt bit is set */ if (sec_level & BTM_SEC_OUT_ENCRYPT) sec_level |= BTM_SEC_OUT_AUTHENTICATE; /* outgoing connections usually set the security level right before * the connection is initiated. * set it to be the outgoing service */ btm_cb.p_out_serv = p_srec; } else { p_srec->term_mx_chan_id = mx_chan_id; #if BTM_SEC_SERVICE_NAME_LEN > 0 strlcpy((char*)p_srec->term_service_name, p_name, BTM_SEC_SERVICE_NAME_LEN + 1); #endif /* clear out the old setting, just in case it exists */ { p_srec->security_flags &= ~(BTM_SEC_IN_AUTHORIZE | BTM_SEC_IN_ENCRYPT | BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_MITM | BTM_SEC_FORCE_MASTER | BTM_SEC_ATTEMPT_MASTER | BTM_SEC_FORCE_SLAVE | BTM_SEC_ATTEMPT_SLAVE | BTM_SEC_IN_MIN_16_DIGIT_PIN); } /* Parameter validation. Acceptor should not set requirements for outgoing * connections */ sec_level &= ~(BTM_SEC_OUT_AUTHORIZE | BTM_SEC_OUT_ENCRYPT | BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_MITM); if (btm_cb.security_mode == BTM_SEC_MODE_SP || btm_cb.security_mode == BTM_SEC_MODE_SP_DEBUG || btm_cb.security_mode == BTM_SEC_MODE_SC) { if (sec_level & BTM_SEC_IN_AUTHENTICATE) sec_level |= BTM_SEC_IN_MITM; } /* Make sure the authenticate bit is set, when encrypt bit is set */ if (sec_level & BTM_SEC_IN_ENCRYPT) sec_level |= BTM_SEC_IN_AUTHENTICATE; } p_srec->security_flags |= (uint16_t)(sec_level | BTM_SEC_IN_USE); BTM_TRACE_API( "BTM_SEC_REG[%d]: id %d, is_orig %d, psm 0x%04x, proto_id %d, chan_id %d", index, service_id, is_originator, psm, mx_proto_id, mx_chan_id); #if BTM_SEC_SERVICE_NAME_LEN > 0 BTM_TRACE_API( " : sec: 0x%x, service name [%s] (up to %d chars saved)", p_srec->security_flags, p_name, BTM_SEC_SERVICE_NAME_LEN); #endif return (record_allocated); } /******************************************************************************* * * Function BTM_SecClrService * * Description Removes specified service record(s) from the security * database. All service records with the specified name are * removed. Typically used only by devices with limited RAM so * that it can reuse an old security service record. * * Note: Unpredictable results may occur if a service is * cleared that is still in use by an application/profile. * * Parameters Service ID - Id of the service to remove. '0' removes all * service records (except SDP). * * Returns Number of records that were freed. * ******************************************************************************/ uint8_t BTM_SecClrService(uint8_t service_id) { tBTM_SEC_SERV_REC* p_srec = &btm_cb.sec_serv_rec[0]; uint8_t num_freed = 0; int i; for (i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_srec++) { /* Delete services with specified name (if in use and not SDP) */ if ((p_srec->security_flags & BTM_SEC_IN_USE) && (p_srec->psm != BT_PSM_SDP) && (!service_id || (service_id == p_srec->service_id))) { BTM_TRACE_API("BTM_SEC_CLR[%d]: id %d", i, service_id); p_srec->security_flags = 0; num_freed++; } } return (num_freed); } /******************************************************************************* * * Function btm_sec_clr_service_by_psm * * Description Removes specified service record from the security database. * All service records with the specified psm are removed. * Typically used by L2CAP to free up the service record used * by dynamic PSM clients when the channel is closed. * The given psm must be a virtual psm. * * Parameters Service ID - Id of the service to remove. '0' removes all * service records (except SDP). * * Returns Number of records that were freed. * ******************************************************************************/ uint8_t btm_sec_clr_service_by_psm(uint16_t psm) { tBTM_SEC_SERV_REC* p_srec = &btm_cb.sec_serv_rec[0]; uint8_t num_freed = 0; int i; for (i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_srec++) { /* Delete services with specified name (if in use and not SDP) */ if ((p_srec->security_flags & BTM_SEC_IN_USE) && (p_srec->psm == psm)) { BTM_TRACE_API("BTM_SEC_CLR[%d]: id %d ", i, p_srec->service_id); p_srec->security_flags = 0; num_freed++; } } BTM_TRACE_API("btm_sec_clr_service_by_psm psm:0x%x num_freed:%d", psm, num_freed); return (num_freed); } /******************************************************************************* * * Function btm_sec_clr_temp_auth_service * * Description Removes specified device record's temporary authorization * flag from the security database. * * Parameters Device address to be cleared * * Returns void. * ******************************************************************************/ void btm_sec_clr_temp_auth_service(const RawAddress& bda) { tBTM_SEC_DEV_REC* p_dev_rec; p_dev_rec = btm_find_dev(bda); if (p_dev_rec == NULL) { BTM_TRACE_WARNING("btm_sec_clr_temp_auth_service() - no dev CB"); return; } /* Reset the temporary authorized flag so that next time (untrusted) service * is accessed autorization will take place */ if (p_dev_rec->last_author_service_id != BTM_SEC_NO_LAST_SERVICE_ID && p_dev_rec->p_cur_service) { VLOG(1) << __func__ << " clearing device: " << bda; p_dev_rec->last_author_service_id = BTM_SEC_NO_LAST_SERVICE_ID; } } /******************************************************************************* * * Function BTM_PINCodeReply * * Description This function is called after Security Manager submitted * PIN code request to the UI. * * Parameters: bd_addr - Address of the device for which PIN was * requested * res - result of the operation BTM_SUCCESS * if success * pin_len - length in bytes of the PIN Code * p_pin - pointer to array with the PIN Code * trusted_mask - bitwise OR of trusted services * (array of uint32_t) * ******************************************************************************/ void BTM_PINCodeReply(const RawAddress& bd_addr, uint8_t res, uint8_t pin_len, uint8_t* p_pin, uint32_t trusted_mask[]) { tBTM_SEC_DEV_REC* p_dev_rec; BTM_TRACE_API( "BTM_PINCodeReply(): PairState: %s PairFlags: 0x%02x PinLen:%d " "Result:%d", btm_pair_state_descr(btm_cb.pairing_state), btm_cb.pairing_flags, pin_len, res); /* If timeout already expired or has been canceled, ignore the reply */ if (btm_cb.pairing_state != BTM_PAIR_STATE_WAIT_LOCAL_PIN) { BTM_TRACE_WARNING("BTM_PINCodeReply() - Wrong State: %d", btm_cb.pairing_state); return; } if (bd_addr != btm_cb.pairing_bda) { BTM_TRACE_ERROR("BTM_PINCodeReply() - Wrong BD Addr"); return; } p_dev_rec = btm_find_dev(bd_addr); if (p_dev_rec == NULL) { BTM_TRACE_ERROR("BTM_PINCodeReply() - no dev CB"); return; } if ((pin_len > PIN_CODE_LEN) || (pin_len == 0) || (p_pin == NULL)) res = BTM_ILLEGAL_VALUE; if (res != BTM_SUCCESS) { /* if peer started dd OR we started dd and pre-fetch pin was not used send * negative reply */ if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_PEER_STARTED_DD) || ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) && (btm_cb.pairing_flags & BTM_PAIR_FLAGS_DISC_WHEN_DONE))) { /* use BTM_PAIR_STATE_WAIT_AUTH_COMPLETE to report authentication failed * event */ btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_AUTH_COMPLETE); btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY; btsnd_hcic_pin_code_neg_reply(bd_addr); } else { p_dev_rec->security_required = BTM_SEC_NONE; btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); } return; } if (trusted_mask) BTM_SEC_COPY_TRUSTED_DEVICE(trusted_mask, p_dev_rec->trusted_mask); p_dev_rec->sec_flags |= BTM_SEC_LINK_KEY_AUTHED; p_dev_rec->pin_code_length = pin_len; if (pin_len >= 16) { p_dev_rec->sec_flags |= BTM_SEC_16_DIGIT_PIN_AUTHED; } if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) && (p_dev_rec->hci_handle == BTM_SEC_INVALID_HANDLE) && (!btm_cb.security_mode_changed)) { /* This is start of the dedicated bonding if local device is 2.0 */ btm_cb.pin_code_len = pin_len; memcpy(btm_cb.pin_code, p_pin, pin_len); btm_cb.security_mode_changed = true; #ifdef APPL_AUTH_WRITE_EXCEPTION if (!(APPL_AUTH_WRITE_EXCEPTION)(p_dev_rec->bd_addr)) #endif btsnd_hcic_write_auth_enable(true); btm_cb.acl_disc_reason = 0xff; /* if we rejected incoming connection request, we have to wait * HCI_Connection_Complete event */ /* before originating */ if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_REJECTED_CONNECT) { BTM_TRACE_WARNING( "BTM_PINCodeReply(): waiting HCI_Connection_Complete after rejected " "incoming connection"); /* we change state little bit early so btm_sec_connected() will originate * connection */ /* when existing ACL link is down completely */ btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_PIN_REQ); } /* if we already accepted incoming connection from pairing device */ else if (p_dev_rec->sm4 & BTM_SM4_CONN_PEND) { BTM_TRACE_WARNING( "BTM_PINCodeReply(): link is connecting so wait pin code request " "from peer"); btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_PIN_REQ); } else if (btm_sec_dd_create_conn(p_dev_rec) != BTM_CMD_STARTED) { btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); p_dev_rec->sec_flags &= ~BTM_SEC_LINK_KEY_AUTHED; if (btm_cb.api.p_auth_complete_callback) (*btm_cb.api.p_auth_complete_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, HCI_ERR_AUTH_FAILURE); } return; } btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_AUTH_COMPLETE); btm_cb.acl_disc_reason = HCI_SUCCESS; btsnd_hcic_pin_code_req_reply(bd_addr, pin_len, p_pin); } /******************************************************************************* * * Function btm_sec_bond_by_transport * * Description this is the bond function that will start either SSP or SMP. * * Parameters: bd_addr - Address of the device to bond * pin_len - length in bytes of the PIN Code * p_pin - pointer to array with the PIN Code * trusted_mask - bitwise OR of trusted services * (array of uint32_t) * * Note: After 2.1 parameters are not used and preserved here not to change API ******************************************************************************/ tBTM_STATUS btm_sec_bond_by_transport(const RawAddress& bd_addr, tBT_TRANSPORT transport, uint8_t pin_len, uint8_t* p_pin, uint32_t trusted_mask[]) { tBTM_SEC_DEV_REC* p_dev_rec; tBTM_STATUS status; uint8_t* p_features; uint8_t ii; tACL_CONN* p = btm_bda_to_acl(bd_addr, transport); VLOG(1) << __func__ << " BDA: " << bd_addr; BTM_TRACE_DEBUG("%s: Transport used %d, bd_addr=%s", __func__, transport, bd_addr.ToString().c_str()); /* Other security process is in progress */ if (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) { BTM_TRACE_ERROR("BTM_SecBond: already busy in state: %s", btm_pair_state_descr(btm_cb.pairing_state)); return (BTM_WRONG_MODE); } p_dev_rec = btm_find_or_alloc_dev(bd_addr); if (p_dev_rec == NULL) { return (BTM_NO_RESOURCES); } if (!controller_get_interface()->get_is_ready()) { BTM_TRACE_ERROR("%s controller module is not ready", __func__); return (BTM_NO_RESOURCES); } BTM_TRACE_DEBUG("before update sec_flags=0x%x", p_dev_rec->sec_flags); /* Finished if connection is active and already paired */ if (((p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE) && transport == BT_TRANSPORT_BR_EDR && (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED)) || ((p_dev_rec->ble_hci_handle != BTM_SEC_INVALID_HANDLE) && transport == BT_TRANSPORT_LE && (p_dev_rec->sec_flags & BTM_SEC_LE_AUTHENTICATED))) { BTM_TRACE_WARNING("BTM_SecBond -> Already Paired"); return (BTM_SUCCESS); } /* Tell controller to get rid of the link key if it has one stored */ if ((BTM_DeleteStoredLinkKey(&bd_addr, NULL)) != BTM_SUCCESS) return (BTM_NO_RESOURCES); /* Save the PIN code if we got a valid one */ if (p_pin && (pin_len <= PIN_CODE_LEN) && (pin_len != 0)) { btm_cb.pin_code_len = pin_len; p_dev_rec->pin_code_length = pin_len; memcpy(btm_cb.pin_code, p_pin, PIN_CODE_LEN); } btm_cb.pairing_bda = bd_addr; btm_cb.pairing_flags = BTM_PAIR_FLAGS_WE_STARTED_DD; p_dev_rec->security_required = BTM_SEC_OUT_AUTHENTICATE; p_dev_rec->is_originator = true; if (trusted_mask) BTM_SEC_COPY_TRUSTED_DEVICE(trusted_mask, p_dev_rec->trusted_mask); if (transport == BT_TRANSPORT_LE) { btm_ble_init_pseudo_addr(p_dev_rec, bd_addr); p_dev_rec->sec_flags &= ~BTM_SEC_LE_MASK; if (SMP_Pair(bd_addr) == SMP_STARTED) { btm_cb.pairing_flags |= BTM_PAIR_FLAGS_LE_ACTIVE; p_dev_rec->sec_state = BTM_SEC_STATE_AUTHENTICATING; btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_AUTH_COMPLETE); return BTM_CMD_STARTED; } btm_cb.pairing_flags = 0; return (BTM_NO_RESOURCES); } p_dev_rec->sec_flags &= ~(BTM_SEC_LINK_KEY_KNOWN | BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED | BTM_SEC_ROLE_SWITCHED | BTM_SEC_LINK_KEY_AUTHED); BTM_TRACE_DEBUG("after update sec_flags=0x%x", p_dev_rec->sec_flags); if (!controller_get_interface()->supports_simple_pairing()) { /* The special case when we authenticate keyboard. Set pin type to fixed */ /* It would be probably better to do it from the application, but it is */ /* complicated */ if (((p_dev_rec->dev_class[1] & BTM_COD_MAJOR_CLASS_MASK) == BTM_COD_MAJOR_PERIPHERAL) && (p_dev_rec->dev_class[2] & BTM_COD_MINOR_KEYBOARD) && (btm_cb.cfg.pin_type != HCI_PIN_TYPE_FIXED)) { btm_cb.pin_type_changed = true; btsnd_hcic_write_pin_type(HCI_PIN_TYPE_FIXED); } } for (ii = 0; ii <= HCI_EXT_FEATURES_PAGE_MAX; ii++) { p_features = p_dev_rec->feature_pages[ii]; BTM_TRACE_EVENT(" remote_features page[%1d] = %02x-%02x-%02x-%02x", ii, p_features[0], p_features[1], p_features[2], p_features[3]); BTM_TRACE_EVENT(" %02x-%02x-%02x-%02x", p_features[4], p_features[5], p_features[6], p_features[7]); } BTM_TRACE_EVENT("BTM_SecBond: Remote sm4: 0x%x HCI Handle: 0x%04x", p_dev_rec->sm4, p_dev_rec->hci_handle); #if (BTM_SEC_FORCE_RNR_FOR_DBOND == TRUE) p_dev_rec->sec_flags &= ~BTM_SEC_NAME_KNOWN; #endif /* If connection already exists... */ if (p && p->hci_handle != BTM_SEC_INVALID_HANDLE) { btm_sec_start_authentication(p_dev_rec); btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_PIN_REQ); /* Mark lcb as bonding */ l2cu_update_lcb_4_bonding(bd_addr, true); return (BTM_CMD_STARTED); } BTM_TRACE_DEBUG("sec mode: %d sm4:x%x", btm_cb.security_mode, p_dev_rec->sm4); if (!controller_get_interface()->supports_simple_pairing() || (p_dev_rec->sm4 == BTM_SM4_KNOWN)) { if (btm_sec_check_prefetch_pin(p_dev_rec)) return (BTM_CMD_STARTED); } if ((btm_cb.security_mode == BTM_SEC_MODE_SP || btm_cb.security_mode == BTM_SEC_MODE_SP_DEBUG || btm_cb.security_mode == BTM_SEC_MODE_SC) && BTM_SEC_IS_SM4_UNKNOWN(p_dev_rec->sm4)) { /* local is 2.1 and peer is unknown */ if ((p_dev_rec->sm4 & BTM_SM4_CONN_PEND) == 0) { /* we are not accepting connection request from peer * -> RNR (to learn if peer is 2.1) * RNR when no ACL causes HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT */ btm_sec_change_pairing_state(BTM_PAIR_STATE_GET_REM_NAME); status = BTM_ReadRemoteDeviceName(bd_addr, NULL, BT_TRANSPORT_BR_EDR); } else { /* We are accepting connection request from peer */ btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_PIN_REQ); status = BTM_CMD_STARTED; } BTM_TRACE_DEBUG("State:%s sm4: 0x%x sec_state:%d", btm_pair_state_descr(btm_cb.pairing_state), p_dev_rec->sm4, p_dev_rec->sec_state); } else { /* both local and peer are 2.1 */ status = btm_sec_dd_create_conn(p_dev_rec); } if (status != BTM_CMD_STARTED) { BTM_TRACE_ERROR( "%s BTM_ReadRemoteDeviceName or btm_sec_dd_create_conn error: 0x%x", __func__, (int)status); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); } return status; } /******************************************************************************* * * Function BTM_SecBond * * Description This function is called to perform bonding with peer device. * If the connection is already up, but not secure, pairing * is attempted. If already paired BTM_SUCCESS is returned. * * Parameters: bd_addr - Address of the device to bond * transport - doing SSP over BR/EDR or SMP over LE * pin_len - length in bytes of the PIN Code * p_pin - pointer to array with the PIN Code * trusted_mask - bitwise OR of trusted services * (array of uint32_t) * * Note: After 2.1 parameters are not used and preserved here not to change API ******************************************************************************/ tBTM_STATUS BTM_SecBond(const RawAddress& bd_addr, tBLE_ADDR_TYPE addr_type, tBT_TRANSPORT transport, int device_type, uint8_t pin_len, uint8_t* p_pin, uint32_t trusted_mask[]) { if (bluetooth::shim::is_gd_shim_enabled()) { return bluetooth::shim::BTM_SecBond(bd_addr, addr_type, transport, device_type); } if (transport == BT_TRANSPORT_INVALID) transport = BTM_UseLeLink(bd_addr) ? BT_TRANSPORT_LE : BT_TRANSPORT_BR_EDR; tBT_DEVICE_TYPE dev_type; BTM_ReadDevInfo(bd_addr, &dev_type, &addr_type); /* LE device, do SMP pairing */ if ((transport == BT_TRANSPORT_LE && (dev_type & BT_DEVICE_TYPE_BLE) == 0) || (transport == BT_TRANSPORT_BR_EDR && (dev_type & BT_DEVICE_TYPE_BREDR) == 0)) { return BTM_ILLEGAL_ACTION; } return btm_sec_bond_by_transport(bd_addr, transport, pin_len, p_pin, trusted_mask); } /******************************************************************************* * * Function BTM_SecBondCancel * * Description This function is called to cancel ongoing bonding process * with peer device. * * Parameters: bd_addr - Address of the peer device * transport - false for BR/EDR link; true for LE link * ******************************************************************************/ tBTM_STATUS BTM_SecBondCancel(const RawAddress& bd_addr) { if (bluetooth::shim::is_gd_shim_enabled()) { return bluetooth::shim::BTM_SecBondCancel(bd_addr); } tBTM_SEC_DEV_REC* p_dev_rec; BTM_TRACE_API("BTM_SecBondCancel() State: %s flags:0x%x", btm_pair_state_descr(btm_cb.pairing_state), btm_cb.pairing_flags); p_dev_rec = btm_find_dev(bd_addr); if (!p_dev_rec || btm_cb.pairing_bda != bd_addr) { return BTM_UNKNOWN_ADDR; } if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_LE_ACTIVE) { if (p_dev_rec->sec_state == BTM_SEC_STATE_AUTHENTICATING) { BTM_TRACE_DEBUG("Cancel LE pairing"); if (SMP_PairCancel(bd_addr)) { return BTM_CMD_STARTED; } } return BTM_WRONG_MODE; } BTM_TRACE_DEBUG("hci_handle:0x%x sec_state:%d", p_dev_rec->hci_handle, p_dev_rec->sec_state); if (BTM_PAIR_STATE_WAIT_LOCAL_PIN == btm_cb.pairing_state && BTM_PAIR_FLAGS_WE_STARTED_DD & btm_cb.pairing_flags) { /* pre-fetching pin for dedicated bonding */ btm_sec_bond_cancel_complete(); return BTM_SUCCESS; } /* If this BDA is in a bonding procedure */ if ((btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) && (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)) { /* If the HCI link is up */ if (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE) { /* If some other thread disconnecting, we do not send second command */ if ((p_dev_rec->sec_state == BTM_SEC_STATE_DISCONNECTING) || (p_dev_rec->sec_state == BTM_SEC_STATE_DISCONNECTING_BOTH)) return (BTM_CMD_STARTED); /* If the HCI link was set up by Bonding process */ if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_DISC_WHEN_DONE) return btm_sec_send_hci_disconnect(p_dev_rec, HCI_ERR_PEER_USER, p_dev_rec->hci_handle); else l2cu_update_lcb_4_bonding(bd_addr, false); return BTM_NOT_AUTHORIZED; } else /*HCI link is not up */ { /* If the HCI link creation was started by Bonding process */ if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_DISC_WHEN_DONE) { btsnd_hcic_create_conn_cancel(bd_addr); return BTM_CMD_STARTED; } if (btm_cb.pairing_state == BTM_PAIR_STATE_GET_REM_NAME) { BTM_CancelRemoteDeviceName(); btm_cb.pairing_flags |= BTM_PAIR_FLAGS_WE_CANCEL_DD; return BTM_CMD_STARTED; } return BTM_NOT_AUTHORIZED; } } return BTM_WRONG_MODE; } /******************************************************************************* * * Function BTM_SecGetDeviceLinkKeyType * * Description This function is called to obtain link key type for the * device. * it returns BTM_SUCCESS if link key is available, or * BTM_UNKNOWN_ADDR if Security Manager does not know about * the device or device record does not contain link key info * * Returns BTM_LKEY_TYPE_IGNORE if link key is unknown, link type * otherwise. * ******************************************************************************/ tBTM_LINK_KEY_TYPE BTM_SecGetDeviceLinkKeyType(const RawAddress& bd_addr) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev(bd_addr); if ((p_dev_rec != NULL) && (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN)) { return p_dev_rec->link_key_type; } return BTM_LKEY_TYPE_IGNORE; } /******************************************************************************* * * Function BTM_SetEncryption * * Description This function is called to ensure that connection is * encrypted. Should be called only on an open connection. * Typically only needed for connections that first want to * bring up unencrypted links, then later encrypt them. * * Parameters: bd_addr - Address of the peer device * transport - Link transport * p_callback - Pointer to callback function called if * this function returns PENDING after required * procedures are completed. Can be set to * NULL if status is not desired. * p_ref_data - pointer to any data the caller wishes to * receive in the callback function upon * completion. can be set to NULL if not used. * sec_act - LE security action, unused for BR/EDR * * Returns BTM_SUCCESS - already encrypted * BTM_PENDING - command will be returned in the callback * BTM_WRONG_MODE- connection not up. * BTM_BUSY - security procedures are currently active * BTM_MODE_UNSUPPORTED - if security manager not linked in. * ******************************************************************************/ tBTM_STATUS BTM_SetEncryption(const RawAddress& bd_addr, tBT_TRANSPORT transport, tBTM_SEC_CBACK* p_callback, void* p_ref_data, tBTM_BLE_SEC_ACT sec_act) { if (bluetooth::shim::is_gd_shim_enabled()) { return bluetooth::shim::BTM_SetEncryption(bd_addr, transport, p_callback, p_ref_data, sec_act); } tBTM_STATUS rc = 0; tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev(bd_addr); if (!p_dev_rec || (transport == BT_TRANSPORT_BR_EDR && p_dev_rec->hci_handle == BTM_SEC_INVALID_HANDLE) || (transport == BT_TRANSPORT_LE && p_dev_rec->ble_hci_handle == BTM_SEC_INVALID_HANDLE)) { /* Connection should be up and runnning */ BTM_TRACE_WARNING("Security Manager: BTM_SetEncryption not connected"); if (p_callback) (*p_callback)(&bd_addr, transport, p_ref_data, BTM_WRONG_MODE); return (BTM_WRONG_MODE); } if (transport == BT_TRANSPORT_BR_EDR && (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED)) { BTM_TRACE_EVENT("Security Manager: BTM_SetEncryption already encrypted"); if (*p_callback) (*p_callback)(&bd_addr, transport, p_ref_data, BTM_SUCCESS); return (BTM_SUCCESS); } /* enqueue security request if security is active */ if (p_dev_rec->p_callback || (p_dev_rec->sec_state != BTM_SEC_STATE_IDLE)) { BTM_TRACE_WARNING( "Security Manager: BTM_SetEncryption busy, enqueue request"); if (btm_sec_queue_encrypt_request(bd_addr, transport, p_callback, p_ref_data, sec_act)) { return BTM_CMD_STARTED; } else { if (p_callback) (*p_callback)(&bd_addr, transport, p_ref_data, BTM_NO_RESOURCES); return BTM_NO_RESOURCES; } } p_dev_rec->p_callback = p_callback; p_dev_rec->p_ref_data = p_ref_data; p_dev_rec->security_required |= (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT); p_dev_rec->is_originator = false; BTM_TRACE_API( "Security Manager: BTM_SetEncryption Handle:%d State:%d Flags:0x%x " "Required:0x%x, p_dev_rec=%p, p_callback=%p", p_dev_rec->hci_handle, p_dev_rec->sec_state, p_dev_rec->sec_flags, p_dev_rec->security_required, p_dev_rec, p_callback); if (transport == BT_TRANSPORT_LE) { tACL_CONN* p = btm_bda_to_acl(bd_addr, transport); if (p) { rc = btm_ble_set_encryption(bd_addr, sec_act, p->link_role); } else { rc = BTM_WRONG_MODE; BTM_TRACE_WARNING("%s: cannot call btm_ble_set_encryption, p is NULL", __func__); } } else { rc = btm_sec_execute_procedure(p_dev_rec); } if (rc != BTM_CMD_STARTED && rc != BTM_BUSY) { if (p_callback) { BTM_TRACE_DEBUG( "%s: clearing p_callback=%p, p_dev_rec=%p, transport=%d, " "bd_addr=%s", __func__, p_callback, p_dev_rec, transport, bd_addr.ToString().c_str()); p_dev_rec->p_callback = NULL; (*p_callback)(&bd_addr, transport, p_dev_rec->p_ref_data, rc); } } return (rc); } /******************************************************************************* * disconnect the ACL link, if it's not done yet. ******************************************************************************/ static tBTM_STATUS btm_sec_send_hci_disconnect(tBTM_SEC_DEV_REC* p_dev_rec, uint8_t reason, uint16_t conn_handle) { uint8_t old_state = p_dev_rec->sec_state; tBTM_STATUS status = BTM_CMD_STARTED; BTM_TRACE_EVENT("btm_sec_send_hci_disconnect: handle:0x%x, reason=0x%x", conn_handle, reason); /* send HCI_Disconnect on a transport only once */ switch (old_state) { case BTM_SEC_STATE_DISCONNECTING: if (conn_handle == p_dev_rec->hci_handle) return status; p_dev_rec->sec_state = BTM_SEC_STATE_DISCONNECTING_BOTH; break; case BTM_SEC_STATE_DISCONNECTING_BLE: if (conn_handle == p_dev_rec->ble_hci_handle) return status; p_dev_rec->sec_state = BTM_SEC_STATE_DISCONNECTING_BOTH; break; case BTM_SEC_STATE_DISCONNECTING_BOTH: return status; default: p_dev_rec->sec_state = (conn_handle == p_dev_rec->hci_handle) ? BTM_SEC_STATE_DISCONNECTING : BTM_SEC_STATE_DISCONNECTING_BLE; break; } /* If a role switch is in progress, delay the HCI Disconnect to avoid * controller problem */ if (p_dev_rec->rs_disc_pending == BTM_SEC_RS_PENDING && p_dev_rec->hci_handle == conn_handle) { BTM_TRACE_DEBUG( "RS in progress - Set DISC Pending flag in btm_sec_send_hci_disconnect " "to delay disconnect"); p_dev_rec->rs_disc_pending = BTM_SEC_DISC_PENDING; status = BTM_SUCCESS; } /* Tear down the HCI link */ else { btsnd_hcic_disconnect(conn_handle, reason); } return status; } /******************************************************************************* * * Function BTM_ConfirmReqReply * * Description This function is called to confirm the numeric value for * Simple Pairing in response to BTM_SP_CFM_REQ_EVT * * Parameters: res - result of the operation BTM_SUCCESS if * success * bd_addr - Address of the peer device * ******************************************************************************/ void BTM_ConfirmReqReply(tBTM_STATUS res, const RawAddress& bd_addr) { ASSERT_LOG(!bluetooth::shim::is_gd_shim_enabled(), "Unreachable code path"); tBTM_SEC_DEV_REC* p_dev_rec; BTM_TRACE_EVENT("BTM_ConfirmReqReply() State: %s Res: %u", btm_pair_state_descr(btm_cb.pairing_state), res); /* If timeout already expired or has been canceled, ignore the reply */ if ((btm_cb.pairing_state != BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM) || (btm_cb.pairing_bda != bd_addr)) return; btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_AUTH_COMPLETE); if ((res == BTM_SUCCESS) || (res == BTM_SUCCESS_NO_SECURITY)) { btm_cb.acl_disc_reason = HCI_SUCCESS; if (res == BTM_SUCCESS) { p_dev_rec = btm_find_dev(bd_addr); if (p_dev_rec != NULL) { p_dev_rec->sec_flags |= BTM_SEC_LINK_KEY_AUTHED; p_dev_rec->sec_flags |= BTM_SEC_16_DIGIT_PIN_AUTHED; } } btsnd_hcic_user_conf_reply(bd_addr, true); } else { /* Report authentication failed event from state * BTM_PAIR_STATE_WAIT_AUTH_COMPLETE */ btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY; btsnd_hcic_user_conf_reply(bd_addr, false); } } /******************************************************************************* * * Function BTM_PasskeyReqReply * * Description This function is called to provide the passkey for * Simple Pairing in response to BTM_SP_KEY_REQ_EVT * * Parameters: res - result of the operation BTM_SUCCESS if success * bd_addr - Address of the peer device * passkey - numeric value in the range of * BTM_MIN_PASSKEY_VAL(0) - * BTM_MAX_PASSKEY_VAL(999999(0xF423F)). * ******************************************************************************/ void BTM_PasskeyReqReply(tBTM_STATUS res, const RawAddress& bd_addr, uint32_t passkey) { ASSERT_LOG(!bluetooth::shim::is_gd_shim_enabled(), "Unreachable code path"); BTM_TRACE_API("BTM_PasskeyReqReply: State: %s res:%d", btm_pair_state_descr(btm_cb.pairing_state), res); if ((btm_cb.pairing_state == BTM_PAIR_STATE_IDLE) || (btm_cb.pairing_bda != bd_addr)) { return; } /* If timeout already expired or has been canceled, ignore the reply */ if ((btm_cb.pairing_state == BTM_PAIR_STATE_WAIT_AUTH_COMPLETE) && (res != BTM_SUCCESS)) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev(bd_addr); if (p_dev_rec != NULL) { btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY; if (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE) btm_sec_send_hci_disconnect(p_dev_rec, HCI_ERR_AUTH_FAILURE, p_dev_rec->hci_handle); else BTM_SecBondCancel(bd_addr); p_dev_rec->sec_flags &= ~(BTM_SEC_LINK_KEY_AUTHED | BTM_SEC_LINK_KEY_KNOWN); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); return; } } else if (btm_cb.pairing_state != BTM_PAIR_STATE_KEY_ENTRY) return; if (passkey > BTM_MAX_PASSKEY_VAL) res = BTM_ILLEGAL_VALUE; btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_AUTH_COMPLETE); if (res != BTM_SUCCESS) { /* use BTM_PAIR_STATE_WAIT_AUTH_COMPLETE to report authentication failed * event */ btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY; btsnd_hcic_user_passkey_neg_reply(bd_addr); } else { btm_cb.acl_disc_reason = HCI_SUCCESS; btsnd_hcic_user_passkey_reply(bd_addr, passkey); } } /******************************************************************************* * * Function BTM_IoCapRsp * * Description This function is called in response to BTM_SP_IO_REQ_EVT * When the event data io_req.oob_data is set to * BTM_OOB_UNKNOWN by the tBTM_SP_CALLBACK implementation, * this function is called to provide the actual response * * Parameters: bd_addr - Address of the peer device * io_cap - The IO capability of local device. * oob - BTM_OOB_NONE or BTM_OOB_PRESENT. * auth_req- MITM protection required or not. * ******************************************************************************/ void BTM_IoCapRsp(const RawAddress& bd_addr, tBTM_IO_CAP io_cap, tBTM_OOB_DATA oob, tBTM_AUTH_REQ auth_req) { BTM_TRACE_EVENT("BTM_IoCapRsp: state: %s oob: %d io_cap: %d", btm_pair_state_descr(btm_cb.pairing_state), oob, io_cap); if ((btm_cb.pairing_state != BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS) || (btm_cb.pairing_bda != bd_addr)) return; if (oob < BTM_OOB_UNKNOWN && io_cap < BTM_IO_CAP_MAX) { btm_cb.devcb.loc_auth_req = auth_req; btm_cb.devcb.loc_io_caps = io_cap; if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) auth_req = (BTM_AUTH_DD_BOND | (auth_req & BTM_AUTH_YN_BIT)); btsnd_hcic_io_cap_req_reply(bd_addr, io_cap, oob, auth_req); } } /******************************************************************************* * * Function BTM_ReadLocalOobData * * Description This function is called to read the local OOB data from * LM * ******************************************************************************/ void BTM_ReadLocalOobData(void) { btsnd_hcic_read_local_oob_data(); } /******************************************************************************* * * Function BTM_RemoteOobDataReply * * Description This function is called to provide the remote OOB data for * Simple Pairing in response to BTM_SP_RMT_OOB_EVT * * Parameters: bd_addr - Address of the peer device * c - simple pairing Hash C. * r - simple pairing Randomizer C. * ******************************************************************************/ void BTM_RemoteOobDataReply(tBTM_STATUS res, const RawAddress& bd_addr, const Octet16& c, const Octet16& r) { BTM_TRACE_EVENT("%s() - State: %s res: %d", __func__, btm_pair_state_descr(btm_cb.pairing_state), res); /* If timeout already expired or has been canceled, ignore the reply */ if (btm_cb.pairing_state != BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP) return; btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_AUTH_COMPLETE); if (res != BTM_SUCCESS) { /* use BTM_PAIR_STATE_WAIT_AUTH_COMPLETE to report authentication failed * event */ btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY; btsnd_hcic_rem_oob_neg_reply(bd_addr); } else { btm_cb.acl_disc_reason = HCI_SUCCESS; btsnd_hcic_rem_oob_reply(bd_addr, c, r); } } /******************************************************************************* * * Function BTM_BothEndsSupportSecureConnections * * Description This function is called to check if both the local device * and the peer device specified by bd_addr support BR/EDR * Secure Connections. * * Parameters: bd_addr - address of the peer * * Returns true if BR/EDR Secure Connections are supported by both * local and the remote device, else false. * ******************************************************************************/ bool BTM_BothEndsSupportSecureConnections(const RawAddress& bd_addr) { return ((controller_get_interface()->supports_secure_connections()) && (BTM_PeerSupportsSecureConnections(bd_addr))); } /******************************************************************************* * * Function BTM_PeerSupportsSecureConnections * * Description This function is called to check if the peer supports * BR/EDR Secure Connections. * * Parameters: bd_addr - address of the peer * * Returns true if BR/EDR Secure Connections are supported by the peer, * else false. * ******************************************************************************/ bool BTM_PeerSupportsSecureConnections(const RawAddress& bd_addr) { tBTM_SEC_DEV_REC* p_dev_rec; p_dev_rec = btm_find_dev(bd_addr); if (p_dev_rec == NULL) { LOG(WARNING) << __func__ << ": unknown BDA: " << bd_addr; return false; } return (p_dev_rec->remote_supports_secure_connections); } /******************************************************************************* * * Function BTM_SetOutService * * Description This function is called to set the service for * outgoing connections. * * If the profile/application calls BTM_SetSecurityLevel * before initiating a connection, this function does not * need to be called. * * Returns void * ******************************************************************************/ void BTM_SetOutService(const RawAddress& bd_addr, uint8_t service_id, uint32_t mx_chan_id) { tBTM_SEC_DEV_REC* p_dev_rec; tBTM_SEC_SERV_REC* p_serv_rec = &btm_cb.sec_serv_rec[0]; btm_cb.p_out_serv = p_serv_rec; p_dev_rec = btm_find_dev(bd_addr); for (int i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_serv_rec++) { if ((p_serv_rec->security_flags & BTM_SEC_IN_USE) && (p_serv_rec->service_id == service_id) && (p_serv_rec->orig_mx_chan_id == mx_chan_id)) { BTM_TRACE_API( "BTM_SetOutService p_out_serv id %d, psm 0x%04x, proto_id %d, " "chan_id %d", p_serv_rec->service_id, p_serv_rec->psm, p_serv_rec->mx_proto_id, p_serv_rec->orig_mx_chan_id); btm_cb.p_out_serv = p_serv_rec; if (p_dev_rec) p_dev_rec->p_cur_service = p_serv_rec; break; } } } /************************************************************************ * I N T E R N A L F U N C T I O N S ************************************************************************/ /******************************************************************************* * * Function btm_sec_is_upgrade_possible * * Description This function returns true if the existing link key * can be upgraded or if the link key does not exist. * * Returns bool * ******************************************************************************/ static bool btm_sec_is_upgrade_possible(tBTM_SEC_DEV_REC* p_dev_rec, bool is_originator) { uint16_t mtm_check = is_originator ? BTM_SEC_OUT_MITM : BTM_SEC_IN_MITM; bool is_possible = true; if (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN) { is_possible = false; if (p_dev_rec->p_cur_service) { BTM_TRACE_DEBUG( "%s() id: %d, link_key_typet: %d, rmt_io_caps: %d, chk flags: 0x%x, " "flags: 0x%x", __func__, p_dev_rec->p_cur_service->service_id, p_dev_rec->link_key_type, p_dev_rec->rmt_io_caps, mtm_check, p_dev_rec->p_cur_service->security_flags); } else { BTM_TRACE_DEBUG( "%s() link_key_typet: %d, rmt_io_caps: %d, chk flags: 0x%x", __func__, p_dev_rec->link_key_type, p_dev_rec->rmt_io_caps, mtm_check); } /* Already have a link key to the connected peer. Is the link key secure *enough? ** Is a link key upgrade even possible? */ if ((p_dev_rec->security_required & mtm_check) /* needs MITM */ && ((p_dev_rec->link_key_type == BTM_LKEY_TYPE_UNAUTH_COMB) || (p_dev_rec->link_key_type == BTM_LKEY_TYPE_UNAUTH_COMB_P_256)) /* has unauthenticated link key */ && (p_dev_rec->rmt_io_caps < BTM_IO_CAP_MAX) /* a valid peer IO cap */ && (btm_sec_io_map[p_dev_rec->rmt_io_caps][btm_cb.devcb.loc_io_caps])) /* authenticated link key is possible */ { /* upgrade is possible: check if the application wants the upgrade. * If the application is configured to use a global MITM flag, * it probably would not want to upgrade the link key based on the * security level database */ is_possible = true; } } BTM_TRACE_DEBUG("%s() is_possible: %d sec_flags: 0x%x", __func__, is_possible, p_dev_rec->sec_flags); return is_possible; } /******************************************************************************* * * Function btm_sec_check_upgrade * * Description This function is called to check if the existing link key * needs to be upgraded. * * Returns void * ******************************************************************************/ static void btm_sec_check_upgrade(tBTM_SEC_DEV_REC* p_dev_rec, bool is_originator) { BTM_TRACE_DEBUG("%s()", __func__); /* Only check if link key already exists */ if (!(p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN)) return; if (btm_sec_is_upgrade_possible(p_dev_rec, is_originator)) { BTM_TRACE_DEBUG("need upgrade!! sec_flags:0x%x", p_dev_rec->sec_flags); /* upgrade is possible: check if the application wants the upgrade. * If the application is configured to use a global MITM flag, * it probably would not want to upgrade the link key based on the security * level database */ tBTM_SP_UPGRADE evt_data; evt_data.bd_addr = p_dev_rec->bd_addr; evt_data.upgrade = true; if (btm_cb.api.p_sp_callback) (*btm_cb.api.p_sp_callback)(BTM_SP_UPGRADE_EVT, (tBTM_SP_EVT_DATA*)&evt_data); BTM_TRACE_DEBUG("evt_data.upgrade:0x%x", evt_data.upgrade); if (evt_data.upgrade) { /* if the application confirms the upgrade, set the upgrade bit */ p_dev_rec->sm4 |= BTM_SM4_UPGRADE; /* Clear the link key known to go through authentication/pairing again */ p_dev_rec->sec_flags &= ~(BTM_SEC_LINK_KEY_KNOWN | BTM_SEC_LINK_KEY_AUTHED); p_dev_rec->sec_flags &= ~BTM_SEC_AUTHENTICATED; BTM_TRACE_DEBUG("sec_flags:0x%x", p_dev_rec->sec_flags); } } } /******************************************************************************* * * Function btm_sec_l2cap_access_req * * Description This function is called by the L2CAP to grant permission to * establish L2CAP connection to or from the peer device. * * Parameters: bd_addr - Address of the peer device * psm - L2CAP PSM * is_originator - true if protocol above L2CAP originates * connection * p_callback - Pointer to callback function called if * this function returns PENDING after required * procedures are complete. MUST NOT BE NULL. * * Returns tBTM_STATUS * ******************************************************************************/ tBTM_STATUS btm_sec_l2cap_access_req(const RawAddress& bd_addr, uint16_t psm, uint16_t handle, CONNECTION_TYPE conn_type, tBTM_SEC_CALLBACK* p_callback, void* p_ref_data) { tBTM_SEC_DEV_REC* p_dev_rec; tBTM_SEC_SERV_REC* p_serv_rec; uint16_t security_required; uint16_t old_security_required; bool old_is_originator; tBTM_STATUS rc = BTM_SUCCESS; bool chk_acp_auth_done = false; const bool is_originator = conn_type; constexpr tBT_TRANSPORT transport = BT_TRANSPORT_BR_EDR; /* should check PSM range in LE connection oriented L2CAP connection */ BTM_TRACE_DEBUG("%s() is_originator:%d, 0x%x, psm=0x%04x", __func__, is_originator, p_ref_data, psm); /* Find or get oldest record */ p_dev_rec = btm_find_or_alloc_dev(bd_addr); p_dev_rec->hci_handle = handle; /* Find the service record for the PSM */ p_serv_rec = btm_sec_find_first_serv(conn_type, psm); /* If there is no application registered with this PSM do not allow connection */ if (!p_serv_rec) { BTM_TRACE_WARNING("%s() PSM: %d no application registerd", __func__, psm); (*p_callback)(&bd_addr, transport, p_ref_data, BTM_MODE_UNSUPPORTED); return (BTM_MODE_UNSUPPORTED); } /* Services level0 by default have no security */ if ((btm_sec_is_serv_level0(psm)) && (!btm_cb.devcb.secure_connections_only)) { (*p_callback)(&bd_addr, transport, p_ref_data, BTM_SUCCESS_NO_SECURITY); return (BTM_SUCCESS); } if (btm_cb.security_mode == BTM_SEC_MODE_SC) { security_required = btm_sec_set_serv_level4_flags( p_serv_rec->security_flags, is_originator); } else { security_required = p_serv_rec->security_flags; } BTM_TRACE_DEBUG( "%s: security_required 0x%04x, is_originator 0x%02x, psm 0x%04x", __func__, security_required, is_originator, psm); if ((!is_originator) && (security_required & BTM_SEC_MODE4_LEVEL4)) { bool local_supports_sc = controller_get_interface()->supports_secure_connections(); /* acceptor receives L2CAP Channel Connect Request for Secure Connections * Only service */ if (!(local_supports_sc) || !(p_dev_rec->remote_supports_secure_connections)) { BTM_TRACE_DEBUG("%s: SC only service, local_support_for_sc %d", "rmt_support_for_sc : %d -> fail pairing", __func__, local_supports_sc, p_dev_rec->remote_supports_secure_connections); if (p_callback) (*p_callback)(&bd_addr, transport, (void*)p_ref_data, BTM_MODE4_LEVEL4_NOT_SUPPORTED); return (BTM_MODE4_LEVEL4_NOT_SUPPORTED); } } /* there are some devices (moto KRZR) which connects to several services at * the same time */ /* we will process one after another */ if ((p_dev_rec->p_callback) || (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)) { BTM_TRACE_EVENT("%s() - busy - PSM:%d delayed state: %s mode:%d, sm4:0x%x", __func__, psm, btm_pair_state_descr(btm_cb.pairing_state), btm_cb.security_mode, p_dev_rec->sm4); BTM_TRACE_EVENT("security_flags:x%x, sec_flags:x%x", security_required, p_dev_rec->sec_flags); rc = BTM_CMD_STARTED; if ((btm_cb.security_mode == BTM_SEC_MODE_UNDEFINED || btm_cb.security_mode == BTM_SEC_MODE_NONE || btm_cb.security_mode == BTM_SEC_MODE_SERVICE || btm_cb.security_mode == BTM_SEC_MODE_LINK) || (BTM_SM4_KNOWN == p_dev_rec->sm4) || (BTM_SEC_IS_SM4(p_dev_rec->sm4) && (!btm_sec_is_upgrade_possible(p_dev_rec, is_originator)))) { /* legacy mode - local is legacy or local is lisbon/peer is legacy * or SM4 with no possibility of link key upgrade */ if (is_originator) { if (((security_required & BTM_SEC_OUT_FLAGS) == 0) || ((((security_required & BTM_SEC_OUT_FLAGS) == BTM_SEC_OUT_AUTHENTICATE) && btm_dev_authenticated(p_dev_rec))) || ((((security_required & BTM_SEC_OUT_FLAGS) == (BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_ENCRYPT)) && btm_dev_encrypted(p_dev_rec))) || ((((security_required & BTM_SEC_OUT_FLAGS) == BTM_SEC_OUT_FLAGS) && btm_dev_authorized(p_dev_rec) && btm_dev_encrypted(p_dev_rec)))) { rc = BTM_SUCCESS; } } else { if (((security_required & BTM_SEC_IN_FLAGS) == 0) || (((security_required & BTM_SEC_IN_FLAGS) == BTM_SEC_IN_AUTHENTICATE) && btm_dev_authenticated(p_dev_rec)) || (((security_required & BTM_SEC_IN_FLAGS) == (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT)) && btm_dev_encrypted(p_dev_rec)) || (((security_required & BTM_SEC_IN_FLAGS) == BTM_SEC_IN_AUTHORIZE) && (btm_dev_authorized(p_dev_rec) || btm_serv_trusted(p_dev_rec, p_serv_rec))) || (((security_required & BTM_SEC_IN_FLAGS) == (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_AUTHORIZE)) && ((btm_dev_authorized(p_dev_rec) || btm_serv_trusted(p_dev_rec, p_serv_rec)) && btm_dev_authenticated(p_dev_rec))) || (((security_required & BTM_SEC_IN_FLAGS) == (BTM_SEC_IN_ENCRYPT | BTM_SEC_IN_AUTHORIZE)) && ((btm_dev_authorized(p_dev_rec) || btm_serv_trusted(p_dev_rec, p_serv_rec)) && btm_dev_encrypted(p_dev_rec))) || (((security_required & BTM_SEC_IN_FLAGS) == BTM_SEC_IN_FLAGS) && btm_dev_encrypted(p_dev_rec) && (btm_dev_authorized(p_dev_rec) || btm_serv_trusted(p_dev_rec, p_serv_rec)))) { // Check for 16 digits (or MITM) if (((security_required & BTM_SEC_IN_MIN_16_DIGIT_PIN) == 0) || (((security_required & BTM_SEC_IN_MIN_16_DIGIT_PIN) == BTM_SEC_IN_MIN_16_DIGIT_PIN) && btm_dev_16_digit_authenticated(p_dev_rec))) { rc = BTM_SUCCESS; } } } if ((rc == BTM_SUCCESS) && (security_required & BTM_SEC_MODE4_LEVEL4) && (p_dev_rec->link_key_type != BTM_LKEY_TYPE_AUTH_COMB_P_256)) { rc = BTM_CMD_STARTED; } if (rc == BTM_SUCCESS) { if (p_callback) (*p_callback)(&bd_addr, transport, (void*)p_ref_data, BTM_SUCCESS); return (BTM_SUCCESS); } } btm_cb.sec_req_pending = true; return (BTM_CMD_STARTED); } /* Save pointer to service record */ p_dev_rec->p_cur_service = p_serv_rec; /* Modify security_required in btm_sec_l2cap_access_req for Lisbon */ if (btm_cb.security_mode == BTM_SEC_MODE_SP || btm_cb.security_mode == BTM_SEC_MODE_SP_DEBUG || btm_cb.security_mode == BTM_SEC_MODE_SC) { if (BTM_SEC_IS_SM4(p_dev_rec->sm4)) { if (is_originator) { /* SM4 to SM4 -> always authenticate & encrypt */ security_required |= (BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_ENCRYPT); } else /* acceptor */ { /* SM4 to SM4: the acceptor needs to make sure the authentication is * already done */ chk_acp_auth_done = true; /* SM4 to SM4 -> always authenticate & encrypt */ security_required |= (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT); } } else if (!(BTM_SM4_KNOWN & p_dev_rec->sm4)) { /* the remote features are not known yet */ BTM_TRACE_DEBUG("%s: (%s) remote features unknown!!sec_flags:0x%02x", __func__, (is_originator) ? "initiator" : "acceptor", p_dev_rec->sec_flags); p_dev_rec->sm4 |= BTM_SM4_REQ_PEND; return (BTM_CMD_STARTED); } } BTM_TRACE_DEBUG( "%s() sm4:0x%x, sec_flags:0x%x, security_required:0x%x chk:%d", __func__, p_dev_rec->sm4, p_dev_rec->sec_flags, security_required, chk_acp_auth_done); old_security_required = p_dev_rec->security_required; old_is_originator = p_dev_rec->is_originator; p_dev_rec->security_required = security_required; p_dev_rec->p_ref_data = p_ref_data; p_dev_rec->is_originator = is_originator; /* If there are multiple service records used through the same PSM */ /* leave security decision for the multiplexor on the top */ if ((btm_sec_find_next_serv(p_serv_rec)) != NULL) { BTM_TRACE_DEBUG("no next_serv sm4:0x%x, chk:%d", p_dev_rec->sm4, chk_acp_auth_done); if (!BTM_SEC_IS_SM4(p_dev_rec->sm4)) { BTM_TRACE_EVENT( "Security Manager: l2cap_access_req PSM:%d postponed for multiplexer", psm); /* pre-Lisbon: restore the old settings */ p_dev_rec->security_required = old_security_required; p_dev_rec->is_originator = old_is_originator; (*p_callback)(&bd_addr, transport, p_ref_data, BTM_SUCCESS); return (BTM_SUCCESS); } } /* if the originator is using dynamic PSM in legacy mode, do not start any * security process now * The layer above L2CAP needs to carry out the security requirement after * L2CAP connect * response is received */ if (is_originator && ((btm_cb.security_mode == BTM_SEC_MODE_UNDEFINED || btm_cb.security_mode == BTM_SEC_MODE_NONE || btm_cb.security_mode == BTM_SEC_MODE_SERVICE || btm_cb.security_mode == BTM_SEC_MODE_LINK) || !BTM_SEC_IS_SM4(p_dev_rec->sm4)) && (psm >= 0x1001)) { BTM_TRACE_EVENT( "dynamic PSM:0x%x in legacy mode - postponed for upper layer", psm); /* restore the old settings */ p_dev_rec->security_required = old_security_required; p_dev_rec->is_originator = old_is_originator; (*p_callback)(&bd_addr, transport, p_ref_data, BTM_SUCCESS); return (BTM_SUCCESS); } if (chk_acp_auth_done) { BTM_TRACE_DEBUG( "(SM4 to SM4) btm_sec_l2cap_access_req rspd. authenticated: x%x, enc: " "x%x", (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED), (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED)); /* SM4, but we do not know for sure which level of security we need. * as long as we have a link key, it's OK */ if ((0 == (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED)) || (0 == (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED))) { rc = BTM_DELAY_CHECK; /* 2046 may report HCI_Encryption_Change and L2C Connection Request out of sequence because of data path issues. Delay this disconnect a little bit */ LOG_INFO( "%s peer should have initiated security process by now (SM4 to SM4)", __func__); p_dev_rec->p_callback = p_callback; p_dev_rec->sec_state = BTM_SEC_STATE_DELAY_FOR_ENC; (*p_callback)(&bd_addr, transport, p_ref_data, rc); return BTM_SUCCESS; } } p_dev_rec->p_callback = p_callback; if (p_dev_rec->last_author_service_id == BTM_SEC_NO_LAST_SERVICE_ID || p_dev_rec->last_author_service_id != p_dev_rec->p_cur_service->service_id) { /* Although authentication and encryption are per connection ** authorization is per access request. For example when serial connection ** is up and authorized and client requests to read file (access to other ** scn), we need to request user's permission again. */ p_dev_rec->sec_flags &= ~BTM_SEC_AUTHORIZED; } if (BTM_SEC_IS_SM4(p_dev_rec->sm4)) { if ((p_dev_rec->security_required & BTM_SEC_MODE4_LEVEL4) && (p_dev_rec->link_key_type != BTM_LKEY_TYPE_AUTH_COMB_P_256)) { /* BTM_LKEY_TYPE_AUTH_COMB_P_256 is the only acceptable key in this case */ if ((p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN) != 0) { p_dev_rec->sm4 |= BTM_SM4_UPGRADE; } p_dev_rec->sec_flags &= ~(BTM_SEC_LINK_KEY_KNOWN | BTM_SEC_LINK_KEY_AUTHED | BTM_SEC_AUTHENTICATED); BTM_TRACE_DEBUG("%s: sec_flags:0x%x", __func__, p_dev_rec->sec_flags); } else { /* If we already have a link key to the connected peer, is it secure * enough? */ btm_sec_check_upgrade(p_dev_rec, is_originator); } } BTM_TRACE_EVENT( "%s() PSM:%d Handle:%d State:%d Flags: 0x%x Required: 0x%x Service ID:%d", __func__, psm, handle, p_dev_rec->sec_state, p_dev_rec->sec_flags, p_dev_rec->security_required, p_dev_rec->p_cur_service->service_id); rc = btm_sec_execute_procedure(p_dev_rec); if (rc != BTM_CMD_STARTED) { BTM_TRACE_DEBUG("%s: p_dev_rec=%p, clearing callback. old p_callback=%p", __func__, p_dev_rec, p_dev_rec->p_callback); p_dev_rec->p_callback = NULL; (*p_callback)(&bd_addr, transport, p_dev_rec->p_ref_data, (uint8_t)rc); } return (rc); } /******************************************************************************* * * Function btm_sec_mx_access_request * * Description This function is called by all Multiplexing Protocols during * establishing connection to or from peer device to grant * permission to establish application connection. * * Parameters: bd_addr - Address of the peer device * psm - L2CAP PSM * is_originator - true if protocol above L2CAP originates * connection * mx_proto_id - protocol ID of the multiplexer * mx_chan_id - multiplexer channel to reach application * p_callback - Pointer to callback function called if * this function returns PENDING after required * procedures are completed * p_ref_data - Pointer to any reference data needed by the * the callback function. * * Returns BTM_CMD_STARTED * ******************************************************************************/ tBTM_STATUS btm_sec_mx_access_request(const RawAddress& bd_addr, uint16_t psm, bool is_originator, uint32_t mx_proto_id, uint32_t mx_chan_id, tBTM_SEC_CALLBACK* p_callback, void* p_ref_data) { tBTM_SEC_DEV_REC* p_dev_rec; tBTM_SEC_SERV_REC* p_serv_rec; tBTM_STATUS rc; uint16_t security_required; bool transport = false; /* should check PSM range in LE connection oriented L2CAP connection */ if (bluetooth::shim::is_gd_shim_enabled()) { return bluetooth::shim::btm_sec_mx_access_request( bd_addr, psm, is_originator, mx_proto_id, mx_chan_id, p_callback, p_ref_data); } BTM_TRACE_DEBUG("%s() is_originator: %d", __func__, is_originator); /* Find or get oldest record */ p_dev_rec = btm_find_or_alloc_dev(bd_addr); /* Find the service record for the PSM */ p_serv_rec = btm_sec_find_mx_serv(is_originator, psm, mx_proto_id, mx_chan_id); /* If there is no application registered with this PSM do not allow connection */ if (!p_serv_rec) { if (p_callback) (*p_callback)(&bd_addr, transport, p_ref_data, BTM_MODE_UNSUPPORTED); BTM_TRACE_ERROR( "Security Manager: MX service not found PSM:%d Proto:%d SCN:%d", psm, mx_proto_id, mx_chan_id); return BTM_NO_RESOURCES; } if ((btm_cb.security_mode == BTM_SEC_MODE_SC) && (!btm_sec_is_serv_level0(psm))) { security_required = btm_sec_set_serv_level4_flags( p_serv_rec->security_flags, is_originator); } else { security_required = p_serv_rec->security_flags; } /* there are some devices (moto phone) which connects to several services at * the same time */ /* we will process one after another */ if ((p_dev_rec->p_callback) || (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)) { BTM_TRACE_EVENT("%s() service PSM:%d Proto:%d SCN:%d delayed state: %s", __func__, psm, mx_proto_id, mx_chan_id, btm_pair_state_descr(btm_cb.pairing_state)); rc = BTM_CMD_STARTED; if ((btm_cb.security_mode == BTM_SEC_MODE_UNDEFINED || btm_cb.security_mode == BTM_SEC_MODE_NONE || btm_cb.security_mode == BTM_SEC_MODE_SERVICE || btm_cb.security_mode == BTM_SEC_MODE_LINK) || (BTM_SM4_KNOWN == p_dev_rec->sm4) || (BTM_SEC_IS_SM4(p_dev_rec->sm4) && (!btm_sec_is_upgrade_possible(p_dev_rec, is_originator)))) { /* legacy mode - local is legacy or local is lisbon/peer is legacy * or SM4 with no possibility of link key upgrade */ if (is_originator) { if (((security_required & BTM_SEC_OUT_FLAGS) == 0) || ((((security_required & BTM_SEC_OUT_FLAGS) == BTM_SEC_OUT_AUTHENTICATE) && btm_dev_authenticated(p_dev_rec))) || ((((security_required & BTM_SEC_OUT_FLAGS) == (BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_ENCRYPT)) && btm_dev_encrypted(p_dev_rec)))) { rc = BTM_SUCCESS; } } else { if (((security_required & BTM_SEC_IN_FLAGS) == 0) || ((((security_required & BTM_SEC_IN_FLAGS) == BTM_SEC_IN_AUTHENTICATE) && btm_dev_authenticated(p_dev_rec))) || (((security_required & BTM_SEC_IN_FLAGS) == BTM_SEC_IN_AUTHORIZE) && (btm_dev_authorized(p_dev_rec) || btm_serv_trusted(p_dev_rec, p_serv_rec))) || (((security_required & BTM_SEC_IN_FLAGS) == (BTM_SEC_IN_AUTHORIZE | BTM_SEC_IN_AUTHENTICATE)) && ((btm_dev_authorized(p_dev_rec) || btm_serv_trusted(p_dev_rec, p_serv_rec)) && btm_dev_authenticated(p_dev_rec))) || (((security_required & BTM_SEC_IN_FLAGS) == (BTM_SEC_IN_AUTHORIZE | BTM_SEC_IN_ENCRYPT)) && ((btm_dev_authorized(p_dev_rec) || btm_serv_trusted(p_dev_rec, p_serv_rec)) && btm_dev_encrypted(p_dev_rec))) || ((((security_required & BTM_SEC_IN_FLAGS) == (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT)) && btm_dev_encrypted(p_dev_rec)))) { // Check for 16 digits (or MITM) if (((security_required & BTM_SEC_IN_MIN_16_DIGIT_PIN) == 0) || (((security_required & BTM_SEC_IN_MIN_16_DIGIT_PIN) == BTM_SEC_IN_MIN_16_DIGIT_PIN) && btm_dev_16_digit_authenticated(p_dev_rec))) { rc = BTM_SUCCESS; } } } if ((rc == BTM_SUCCESS) && (security_required & BTM_SEC_MODE4_LEVEL4) && (p_dev_rec->link_key_type != BTM_LKEY_TYPE_AUTH_COMB_P_256)) { rc = BTM_CMD_STARTED; } } if (rc == BTM_SUCCESS) { BTM_TRACE_EVENT("%s: allow to bypass, checking authorization", __func__); /* the security in BTM_SEC_IN_FLAGS is fullfilled so far, check the * requirements in */ /* btm_sec_execute_procedure */ if ((is_originator && (p_serv_rec->security_flags & BTM_SEC_OUT_AUTHORIZE)) || (!is_originator && (p_serv_rec->security_flags & BTM_SEC_IN_AUTHORIZE))) { BTM_TRACE_EVENT("%s: still need authorization", __func__); rc = BTM_CMD_STARTED; } } /* Check whether there is a pending security procedure, if so we should * always queue */ /* the new security request */ if (p_dev_rec->sec_state != BTM_SEC_STATE_IDLE) { BTM_TRACE_EVENT("%s: There is a pending security procedure", __func__); rc = BTM_CMD_STARTED; } if (rc == BTM_CMD_STARTED) { BTM_TRACE_EVENT("%s: call btm_sec_queue_mx_request", __func__); btm_sec_queue_mx_request(bd_addr, psm, is_originator, mx_proto_id, mx_chan_id, p_callback, p_ref_data); } else /* rc == BTM_SUCCESS */ { /* access granted */ if (p_callback) { (*p_callback)(&bd_addr, transport, p_ref_data, (uint8_t)rc); } } BTM_TRACE_EVENT("%s: return with rc = 0x%02x in delayed state %s", __func__, rc, btm_pair_state_descr(btm_cb.pairing_state)); return rc; } if ((!is_originator) && ((security_required & BTM_SEC_MODE4_LEVEL4) || (btm_cb.security_mode == BTM_SEC_MODE_SC))) { bool local_supports_sc = controller_get_interface()->supports_secure_connections(); /* acceptor receives service connection establishment Request for */ /* Secure Connections Only service */ if (!(local_supports_sc) || !(p_dev_rec->remote_supports_secure_connections)) { BTM_TRACE_DEBUG("%s: SC only service,local_support_for_sc %d,", "remote_support_for_sc %d: fail pairing", __func__, local_supports_sc, p_dev_rec->remote_supports_secure_connections); if (p_callback) (*p_callback)(&bd_addr, transport, (void*)p_ref_data, BTM_MODE4_LEVEL4_NOT_SUPPORTED); return (BTM_MODE4_LEVEL4_NOT_SUPPORTED); } } p_dev_rec->p_cur_service = p_serv_rec; p_dev_rec->security_required = security_required; if (btm_cb.security_mode == BTM_SEC_MODE_SP || btm_cb.security_mode == BTM_SEC_MODE_SP_DEBUG || btm_cb.security_mode == BTM_SEC_MODE_SC) { if (BTM_SEC_IS_SM4(p_dev_rec->sm4)) { if ((p_dev_rec->security_required & BTM_SEC_MODE4_LEVEL4) && (p_dev_rec->link_key_type != BTM_LKEY_TYPE_AUTH_COMB_P_256)) { /* BTM_LKEY_TYPE_AUTH_COMB_P_256 is the only acceptable key in this case */ if ((p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN) != 0) { p_dev_rec->sm4 |= BTM_SM4_UPGRADE; } p_dev_rec->sec_flags &= ~(BTM_SEC_LINK_KEY_KNOWN | BTM_SEC_LINK_KEY_AUTHED | BTM_SEC_AUTHENTICATED); BTM_TRACE_DEBUG("%s: sec_flags:0x%x", __func__, p_dev_rec->sec_flags); } else { /* If we already have a link key, check if that link key is good enough */ btm_sec_check_upgrade(p_dev_rec, is_originator); } } } p_dev_rec->is_originator = is_originator; p_dev_rec->p_callback = p_callback; p_dev_rec->p_ref_data = p_ref_data; /* Although authentication and encryption are per connection */ /* authorization is per access request. For example when serial connection */ /* is up and authorized and client requests to read file (access to other */ /* scn, we need to request user's permission again. */ p_dev_rec->sec_flags &= ~(BTM_SEC_AUTHORIZED); BTM_TRACE_EVENT( "%s() proto_id:%d chan_id:%d State:%d Flags:0x%x Required:0x%x Service " "ID:%d", __func__, mx_proto_id, mx_chan_id, p_dev_rec->sec_state, p_dev_rec->sec_flags, p_dev_rec->security_required, p_dev_rec->p_cur_service->service_id); rc = btm_sec_execute_procedure(p_dev_rec); if (rc != BTM_CMD_STARTED) { if (p_callback) { p_dev_rec->p_callback = NULL; (*p_callback)(&bd_addr, transport, p_ref_data, (uint8_t)rc); } } return rc; } /******************************************************************************* * * Function btm_sec_conn_req * * Description This function is when the peer device is requesting * connection * * Returns void * ******************************************************************************/ void btm_sec_conn_req(const RawAddress& bda, uint8_t* dc) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev(bda); /* Some device may request a connection before we are done with the HCI_Reset * sequence */ if (!controller_get_interface()->get_is_ready()) { BTM_TRACE_EVENT("Security Manager: connect request when device not ready"); btsnd_hcic_reject_conn(bda, HCI_ERR_HOST_REJECT_DEVICE); return; } /* Security guys wants us not to allow connection from not paired devices */ /* Check if connection is allowed for only paired devices */ if (btm_cb.connect_only_paired) { if (!p_dev_rec || !(p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_AUTHED)) { BTM_TRACE_EVENT( "Security Manager: connect request from non-paired device"); btsnd_hcic_reject_conn(bda, HCI_ERR_HOST_REJECT_DEVICE); return; } } #if (BTM_ALLOW_CONN_IF_NONDISCOVER == FALSE) /* If non-discoverable, only allow known devices to connect */ if (btm_cb.btm_inq_vars.discoverable_mode == BTM_NON_DISCOVERABLE) { if (!p_dev_rec) { BTM_TRACE_EVENT( "Security Manager: connect request from not paired device"); btsnd_hcic_reject_conn(bda, HCI_ERR_HOST_REJECT_DEVICE); return; } } #endif if ((btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) && (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) && (btm_cb.pairing_bda == bda)) { BTM_TRACE_EVENT( "Security Manager: reject connect request from bonding device"); /* incoming connection from bonding device is rejected */ btm_cb.pairing_flags |= BTM_PAIR_FLAGS_REJECTED_CONNECT; btsnd_hcic_reject_conn(bda, HCI_ERR_HOST_REJECT_DEVICE); return; } /* Host is not interested or approved connection. Save BDA and DC and */ /* pass request to L2CAP */ btm_cb.connecting_bda = bda; memcpy(btm_cb.connecting_dc, dc, DEV_CLASS_LEN); if (l2c_link_hci_conn_req(bda)) { if (!p_dev_rec) { /* accept the connection -> allocate a device record */ p_dev_rec = btm_sec_alloc_dev(bda); } if (p_dev_rec) { p_dev_rec->sm4 |= BTM_SM4_CONN_PEND; } } } /******************************************************************************* * * Function btm_sec_bond_cancel_complete * * Description This function is called to report bond cancel complete * event. * * Returns void * ******************************************************************************/ static void btm_sec_bond_cancel_complete(void) { tBTM_SEC_DEV_REC* p_dev_rec; if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_DISC_WHEN_DONE) || (BTM_PAIR_STATE_WAIT_LOCAL_PIN == btm_cb.pairing_state && BTM_PAIR_FLAGS_WE_STARTED_DD & btm_cb.pairing_flags) || (btm_cb.pairing_state == BTM_PAIR_STATE_GET_REM_NAME && BTM_PAIR_FLAGS_WE_CANCEL_DD & btm_cb.pairing_flags)) { /* for dedicated bonding in legacy mode, authentication happens at "link * level" * btm_sec_connected is called with failed status. * In theory, the code that handles is_pairing_device/true should clean out * security related code. * However, this function may clean out the security related flags and * btm_sec_connected would not know * this function also needs to do proper clean up. */ p_dev_rec = btm_find_dev(btm_cb.pairing_bda); if (p_dev_rec != NULL) p_dev_rec->security_required = BTM_SEC_NONE; btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); /* Notify application that the cancel succeeded */ if (btm_cb.api.p_bond_cancel_cmpl_callback) btm_cb.api.p_bond_cancel_cmpl_callback(BTM_SUCCESS); } } /******************************************************************************* * * Function btm_create_conn_cancel_complete * * Description This function is called when the command complete message * is received from the HCI for the create connection cancel * command. * * Returns void * ******************************************************************************/ void btm_create_conn_cancel_complete(uint8_t* p) { uint8_t status; STREAM_TO_UINT8(status, p); RawAddress bd_addr; STREAM_TO_BDADDR(bd_addr, p); BTM_TRACE_EVENT("btm_create_conn_cancel_complete(): in State: %s status:%d", btm_pair_state_descr(btm_cb.pairing_state), status); bluetooth::common::LogLinkLayerConnectionEvent( &bd_addr, bluetooth::common::kUnknownConnectionHandle, android::bluetooth::DIRECTION_OUTGOING, android::bluetooth::LINK_TYPE_ACL, android::bluetooth::hci::CMD_CREATE_CONNECTION_CANCEL, android::bluetooth::hci::EVT_COMMAND_COMPLETE, android::bluetooth::hci::BLE_EVT_UNKNOWN, status, android::bluetooth::hci::STATUS_UNKNOWN); /* if the create conn cancel cmd was issued by the bond cancel, ** the application needs to be notified that bond cancel succeeded */ switch (status) { case HCI_SUCCESS: btm_sec_bond_cancel_complete(); break; case HCI_ERR_CONNECTION_EXISTS: case HCI_ERR_NO_CONNECTION: default: /* Notify application of the error */ if (btm_cb.api.p_bond_cancel_cmpl_callback) btm_cb.api.p_bond_cancel_cmpl_callback(BTM_ERR_PROCESSING); break; } } /******************************************************************************* * * Function btm_sec_check_pending_reqs * * Description This function is called at the end of the security procedure * to let L2CAP and RFCOMM know to re-submit any pending * requests * * Returns void * ******************************************************************************/ void btm_sec_check_pending_reqs(void) { if (btm_cb.pairing_state == BTM_PAIR_STATE_IDLE) { /* First, resubmit L2CAP requests */ if (btm_cb.sec_req_pending) { btm_cb.sec_req_pending = false; l2cu_resubmit_pending_sec_req(nullptr); } /* Now, re-submit anything in the mux queue */ fixed_queue_t* bq = btm_cb.sec_pending_q; btm_cb.sec_pending_q = fixed_queue_new(SIZE_MAX); tBTM_SEC_QUEUE_ENTRY* p_e; while ((p_e = (tBTM_SEC_QUEUE_ENTRY*)fixed_queue_try_dequeue(bq)) != NULL) { /* Check that the ACL is still up before starting security procedures */ if (btm_bda_to_acl(p_e->bd_addr, p_e->transport) != NULL) { if (p_e->psm != 0) { BTM_TRACE_EVENT( "%s PSM:0x%04x Is_Orig:%u mx_proto_id:%u mx_chan_id:%u", __func__, p_e->psm, p_e->is_orig, p_e->mx_proto_id, p_e->mx_chan_id); btm_sec_mx_access_request(p_e->bd_addr, p_e->psm, p_e->is_orig, p_e->mx_proto_id, p_e->mx_chan_id, p_e->p_callback, p_e->p_ref_data); } else { BTM_SetEncryption(p_e->bd_addr, p_e->transport, p_e->p_callback, p_e->p_ref_data, p_e->sec_act); } } osi_free(p_e); } fixed_queue_free(bq, NULL); } } /******************************************************************************* * * Function btm_sec_init * * Description This function is on the SEC startup * * Returns void * ******************************************************************************/ void btm_sec_init(uint8_t sec_mode) { btm_cb.security_mode = sec_mode; btm_cb.pairing_bda = RawAddress::kAny; } /******************************************************************************* * * Function btm_sec_device_down * * Description This function should be called when device is disabled or * turned off * * Returns void * ******************************************************************************/ void btm_sec_device_down(void) { BTM_TRACE_EVENT("%s() State: %s", __func__, btm_pair_state_descr(btm_cb.pairing_state)); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); } /******************************************************************************* * * Function btm_sec_dev_reset * * Description This function should be called after device reset * * Returns void * ******************************************************************************/ void btm_sec_dev_reset(void) { if (controller_get_interface()->supports_simple_pairing()) { /* set the default IO capabilities */ btm_cb.devcb.loc_io_caps = btif_storage_get_local_io_caps(); /* add mx service to use no security */ BTM_SetSecurityLevel(false, "RFC_MUX", BTM_SEC_SERVICE_RFC_MUX, BTM_SEC_NONE, BT_PSM_RFCOMM, BTM_SEC_PROTO_RFCOMM, 0); } else { btm_cb.security_mode = BTM_SEC_MODE_SERVICE; } BTM_TRACE_DEBUG("btm_sec_dev_reset sec mode: %d", btm_cb.security_mode); } /******************************************************************************* * * Function btm_sec_abort_access_req * * Description This function is called by the L2CAP or RFCOMM to abort * the pending operation. * * Parameters: bd_addr - Address of the peer device * * Returns void * ******************************************************************************/ void btm_sec_abort_access_req(const RawAddress& bd_addr) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev(bd_addr); if (!p_dev_rec) return; if ((p_dev_rec->sec_state != BTM_SEC_STATE_AUTHORIZING) && (p_dev_rec->sec_state != BTM_SEC_STATE_AUTHENTICATING)) return; p_dev_rec->sec_state = BTM_SEC_STATE_IDLE; BTM_TRACE_DEBUG("%s: clearing callback. p_dev_rec=%p, p_callback=%p", __func__, p_dev_rec, p_dev_rec->p_callback); p_dev_rec->p_callback = NULL; } /******************************************************************************* * * Function btm_sec_dd_create_conn * * Description This function is called to create the ACL connection for * the dedicated boding process * * Returns void * ******************************************************************************/ static tBTM_STATUS btm_sec_dd_create_conn(tBTM_SEC_DEV_REC* p_dev_rec) { tL2C_LCB* p_lcb = l2cu_find_lcb_by_bd_addr(p_dev_rec->bd_addr, BT_TRANSPORT_BR_EDR); if (p_lcb && (p_lcb->link_state == LST_CONNECTED || p_lcb->link_state == LST_CONNECTING)) { BTM_TRACE_WARNING("%s Connection already exists", __func__); btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_PIN_REQ); return BTM_CMD_STARTED; } /* Make sure an L2cap link control block is available */ if (!p_lcb && (p_lcb = l2cu_allocate_lcb(p_dev_rec->bd_addr, true, BT_TRANSPORT_BR_EDR)) == NULL) { LOG(WARNING) << "Security Manager: failed allocate LCB " << p_dev_rec->bd_addr; return (BTM_NO_RESOURCES); } /* set up the control block to indicated dedicated bonding */ btm_cb.pairing_flags |= BTM_PAIR_FLAGS_DISC_WHEN_DONE; if (!l2cu_create_conn_br_edr(p_lcb)) { LOG(WARNING) << "Security Manager: failed create allocate LCB " << p_dev_rec->bd_addr; l2cu_release_lcb(p_lcb); return (BTM_NO_RESOURCES); } btm_acl_update_busy_level(BTM_BLI_PAGE_EVT); VLOG(1) << "Security Manager: " << p_dev_rec->bd_addr; btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_PIN_REQ); return (BTM_CMD_STARTED); } bool is_state_getting_name(void* data, void* context) { tBTM_SEC_DEV_REC* p_dev_rec = static_cast(data); if (p_dev_rec->sec_state == BTM_SEC_STATE_GETTING_NAME) { return false; } return true; } /******************************************************************************* * * Function btm_sec_rmt_name_request_complete * * Description This function is called when remote name was obtained from * the peer device * * Returns void * ******************************************************************************/ void btm_sec_rmt_name_request_complete(const RawAddress* p_bd_addr, uint8_t* p_bd_name, uint8_t status) { tBTM_SEC_DEV_REC* p_dev_rec; int i; DEV_CLASS dev_class; uint8_t old_sec_state; BTM_TRACE_EVENT("btm_sec_rmt_name_request_complete"); if ((!p_bd_addr && !BTM_ACL_IS_CONNECTED(btm_cb.connecting_bda)) || (p_bd_addr && !BTM_ACL_IS_CONNECTED(*p_bd_addr))) { btm_acl_resubmit_page(); } /* If remote name request failed, p_bd_addr is null and we need to search */ /* based on state assuming that we are doing 1 at a time */ if (p_bd_addr) p_dev_rec = btm_find_dev(*p_bd_addr); else { list_node_t* node = list_foreach(btm_cb.sec_dev_rec, is_state_getting_name, NULL); if (node != NULL) { p_dev_rec = static_cast(list_node(node)); p_bd_addr = &p_dev_rec->bd_addr; } else { p_dev_rec = NULL; } } /* Commenting out trace due to obf/compilation problems. */ if (!p_bd_name) p_bd_name = (uint8_t*)""; if (p_dev_rec) { BTM_TRACE_EVENT( "%s PairState: %s RemName: %s status: %d State:%d p_dev_rec: " "0x%08x ", __func__, btm_pair_state_descr(btm_cb.pairing_state), p_bd_name, status, p_dev_rec->sec_state, p_dev_rec); } else { BTM_TRACE_EVENT("%s PairState: %s RemName: %s status: %d", __func__, btm_pair_state_descr(btm_cb.pairing_state), p_bd_name, status); } if (p_dev_rec) { old_sec_state = p_dev_rec->sec_state; if (status == HCI_SUCCESS) { strlcpy((char*)p_dev_rec->sec_bd_name, (char*)p_bd_name, BTM_MAX_REM_BD_NAME_LEN); p_dev_rec->sec_flags |= BTM_SEC_NAME_KNOWN; BTM_TRACE_EVENT("setting BTM_SEC_NAME_KNOWN sec_flags:0x%x", p_dev_rec->sec_flags); } else { /* Notify all clients waiting for name to be resolved even if it failed so * clients can continue */ p_dev_rec->sec_bd_name[0] = 0; } if (p_dev_rec->sec_state == BTM_SEC_STATE_GETTING_NAME) p_dev_rec->sec_state = BTM_SEC_STATE_IDLE; /* Notify all clients waiting for name to be resolved */ for (i = 0; i < BTM_SEC_MAX_RMT_NAME_CALLBACKS; i++) { if (btm_cb.p_rmt_name_callback[i] && p_bd_addr) (*btm_cb.p_rmt_name_callback[i])(*p_bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name); } } else { dev_class[0] = 0; dev_class[1] = 0; dev_class[2] = 0; /* Notify all clients waiting for name to be resolved even if not found so * clients can continue */ for (i = 0; i < BTM_SEC_MAX_RMT_NAME_CALLBACKS; i++) { if (btm_cb.p_rmt_name_callback[i] && p_bd_addr) (*btm_cb.p_rmt_name_callback[i])(*p_bd_addr, dev_class, (uint8_t*)""); } return; } /* If we were delaying asking UI for a PIN because name was not resolved, ask * now */ if ((btm_cb.pairing_state == BTM_PAIR_STATE_WAIT_LOCAL_PIN) && p_bd_addr && (btm_cb.pairing_bda == *p_bd_addr)) { BTM_TRACE_EVENT( "%s() delayed pin now being requested flags:0x%x, " "(p_pin_callback=0x%p)", __func__, btm_cb.pairing_flags, btm_cb.api.p_pin_callback); if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_PIN_REQD) == 0 && btm_cb.api.p_pin_callback) { BTM_TRACE_EVENT("%s() calling pin_callback", __func__); btm_cb.pairing_flags |= BTM_PAIR_FLAGS_PIN_REQD; (*btm_cb.api.p_pin_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_bd_name, (p_dev_rec->p_cur_service == NULL) ? false : (p_dev_rec->p_cur_service->security_flags & BTM_SEC_IN_MIN_16_DIGIT_PIN)); } /* Set the same state again to force the timer to be restarted */ btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_LOCAL_PIN); return; } /* Check if we were delaying bonding because name was not resolved */ if (btm_cb.pairing_state == BTM_PAIR_STATE_GET_REM_NAME) { if (p_bd_addr && btm_cb.pairing_bda == *p_bd_addr) { BTM_TRACE_EVENT("%s() continue bonding sm4: 0x%04x, status:0x%x", __func__, p_dev_rec->sm4, status); if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_CANCEL_DD) { btm_sec_bond_cancel_complete(); return; } if (status != HCI_SUCCESS) { btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); if (btm_cb.api.p_auth_complete_callback) (*btm_cb.api.p_auth_complete_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, status); return; } /* if peer is very old legacy devices, HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT is * not reported */ if (BTM_SEC_IS_SM4_UNKNOWN(p_dev_rec->sm4)) { /* set the KNOWN flag only if BTM_PAIR_FLAGS_REJECTED_CONNECT is not * set.*/ /* If it is set, there may be a race condition */ BTM_TRACE_DEBUG("%s IS_SM4_UNKNOWN Flags:0x%04x", __func__, btm_cb.pairing_flags); if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_REJECTED_CONNECT) == 0) p_dev_rec->sm4 |= BTM_SM4_KNOWN; } BTM_TRACE_DEBUG("%s, SM4 Value: %x, Legacy:%d,IS SM4:%d, Unknown:%d", __func__, p_dev_rec->sm4, BTM_SEC_IS_SM4_LEGACY(p_dev_rec->sm4), BTM_SEC_IS_SM4(p_dev_rec->sm4), BTM_SEC_IS_SM4_UNKNOWN(p_dev_rec->sm4)); /* BT 2.1 or carkit, bring up the connection to force the peer to request *PIN. ** Else prefetch (btm_sec_check_prefetch_pin will do the prefetching if *needed) */ if ((p_dev_rec->sm4 != BTM_SM4_KNOWN) || !btm_sec_check_prefetch_pin(p_dev_rec)) { /* if we rejected incoming connection request, we have to wait * HCI_Connection_Complete event */ /* before originating */ if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_REJECTED_CONNECT) { BTM_TRACE_WARNING( "%s: waiting HCI_Connection_Complete after rejecting connection", __func__); } /* Both we and the peer are 2.1 - continue to create connection */ else if (btm_sec_dd_create_conn(p_dev_rec) != BTM_CMD_STARTED) { BTM_TRACE_WARNING("%s: failed to start connection", __func__); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); if (btm_cb.api.p_auth_complete_callback) { (*btm_cb.api.p_auth_complete_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, HCI_ERR_MEMORY_FULL); } } } return; } else { BTM_TRACE_WARNING("%s: wrong BDA, retry with pairing BDA", __func__); if (BTM_ReadRemoteDeviceName(btm_cb.pairing_bda, NULL, BT_TRANSPORT_BR_EDR) != BTM_CMD_STARTED) { BTM_TRACE_ERROR("%s: failed to start remote name request", __func__); if (btm_cb.api.p_auth_complete_callback) { (*btm_cb.api.p_auth_complete_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, HCI_ERR_MEMORY_FULL); } }; return; } } /* check if we were delaying link_key_callback because name was not resolved */ if (p_dev_rec->link_key_not_sent) { /* If HCI connection complete has not arrived, wait for it */ if (p_dev_rec->hci_handle == BTM_SEC_INVALID_HANDLE) return; p_dev_rec->link_key_not_sent = false; btm_send_link_key_notif(p_dev_rec); /* If its not us who perform authentication, we should tell stackserver */ /* that some authentication has been completed */ /* This is required when different entities receive link notification and * auth complete */ if (!(p_dev_rec->security_required & BTM_SEC_OUT_AUTHENTICATE)) { if (btm_cb.api.p_auth_complete_callback) (*btm_cb.api.p_auth_complete_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, HCI_SUCCESS); } } /* If this is a bonding procedure can disconnect the link now */ if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) && (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED)) { BTM_TRACE_WARNING("btm_sec_rmt_name_request_complete (none/ce)"); p_dev_rec->security_required &= ~(BTM_SEC_OUT_AUTHENTICATE); l2cu_start_post_bond_timer(p_dev_rec->hci_handle); return; } if (old_sec_state != BTM_SEC_STATE_GETTING_NAME) return; /* If get name failed, notify the waiting layer */ if (status != HCI_SUCCESS) { btm_sec_dev_rec_cback_event(p_dev_rec, BTM_ERR_PROCESSING, false); return; } if (p_dev_rec->sm4 & BTM_SM4_REQ_PEND) { BTM_TRACE_EVENT("waiting for remote features!!"); return; } /* Remote Name succeeded, execute the next security procedure, if any */ status = (uint8_t)btm_sec_execute_procedure(p_dev_rec); /* If result is pending reply from the user or from the device is pending */ if (status == BTM_CMD_STARTED) return; /* There is no next procedure or start of procedure failed, notify the waiting * layer */ btm_sec_dev_rec_cback_event(p_dev_rec, status, false); } /******************************************************************************* * * Function btm_sec_rmt_host_support_feat_evt * * Description This function is called when the * HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT is received * * Returns void * ******************************************************************************/ void btm_sec_rmt_host_support_feat_evt(uint8_t* p) { tBTM_SEC_DEV_REC* p_dev_rec; RawAddress bd_addr; /* peer address */ BD_FEATURES features; STREAM_TO_BDADDR(bd_addr, p); p_dev_rec = btm_find_or_alloc_dev(bd_addr); BTM_TRACE_EVENT("btm_sec_rmt_host_support_feat_evt sm4: 0x%x p[0]: 0x%x", p_dev_rec->sm4, p[0]); if (BTM_SEC_IS_SM4_UNKNOWN(p_dev_rec->sm4)) { p_dev_rec->sm4 = BTM_SM4_KNOWN; STREAM_TO_ARRAY(features, p, HCI_FEATURE_BYTES_PER_PAGE); if (HCI_SSP_HOST_SUPPORTED(features)) { p_dev_rec->sm4 = BTM_SM4_TRUE; } BTM_TRACE_EVENT( "btm_sec_rmt_host_support_feat_evt sm4: 0x%x features[0]: 0x%x", p_dev_rec->sm4, features[0]); } } /******************************************************************************* * * Function btm_io_capabilities_req * * Description This function is called when LM request for the IO * capability of the local device and * if the OOB data is present for the device in the event * * Returns void * ******************************************************************************/ void btm_io_capabilities_req(const RawAddress& p) { tBTM_SP_IO_REQ evt_data; uint8_t err_code = 0; tBTM_SEC_DEV_REC* p_dev_rec; bool is_orig = true; uint8_t callback_rc = BTM_SUCCESS; evt_data.bd_addr = p; /* setup the default response according to compile options */ /* assume that the local IO capability does not change * loc_io_caps is initialized with the default value */ evt_data.io_cap = btm_cb.devcb.loc_io_caps; evt_data.oob_data = BTM_OOB_NONE; evt_data.auth_req = BTM_DEFAULT_AUTH_REQ; BTM_TRACE_EVENT("%s: State: %s", __func__, btm_pair_state_descr(btm_cb.pairing_state)); p_dev_rec = btm_find_or_alloc_dev(evt_data.bd_addr); BTM_TRACE_DEBUG("%s:Security mode: %d, Num Read Remote Feat pages: %d", __func__, btm_cb.security_mode, p_dev_rec->num_read_pages); if ((btm_cb.security_mode == BTM_SEC_MODE_SC) && (p_dev_rec->num_read_pages == 0)) { BTM_TRACE_EVENT("%s: Device security mode is SC only.", "To continue need to know remote features.", __func__); p_dev_rec->remote_features_needed = true; return; } p_dev_rec->sm4 |= BTM_SM4_TRUE; BTM_TRACE_EVENT("%s: State: %s Flags: 0x%04x p_cur_service: 0x%08x", __func__, btm_pair_state_descr(btm_cb.pairing_state), btm_cb.pairing_flags, p_dev_rec->p_cur_service); if (p_dev_rec->p_cur_service) { BTM_TRACE_EVENT("%s: cur_service psm: 0x%04x, security_flags: 0x%04x", __func__, p_dev_rec->p_cur_service->psm, p_dev_rec->p_cur_service->security_flags); } switch (btm_cb.pairing_state) { /* initiator connecting */ case BTM_PAIR_STATE_IDLE: // TODO: Handle Idle pairing state // security_required = p_dev_rec->security_required; break; /* received IO capability response already->acceptor */ case BTM_PAIR_STATE_INCOMING_SSP: is_orig = false; if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_PEER_STARTED_DD) { /* acceptor in dedicated bonding */ evt_data.auth_req = BTM_DEFAULT_DD_AUTH_REQ; } break; /* initiator, at this point it is expected to be dedicated bonding initiated by local device */ case BTM_PAIR_STATE_WAIT_PIN_REQ: if (evt_data.bd_addr == btm_cb.pairing_bda) { evt_data.auth_req = BTM_DEFAULT_DD_AUTH_REQ; } else { err_code = HCI_ERR_HOST_BUSY_PAIRING; } break; /* any other state is unexpected */ default: err_code = HCI_ERR_HOST_BUSY_PAIRING; BTM_TRACE_ERROR("%s: Unexpected Pairing state received %d", __func__, btm_cb.pairing_state); break; } if (btm_cb.pairing_disabled) { /* pairing is not allowed */ BTM_TRACE_DEBUG("%s: Pairing is not allowed -> fail pairing.", __func__); err_code = HCI_ERR_PAIRING_NOT_ALLOWED; } else if (btm_cb.security_mode == BTM_SEC_MODE_SC) { bool local_supports_sc = controller_get_interface()->supports_secure_connections(); /* device in Secure Connections Only mode */ if (!(local_supports_sc) || !(p_dev_rec->remote_supports_secure_connections)) { BTM_TRACE_DEBUG("%s: SC only service, local_support_for_sc %d,", " remote_support_for_sc 0x%02x -> fail pairing", __func__, local_supports_sc, p_dev_rec->remote_supports_secure_connections); err_code = HCI_ERR_PAIRING_NOT_ALLOWED; } } if (err_code != 0) { btsnd_hcic_io_cap_req_neg_reply(evt_data.bd_addr, err_code); return; } evt_data.is_orig = is_orig; if (is_orig) { /* local device initiated the pairing non-bonding -> use p_cur_service */ if (!(btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) && p_dev_rec->p_cur_service && (p_dev_rec->p_cur_service->security_flags & BTM_SEC_OUT_AUTHENTICATE)) { if (btm_cb.security_mode == BTM_SEC_MODE_SC) { /* SC only mode device requires MITM protection */ evt_data.auth_req = BTM_AUTH_SP_YES; } else { evt_data.auth_req = (p_dev_rec->p_cur_service->security_flags & BTM_SEC_OUT_MITM) ? BTM_AUTH_SP_YES : BTM_AUTH_SP_NO; } } } /* Notify L2CAP to increase timeout */ l2c_pin_code_request(evt_data.bd_addr); btm_cb.pairing_bda = evt_data.bd_addr; if (evt_data.bd_addr == btm_cb.connecting_bda) memcpy(p_dev_rec->dev_class, btm_cb.connecting_dc, DEV_CLASS_LEN); btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS); callback_rc = BTM_SUCCESS; if (p_dev_rec->sm4 & BTM_SM4_UPGRADE) { p_dev_rec->sm4 &= ~BTM_SM4_UPGRADE; /* link key upgrade: always use SPGB_YES - assuming we want to save the link * key */ evt_data.auth_req = BTM_AUTH_SPGB_YES; } else if (btm_cb.api.p_sp_callback) { /* the callback function implementation may change the IO capability... */ callback_rc = (*btm_cb.api.p_sp_callback)(BTM_SP_IO_REQ_EVT, (tBTM_SP_EVT_DATA*)&evt_data); } if ((callback_rc == BTM_SUCCESS) || (BTM_OOB_UNKNOWN != evt_data.oob_data)) { if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)) { evt_data.auth_req = (BTM_AUTH_DD_BOND | (evt_data.auth_req & BTM_AUTH_YN_BIT)); } if (btm_cb.security_mode == BTM_SEC_MODE_SC) { /* At this moment we know that both sides are SC capable, device in */ /* SC only mode requires MITM for any service so let's set MITM bit */ evt_data.auth_req |= BTM_AUTH_YN_BIT; BTM_TRACE_DEBUG( "%s: for device in \"SC only\" mode set auth_req to 0x%02x", __func__, evt_data.auth_req); } /* if the user does not indicate "reply later" by setting the oob_data to * unknown */ /* send the response right now. Save the current IO capability in the * control block */ btm_cb.devcb.loc_auth_req = evt_data.auth_req; btm_cb.devcb.loc_io_caps = evt_data.io_cap; BTM_TRACE_EVENT("%s: State: %s IO_CAP:%d oob_data:%d auth_req:%d", __func__, btm_pair_state_descr(btm_cb.pairing_state), evt_data.io_cap, evt_data.oob_data, evt_data.auth_req); btsnd_hcic_io_cap_req_reply(evt_data.bd_addr, evt_data.io_cap, evt_data.oob_data, evt_data.auth_req); } } /******************************************************************************* * * Function btm_io_capabilities_rsp * * Description This function is called when the IO capability of the * specified device is received * * Returns void * ******************************************************************************/ void btm_io_capabilities_rsp(uint8_t* p) { tBTM_SEC_DEV_REC* p_dev_rec; tBTM_SP_IO_RSP evt_data; STREAM_TO_BDADDR(evt_data.bd_addr, p); STREAM_TO_UINT8(evt_data.io_cap, p); STREAM_TO_UINT8(evt_data.oob_data, p); STREAM_TO_UINT8(evt_data.auth_req, p); /* Allocate a new device record or reuse the oldest one */ p_dev_rec = btm_find_or_alloc_dev(evt_data.bd_addr); /* If no security is in progress, this indicates incoming security */ if (btm_cb.pairing_state == BTM_PAIR_STATE_IDLE) { btm_cb.pairing_bda = evt_data.bd_addr; btm_sec_change_pairing_state(BTM_PAIR_STATE_INCOMING_SSP); /* Make sure we reset the trusted mask to help against attacks */ BTM_SEC_CLR_TRUSTED_DEVICE(p_dev_rec->trusted_mask); /* work around for FW bug */ btm_inq_stop_on_ssp(); } /* Notify L2CAP to increase timeout */ l2c_pin_code_request(evt_data.bd_addr); /* We must have a device record here. * Use the connecting device's CoD for the connection */ if (evt_data.bd_addr == btm_cb.connecting_bda) memcpy(p_dev_rec->dev_class, btm_cb.connecting_dc, DEV_CLASS_LEN); /* peer sets dedicated bonding bit and we did not initiate dedicated bonding */ if (btm_cb.pairing_state == BTM_PAIR_STATE_INCOMING_SSP /* peer initiated bonding */ && (evt_data.auth_req & BTM_AUTH_DD_BOND)) /* and dedicated bonding bit is set */ { btm_cb.pairing_flags |= BTM_PAIR_FLAGS_PEER_STARTED_DD; } /* save the IO capability in the device record */ p_dev_rec->rmt_io_caps = evt_data.io_cap; p_dev_rec->rmt_auth_req = evt_data.auth_req; if (btm_cb.api.p_sp_callback) (*btm_cb.api.p_sp_callback)(BTM_SP_IO_RSP_EVT, (tBTM_SP_EVT_DATA*)&evt_data); } /******************************************************************************* * * Function btm_proc_sp_req_evt * * Description This function is called to process/report * HCI_USER_CONFIRMATION_REQUEST_EVT * or HCI_USER_PASSKEY_REQUEST_EVT * or HCI_USER_PASSKEY_NOTIFY_EVT * * Returns void * ******************************************************************************/ void btm_proc_sp_req_evt(tBTM_SP_EVT event, uint8_t* p) { tBTM_STATUS status = BTM_ERR_PROCESSING; tBTM_SP_EVT_DATA evt_data; RawAddress& p_bda = evt_data.cfm_req.bd_addr; tBTM_SEC_DEV_REC* p_dev_rec; /* All events start with bd_addr */ STREAM_TO_BDADDR(p_bda, p); VLOG(2) << " BDA: " << p_bda << " event: 0x" << std::hex << +event << " State: " << btm_pair_state_descr(btm_cb.pairing_state); p_dev_rec = btm_find_dev(p_bda); if ((p_dev_rec != NULL) && (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) && (btm_cb.pairing_bda == p_bda)) { evt_data.cfm_req.bd_addr = p_dev_rec->bd_addr; memcpy(evt_data.cfm_req.dev_class, p_dev_rec->dev_class, DEV_CLASS_LEN); strlcpy((char*)evt_data.cfm_req.bd_name, (char*)p_dev_rec->sec_bd_name, BTM_MAX_REM_BD_NAME_LEN); switch (event) { case BTM_SP_CFM_REQ_EVT: /* Numeric confirmation. Need user to conf the passkey */ btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM); /* The device record must be allocated in the "IO cap exchange" step */ STREAM_TO_UINT32(evt_data.cfm_req.num_val, p); BTM_TRACE_DEBUG("BTM_SP_CFM_REQ_EVT: num_val: %u", evt_data.cfm_req.num_val); evt_data.cfm_req.just_works = true; /* process user confirm req in association with the auth_req param */ if (btm_cb.devcb.loc_io_caps == BTM_IO_CAP_IO) { if (p_dev_rec->rmt_io_caps == BTM_IO_CAP_UNKNOWN) { BTM_TRACE_ERROR( "%s did not receive IO cap response prior" " to BTM_SP_CFM_REQ_EVT, failing pairing request", __func__); status = BTM_WRONG_MODE; BTM_ConfirmReqReply(status, p_bda); return; } if ((p_dev_rec->rmt_io_caps == BTM_IO_CAP_IO) && (btm_cb.devcb.loc_io_caps == BTM_IO_CAP_IO) && ((p_dev_rec->rmt_auth_req & BTM_AUTH_SP_YES) || (btm_cb.devcb.loc_auth_req & BTM_AUTH_SP_YES))) { /* Both devices are DisplayYesNo and one or both devices want to authenticate -> use authenticated link key */ evt_data.cfm_req.just_works = false; } } BTM_TRACE_DEBUG( "btm_proc_sp_req_evt() just_works:%d, io loc:%d, rmt:%d, auth " "loc:%d, rmt:%d", evt_data.cfm_req.just_works, btm_cb.devcb.loc_io_caps, p_dev_rec->rmt_io_caps, btm_cb.devcb.loc_auth_req, p_dev_rec->rmt_auth_req); evt_data.cfm_req.loc_auth_req = btm_cb.devcb.loc_auth_req; evt_data.cfm_req.rmt_auth_req = p_dev_rec->rmt_auth_req; evt_data.cfm_req.loc_io_caps = btm_cb.devcb.loc_io_caps; evt_data.cfm_req.rmt_io_caps = p_dev_rec->rmt_io_caps; break; case BTM_SP_KEY_NOTIF_EVT: /* Passkey notification (other side is a keyboard) */ STREAM_TO_UINT32(evt_data.key_notif.passkey, p); BTM_TRACE_DEBUG("BTM_SP_KEY_NOTIF_EVT: passkey: %u", evt_data.key_notif.passkey); btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_AUTH_COMPLETE); break; case BTM_SP_KEY_REQ_EVT: if (btm_cb.devcb.loc_io_caps != BTM_IO_CAP_NONE) { /* HCI_USER_PASSKEY_REQUEST_EVT */ btm_sec_change_pairing_state(BTM_PAIR_STATE_KEY_ENTRY); } break; } if (btm_cb.api.p_sp_callback) { status = (*btm_cb.api.p_sp_callback)(event, &evt_data); if (status != BTM_NOT_AUTHORIZED) { return; } /* else BTM_NOT_AUTHORIZED means when the app wants to reject the req * right now */ } else if ((event == BTM_SP_CFM_REQ_EVT) && (evt_data.cfm_req.just_works)) { /* automatically reply with just works if no sp_cback */ status = BTM_SUCCESS; } if (event == BTM_SP_CFM_REQ_EVT) { BTM_TRACE_DEBUG("calling BTM_ConfirmReqReply with status: %d", status); BTM_ConfirmReqReply(status, p_bda); } else if (btm_cb.devcb.loc_io_caps != BTM_IO_CAP_NONE && event == BTM_SP_KEY_REQ_EVT) { BTM_PasskeyReqReply(status, p_bda, 0); } return; } /* Something bad. we can only fail this connection */ btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY; if (BTM_SP_CFM_REQ_EVT == event) { btsnd_hcic_user_conf_reply(p_bda, false); } else if (BTM_SP_KEY_NOTIF_EVT == event) { /* do nothing -> it very unlikely to happen. This event is most likely to be received by a HID host when it first connects to a HID device. Usually the Host initiated the connection in this case. On Mobile platforms, if there's a security process happening, the host probably can not initiate another connection. BTW (PC) is another story. */ p_dev_rec = btm_find_dev(p_bda); if (p_dev_rec != NULL) { btm_sec_disconnect(p_dev_rec->hci_handle, HCI_ERR_AUTH_FAILURE); } } else if (btm_cb.devcb.loc_io_caps != BTM_IO_CAP_NONE) { btsnd_hcic_user_passkey_neg_reply(p_bda); } } /******************************************************************************* * * Function btm_keypress_notif_evt * * Description This function is called when a key press notification is * received * * Returns void * ******************************************************************************/ void btm_keypress_notif_evt(uint8_t* p) { tBTM_SP_KEYPRESS evt_data; /* parse & report BTM_SP_KEYPRESS_EVT */ if (btm_cb.api.p_sp_callback) { RawAddress& p_bda = evt_data.bd_addr; STREAM_TO_BDADDR(p_bda, p); evt_data.notif_type = *p; (*btm_cb.api.p_sp_callback)(BTM_SP_KEYPRESS_EVT, (tBTM_SP_EVT_DATA*)&evt_data); } } /******************************************************************************* * * Function btm_simple_pair_complete * * Description This function is called when simple pairing process is * complete * * Returns void * ******************************************************************************/ void btm_simple_pair_complete(uint8_t* p) { tBTM_SP_COMPLT evt_data; tBTM_SEC_DEV_REC* p_dev_rec; uint8_t status; bool disc = false; status = *p++; STREAM_TO_BDADDR(evt_data.bd_addr, p); p_dev_rec = btm_find_dev(evt_data.bd_addr); if (p_dev_rec == NULL) { LOG(ERROR) << __func__ << " with unknown BDA: " << evt_data.bd_addr; return; } BTM_TRACE_EVENT( "btm_simple_pair_complete() Pair State: %s Status:%d sec_state: %u", btm_pair_state_descr(btm_cb.pairing_state), status, p_dev_rec->sec_state); evt_data.status = BTM_ERR_PROCESSING; if (status == HCI_SUCCESS) { evt_data.status = BTM_SUCCESS; p_dev_rec->sec_flags |= BTM_SEC_AUTHENTICATED; } else { if (status == HCI_ERR_PAIRING_NOT_ALLOWED) { /* The test spec wants the peer device to get this failure code. */ btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_DISCONNECT); /* Change the timer to 1 second */ alarm_set_on_mloop(btm_cb.pairing_timer, BT_1SEC_TIMEOUT_MS, btm_sec_pairing_timeout, NULL); } else if (btm_cb.pairing_bda == evt_data.bd_addr) { /* stop the timer */ alarm_cancel(btm_cb.pairing_timer); if (p_dev_rec->sec_state != BTM_SEC_STATE_AUTHENTICATING) { /* the initiating side: will receive auth complete event. disconnect ACL * at that time */ disc = true; } } else disc = true; } /* Let the pairing state stay active, p_auth_complete_callback will report the * failure */ evt_data.bd_addr = p_dev_rec->bd_addr; memcpy(evt_data.dev_class, p_dev_rec->dev_class, DEV_CLASS_LEN); if (btm_cb.api.p_sp_callback) (*btm_cb.api.p_sp_callback)(BTM_SP_COMPLT_EVT, (tBTM_SP_EVT_DATA*)&evt_data); if (disc) { /* simple pairing failed */ /* Avoid sending disconnect on HCI_ERR_PEER_USER */ if ((status != HCI_ERR_PEER_USER) && (status != HCI_ERR_CONN_CAUSE_LOCAL_HOST)) { btm_sec_send_hci_disconnect(p_dev_rec, HCI_ERR_AUTH_FAILURE, p_dev_rec->hci_handle); } } } /******************************************************************************* * * Function btm_rem_oob_req * * Description This function is called to process/report * HCI_REMOTE_OOB_DATA_REQUEST_EVT * * Returns void * ******************************************************************************/ void btm_rem_oob_req(uint8_t* p) { tBTM_SP_RMT_OOB evt_data; tBTM_SEC_DEV_REC* p_dev_rec; Octet16 c; Octet16 r; RawAddress& p_bda = evt_data.bd_addr; STREAM_TO_BDADDR(p_bda, p); VLOG(2) << __func__ << " BDA: " << p_bda; p_dev_rec = btm_find_dev(p_bda); if ((p_dev_rec != NULL) && btm_cb.api.p_sp_callback) { evt_data.bd_addr = p_dev_rec->bd_addr; memcpy(evt_data.dev_class, p_dev_rec->dev_class, DEV_CLASS_LEN); strlcpy((char*)evt_data.bd_name, (char*)p_dev_rec->sec_bd_name, BTM_MAX_REM_BD_NAME_LEN); btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP); if ((*btm_cb.api.p_sp_callback)(BTM_SP_RMT_OOB_EVT, (tBTM_SP_EVT_DATA*)&evt_data) == BTM_NOT_AUTHORIZED) { BTM_RemoteOobDataReply(true, p_bda, c, r); } return; } /* something bad. we can only fail this connection */ btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY; btsnd_hcic_rem_oob_neg_reply(p_bda); } /******************************************************************************* * * Function btm_read_local_oob_complete * * Description This function is called when read local oob data is * completed by the LM * * Returns void * ******************************************************************************/ void btm_read_local_oob_complete(uint8_t* p) { tBTM_SP_LOC_OOB evt_data; uint8_t status = *p++; BTM_TRACE_EVENT("btm_read_local_oob_complete:%d", status); if (status == HCI_SUCCESS) { evt_data.status = BTM_SUCCESS; STREAM_TO_ARRAY16(evt_data.c.data(), p); STREAM_TO_ARRAY16(evt_data.r.data(), p); } else evt_data.status = BTM_ERR_PROCESSING; if (btm_cb.api.p_sp_callback) { tBTM_SP_EVT_DATA btm_sp_evt_data; btm_sp_evt_data.loc_oob = evt_data; (*btm_cb.api.p_sp_callback)(BTM_SP_LOC_OOB_EVT, &btm_sp_evt_data); } } /******************************************************************************* * * Function btm_sec_auth_collision * * Description This function is called when authentication or encryption * needs to be retried at a later time. * * Returns void * ******************************************************************************/ static void btm_sec_auth_collision(uint16_t handle) { tBTM_SEC_DEV_REC* p_dev_rec; if (!btm_cb.collision_start_time) btm_cb.collision_start_time = bluetooth::common::time_get_os_boottime_ms(); if ((bluetooth::common::time_get_os_boottime_ms() - btm_cb.collision_start_time) < BTM_SEC_MAX_COLLISION_DELAY) { if (handle == BTM_SEC_INVALID_HANDLE) { p_dev_rec = btm_sec_find_dev_by_sec_state(BTM_SEC_STATE_AUTHENTICATING); if (p_dev_rec == NULL) p_dev_rec = btm_sec_find_dev_by_sec_state(BTM_SEC_STATE_ENCRYPTING); } else p_dev_rec = btm_find_dev_by_handle(handle); if (p_dev_rec != NULL) { BTM_TRACE_DEBUG( "btm_sec_auth_collision: state %d (retrying in a moment...)", p_dev_rec->sec_state); /* We will restart authentication after timeout */ if (p_dev_rec->sec_state == BTM_SEC_STATE_AUTHENTICATING || p_dev_rec->sec_state == BTM_SEC_STATE_ENCRYPTING) p_dev_rec->sec_state = 0; btm_cb.p_collided_dev_rec = p_dev_rec; alarm_set_on_mloop(btm_cb.sec_collision_timer, BT_1SEC_TIMEOUT_MS, btm_sec_collision_timeout, NULL); } } } /****************************************************************************** * * Function btm_sec_auth_retry * * Description This function is called when authentication or encryption * needs to be retried at a later time. * * Returns TRUE if a security retry required * *****************************************************************************/ static bool btm_sec_auth_retry(uint16_t handle, uint8_t status) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev_by_handle(handle); if (!p_dev_rec) return false; /* keep the old sm4 flag and clear the retry bit in control block */ uint8_t old_sm4 = p_dev_rec->sm4; p_dev_rec->sm4 &= ~BTM_SM4_RETRY; if ((btm_cb.pairing_state == BTM_PAIR_STATE_IDLE) && ((old_sm4 & BTM_SM4_RETRY) == 0) && (HCI_ERR_KEY_MISSING == status) && BTM_SEC_IS_SM4(p_dev_rec->sm4)) { /* This retry for missing key is for Lisbon or later only. Legacy device do not need this. the controller will drive the retry automatically set the retry bit */ btm_cb.collision_start_time = 0; btm_restore_mode(); p_dev_rec->sm4 |= BTM_SM4_RETRY; p_dev_rec->sec_flags &= ~BTM_SEC_LINK_KEY_KNOWN; BTM_TRACE_DEBUG("%s Retry for missing key sm4:x%x sec_flags:0x%x", __func__, p_dev_rec->sm4, p_dev_rec->sec_flags); /* With BRCM controller, we do not need to delete the stored link key in controller. If the stack may sit on top of other controller, we may need this BTM_DeleteStoredLinkKey (bd_addr, NULL); */ p_dev_rec->sec_state = BTM_SEC_STATE_IDLE; btm_sec_execute_procedure(p_dev_rec); return true; } return false; } /******************************************************************************* * * Function btm_sec_auth_complete * * Description This function is when authentication of the connection is * completed by the LM * * Returns void * ******************************************************************************/ void btm_sec_auth_complete(uint16_t handle, uint8_t status) { tBTM_PAIRING_STATE old_state = btm_cb.pairing_state; tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev_by_handle(handle); bool are_bonding = false; bool was_authenticating = false; if (p_dev_rec) { VLOG(2) << __func__ << ": Security Manager: in state: " << btm_pair_state_descr(btm_cb.pairing_state) << " handle:" << handle << " status:" << status << "dev->sec_state:" << p_dev_rec->sec_state << " bda:" << p_dev_rec->bd_addr << "RName:" << p_dev_rec->sec_bd_name; } else { VLOG(2) << __func__ << ": Security Manager: in state: " << btm_pair_state_descr(btm_cb.pairing_state) << " handle:" << handle << " status:" << status; } /* For transaction collision we need to wait and repeat. There is no need */ /* for random timeout because only slave should receive the result */ if ((status == HCI_ERR_LMP_ERR_TRANS_COLLISION) || (status == HCI_ERR_DIFF_TRANSACTION_COLLISION)) { btm_sec_auth_collision(handle); return; } else if (btm_sec_auth_retry(handle, status)) { return; } btm_cb.collision_start_time = 0; btm_restore_mode(); /* Check if connection was made just to do bonding. If we authenticate the connection that is up, this is the last event received. */ if (p_dev_rec && (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) && !(btm_cb.pairing_flags & BTM_PAIR_FLAGS_DISC_WHEN_DONE)) { p_dev_rec->security_required &= ~BTM_SEC_OUT_AUTHENTICATE; l2cu_start_post_bond_timer(p_dev_rec->hci_handle); } if (!p_dev_rec) return; if (p_dev_rec->sec_state == BTM_SEC_STATE_AUTHENTICATING) { p_dev_rec->sec_state = BTM_SEC_STATE_IDLE; was_authenticating = true; /* There can be a race condition, when we are starting authentication * and the peer device is doing encryption. * If first we receive encryption change up, then initiated * authentication can not be performed. * According to the spec we can not do authentication on the * encrypted link, so device is correct. */ if ((status == HCI_ERR_COMMAND_DISALLOWED) && ((p_dev_rec->sec_flags & (BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED)) == (BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED))) { status = HCI_SUCCESS; } if (status == HCI_SUCCESS) { p_dev_rec->sec_flags |= BTM_SEC_AUTHENTICATED; } } if ((btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) && (p_dev_rec->bd_addr == btm_cb.pairing_bda)) { if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) { are_bonding = true; } btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); } if (was_authenticating == false) { if ((btm_cb.api.p_auth_complete_callback && status != HCI_SUCCESS) && (old_state != BTM_PAIR_STATE_IDLE)) { (*btm_cb.api.p_auth_complete_callback)(p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, status); } return; } /* Currently we do not notify user if it is a keyboard which connects */ /* User probably Disabled the keyboard while it was asleap. Let them try */ if (btm_cb.api.p_auth_complete_callback) { /* report the suthentication status */ if ((old_state != BTM_PAIR_STATE_IDLE) || (status != HCI_SUCCESS)) (*btm_cb.api.p_auth_complete_callback)(p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, status); } /* If this is a bonding procedure can disconnect the link now */ if (are_bonding) { p_dev_rec->security_required &= ~BTM_SEC_OUT_AUTHENTICATE; if (status != HCI_SUCCESS) { if (((status != HCI_ERR_PEER_USER) && (status != HCI_ERR_CONN_CAUSE_LOCAL_HOST))) btm_sec_send_hci_disconnect(p_dev_rec, HCI_ERR_PEER_USER, p_dev_rec->hci_handle); } else { BTM_TRACE_DEBUG("TRYING TO DECIDE IF CAN USE SMP_BR_CHNL"); if (p_dev_rec->new_encryption_key_is_p256 && (btm_sec_use_smp_br_chnl(p_dev_rec)) /* no LE keys are available, do deriving */ && (!(p_dev_rec->sec_flags & BTM_SEC_LE_LINK_KEY_KNOWN) || /* or BR key is higher security than existing LE keys */ (!(p_dev_rec->sec_flags & BTM_SEC_LE_LINK_KEY_AUTHED) && (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_AUTHED)))) { BTM_TRACE_DEBUG( "link encrypted afer dedic bonding can use SMP_BR_CHNL"); if (btm_sec_is_master(p_dev_rec)) { // Encryption is required to start SM over BR/EDR // indicate that this is encryption after authentication BTM_SetEncryption(p_dev_rec->bd_addr, BT_TRANSPORT_BR_EDR, NULL, NULL, 0); } } l2cu_start_post_bond_timer(p_dev_rec->hci_handle); } return; } /* If authentication failed, notify the waiting layer */ if (status != HCI_SUCCESS) { btm_sec_dev_rec_cback_event(p_dev_rec, BTM_ERR_PROCESSING, false); if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_DISC_WHEN_DONE) { btm_sec_send_hci_disconnect(p_dev_rec, HCI_ERR_AUTH_FAILURE, p_dev_rec->hci_handle); } return; } if (p_dev_rec->pin_code_length >= 16 || p_dev_rec->link_key_type == BTM_LKEY_TYPE_AUTH_COMB || p_dev_rec->link_key_type == BTM_LKEY_TYPE_AUTH_COMB_P_256) { // If we have MITM protection we have a higher level of security than // provided by 16 digits PIN p_dev_rec->sec_flags |= BTM_SEC_16_DIGIT_PIN_AUTHED; } /* Authentication succeeded, execute the next security procedure, if any */ status = btm_sec_execute_procedure(p_dev_rec); /* If there is no next procedure, or procedure failed to start, notify the * caller */ if (status != BTM_CMD_STARTED) btm_sec_dev_rec_cback_event(p_dev_rec, status, false); } /******************************************************************************* * * Function btm_sec_encrypt_change * * Description This function is when encryption of the connection is * completed by the LM * * Returns void * ******************************************************************************/ void btm_sec_encrypt_change(uint16_t handle, uint8_t status, uint8_t encr_enable) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev_by_handle(handle); tACL_CONN* p_acl = NULL; uint8_t acl_idx = btm_handle_to_acl_index(handle); BTM_TRACE_EVENT( "Security Manager: encrypt_change status:%d State:%d, encr_enable = %d", status, (p_dev_rec) ? p_dev_rec->sec_state : 0, encr_enable); BTM_TRACE_DEBUG("before update p_dev_rec->sec_flags=0x%x", (p_dev_rec) ? p_dev_rec->sec_flags : 0); /* For transaction collision we need to wait and repeat. There is no need */ /* for random timeout because only slave should receive the result */ if ((status == HCI_ERR_LMP_ERR_TRANS_COLLISION) || (status == HCI_ERR_DIFF_TRANSACTION_COLLISION)) { btm_sec_auth_collision(handle); return; } btm_cb.collision_start_time = 0; if (!p_dev_rec) return; if ((status == HCI_SUCCESS) && encr_enable) { if (p_dev_rec->hci_handle == handle) { p_dev_rec->sec_flags |= (BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED); if (p_dev_rec->pin_code_length >= 16 || p_dev_rec->link_key_type == BTM_LKEY_TYPE_AUTH_COMB || p_dev_rec->link_key_type == BTM_LKEY_TYPE_AUTH_COMB_P_256) { p_dev_rec->sec_flags |= BTM_SEC_16_DIGIT_PIN_AUTHED; } } else { p_dev_rec->sec_flags |= (BTM_SEC_LE_AUTHENTICATED | BTM_SEC_LE_ENCRYPTED); } } /* It is possible that we decrypted the link to perform role switch */ /* mark link not to be encrypted, so that when we execute security next time * it will kick in again */ if ((status == HCI_SUCCESS) && !encr_enable) { if (p_dev_rec->hci_handle == handle) p_dev_rec->sec_flags &= ~BTM_SEC_ENCRYPTED; else p_dev_rec->sec_flags &= ~BTM_SEC_LE_ENCRYPTED; } BTM_TRACE_DEBUG("after update p_dev_rec->sec_flags=0x%x", p_dev_rec->sec_flags); if (acl_idx != MAX_L2CAP_LINKS) p_acl = &btm_cb.acl_db[acl_idx]; if (p_acl != NULL) btm_sec_check_pending_enc_req(p_dev_rec, p_acl->transport, encr_enable); if (p_acl && p_acl->transport == BT_TRANSPORT_LE) { if (status == HCI_ERR_KEY_MISSING || status == HCI_ERR_AUTH_FAILURE || status == HCI_ERR_ENCRY_MODE_NOT_ACCEPTABLE) { p_dev_rec->sec_flags &= ~(BTM_SEC_LE_LINK_KEY_KNOWN); p_dev_rec->ble.key_type = BTM_LE_KEY_NONE; } btm_ble_link_encrypted(p_dev_rec->ble.pseudo_addr, encr_enable); return; } else { /* BR/EDR connection, update the encryption key size to be 16 as always */ p_dev_rec->enc_key_size = 16; } BTM_TRACE_DEBUG("in %s new_encr_key_256 is %d", __func__, p_dev_rec->new_encryption_key_is_p256); if ((status == HCI_SUCCESS) && encr_enable && (p_dev_rec->hci_handle == handle)) { /* if BR key is temporary no need for LE LTK derivation */ bool derive_ltk = true; if (p_dev_rec->rmt_auth_req == BTM_AUTH_SP_NO && btm_cb.devcb.loc_auth_req == BTM_AUTH_SP_NO) { derive_ltk = false; BTM_TRACE_DEBUG("%s: BR key is temporary, skip derivation of LE LTK", __func__); } if (p_dev_rec->new_encryption_key_is_p256) { if (btm_sec_use_smp_br_chnl(p_dev_rec) && btm_sec_is_master(p_dev_rec) && /* if LE key is not known, do deriving */ (!(p_dev_rec->sec_flags & BTM_SEC_LE_LINK_KEY_KNOWN) || /* or BR key is higher security than existing LE keys */ (!(p_dev_rec->sec_flags & BTM_SEC_LE_LINK_KEY_AUTHED) && (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_AUTHED))) && derive_ltk) { /* BR/EDR is encrypted with LK that can be used to derive LE LTK */ p_dev_rec->new_encryption_key_is_p256 = false; if (p_dev_rec->no_smp_on_br) { BTM_TRACE_DEBUG("%s NO SM over BR/EDR", __func__); } else { BTM_TRACE_DEBUG("%s start SM over BR/EDR", __func__); SMP_BR_PairWith(p_dev_rec->bd_addr); } } } else { // BR/EDR is successfully encrypted. Correct LK type if needed // (BR/EDR LK derived from LE LTK was used for encryption) if ((encr_enable == 1) && /* encryption is ON for SSP */ /* LK type is for BR/EDR SC */ (p_dev_rec->link_key_type == BTM_LKEY_TYPE_UNAUTH_COMB_P_256 || p_dev_rec->link_key_type == BTM_LKEY_TYPE_AUTH_COMB_P_256)) { if (p_dev_rec->link_key_type == BTM_LKEY_TYPE_UNAUTH_COMB_P_256) p_dev_rec->link_key_type = BTM_LKEY_TYPE_UNAUTH_COMB; else /* BTM_LKEY_TYPE_AUTH_COMB_P_256 */ p_dev_rec->link_key_type = BTM_LKEY_TYPE_AUTH_COMB; BTM_TRACE_DEBUG("updated link key type to %d", p_dev_rec->link_key_type); btm_send_link_key_notif(p_dev_rec); } } } /* If this encryption was started by peer do not need to do anything */ if (p_dev_rec->sec_state != BTM_SEC_STATE_ENCRYPTING) { if (BTM_SEC_STATE_DELAY_FOR_ENC == p_dev_rec->sec_state) { p_dev_rec->sec_state = BTM_SEC_STATE_IDLE; BTM_TRACE_DEBUG("%s: clearing callback. p_dev_rec=%p, p_callback=%p", __func__, p_dev_rec, p_dev_rec->p_callback); p_dev_rec->p_callback = NULL; l2cu_resubmit_pending_sec_req(&p_dev_rec->bd_addr); } return; } p_dev_rec->sec_state = BTM_SEC_STATE_IDLE; /* If encryption setup failed, notify the waiting layer */ if (status != HCI_SUCCESS) { btm_sec_dev_rec_cback_event(p_dev_rec, BTM_ERR_PROCESSING, false); return; } /* Encryption setup succeeded, execute the next security procedure, if any */ status = (uint8_t)btm_sec_execute_procedure(p_dev_rec); /* If there is no next procedure, or procedure failed to start, notify the * caller */ if (status != BTM_CMD_STARTED) btm_sec_dev_rec_cback_event(p_dev_rec, status, false); } /******************************************************************************* * * Function btm_sec_connect_after_reject_timeout * * Description Connection for bonding could not start because of the * collision. Initiate outgoing connection * * Returns Pointer to the TLE struct * ******************************************************************************/ static void btm_sec_connect_after_reject_timeout(UNUSED_ATTR void* data) { tBTM_SEC_DEV_REC* p_dev_rec = btm_cb.p_collided_dev_rec; BTM_TRACE_EVENT("%s", __func__); btm_cb.p_collided_dev_rec = 0; if (btm_sec_dd_create_conn(p_dev_rec) != BTM_CMD_STARTED) { BTM_TRACE_WARNING("Security Manager: %s: failed to start connection", __func__); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); if (btm_cb.api.p_auth_complete_callback) (*btm_cb.api.p_auth_complete_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, HCI_ERR_MEMORY_FULL); } } /******************************************************************************* * * Function btm_sec_connected * * Description This function is when a connection to the peer device is * established * * Returns void * ******************************************************************************/ void btm_sec_connected(const RawAddress& bda, uint16_t handle, uint8_t status, uint8_t enc_mode) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev(bda); uint8_t res; bool is_pairing_device = false; bool addr_matched; tACL_CONN* p_acl_cb; uint8_t bit_shift = 0; btm_acl_resubmit_page(); if (p_dev_rec) { VLOG(2) << __func__ << ": Security Manager: in state: " << btm_pair_state_descr(btm_cb.pairing_state) << " handle:" << handle << " status:" << loghex(status) << " enc_mode:" << loghex(enc_mode) << " bda:" << bda << " RName:" << p_dev_rec->sec_bd_name; } else { VLOG(2) << __func__ << ": Security Manager: in state: " << btm_pair_state_descr(btm_cb.pairing_state) << " handle:" << handle << " status:" << loghex(status) << " enc_mode:" << loghex(enc_mode) << " bda:" << bda; } if (!p_dev_rec) { /* There is no device record for new connection. Allocate one */ if (status == HCI_SUCCESS) { p_dev_rec = btm_sec_alloc_dev(bda); } else { /* If the device matches with stored paring address * reset the paring state to idle */ if ((btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) && btm_cb.pairing_bda == bda) { btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); } /* can not find the device record and the status is error, * just ignore it */ return; } } else /* Update the timestamp for this device */ { bit_shift = (handle == p_dev_rec->ble_hci_handle) ? 8 : 0; p_dev_rec->timestamp = btm_cb.dev_rec_count++; if (p_dev_rec->sm4 & BTM_SM4_CONN_PEND) { /* tell L2CAP it's a bonding connection. */ if ((btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) && (btm_cb.pairing_bda == p_dev_rec->bd_addr) && (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)) { /* if incoming connection failed while pairing, then try to connect and * continue */ /* Motorola S9 disconnects without asking pin code */ if ((status != HCI_SUCCESS) && (btm_cb.pairing_state == BTM_PAIR_STATE_WAIT_PIN_REQ)) { BTM_TRACE_WARNING( "Security Manager: btm_sec_connected: incoming connection failed " "without asking PIN"); p_dev_rec->sm4 &= ~BTM_SM4_CONN_PEND; if (p_dev_rec->sec_flags & BTM_SEC_NAME_KNOWN) { /* Start timer with 0 to initiate connection with new LCB */ /* because L2CAP will delete current LCB with this event */ btm_cb.p_collided_dev_rec = p_dev_rec; alarm_set_on_mloop(btm_cb.sec_collision_timer, 0, btm_sec_connect_after_reject_timeout, NULL); } else { btm_sec_change_pairing_state(BTM_PAIR_STATE_GET_REM_NAME); if (BTM_ReadRemoteDeviceName(p_dev_rec->bd_addr, NULL, BT_TRANSPORT_BR_EDR) != BTM_CMD_STARTED) { BTM_TRACE_ERROR("%s cannot read remote name", __func__); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); } } #if (BTM_DISC_DURING_RS == TRUE) p_dev_rec->rs_disc_pending = BTM_SEC_RS_NOT_PENDING; /* reset flag */ #endif return; } else { l2cu_update_lcb_4_bonding(p_dev_rec->bd_addr, true); } } /* always clear the pending flag */ p_dev_rec->sm4 &= ~BTM_SM4_CONN_PEND; } } p_dev_rec->device_type |= BT_DEVICE_TYPE_BREDR; #if (BTM_DISC_DURING_RS == TRUE) p_dev_rec->rs_disc_pending = BTM_SEC_RS_NOT_PENDING; /* reset flag */ #endif p_dev_rec->rs_disc_pending = BTM_SEC_RS_NOT_PENDING; /* reset flag */ addr_matched = (btm_cb.pairing_bda == bda); if ((btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) && addr_matched) { /* if we rejected incoming connection from bonding device */ if ((status == HCI_ERR_HOST_REJECT_DEVICE) && (btm_cb.pairing_flags & BTM_PAIR_FLAGS_REJECTED_CONNECT)) { BTM_TRACE_WARNING( "Security Manager: btm_sec_connected: HCI_Conn_Comp Flags:0x%04x, " "sm4: 0x%x", btm_cb.pairing_flags, p_dev_rec->sm4); btm_cb.pairing_flags &= ~BTM_PAIR_FLAGS_REJECTED_CONNECT; if (BTM_SEC_IS_SM4_UNKNOWN(p_dev_rec->sm4)) { /* Try again: RNR when no ACL causes HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT */ btm_sec_change_pairing_state(BTM_PAIR_STATE_GET_REM_NAME); if (BTM_ReadRemoteDeviceName(bda, NULL, BT_TRANSPORT_BR_EDR) != BTM_CMD_STARTED) { BTM_TRACE_ERROR("%s cannot read remote name", __func__); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); } return; } /* if we already have pin code */ if (btm_cb.pairing_state != BTM_PAIR_STATE_WAIT_LOCAL_PIN) { /* Start timer with 0 to initiate connection with new LCB */ /* because L2CAP will delete current LCB with this event */ btm_cb.p_collided_dev_rec = p_dev_rec; alarm_set_on_mloop(btm_cb.sec_collision_timer, 0, btm_sec_connect_after_reject_timeout, NULL); } return; } /* wait for incoming connection without resetting pairing state */ else if (status == HCI_ERR_CONNECTION_EXISTS) { BTM_TRACE_WARNING( "Security Manager: btm_sec_connected: Wait for incoming connection"); return; } is_pairing_device = true; } /* If connection was made to do bonding restore link security if changed */ btm_restore_mode(); /* if connection fails during pin request, notify application */ if (status != HCI_SUCCESS) { /* If connection failed because of during pairing, need to tell user */ if (is_pairing_device) { p_dev_rec->security_required &= ~BTM_SEC_OUT_AUTHENTICATE; p_dev_rec->sec_flags &= ~((BTM_SEC_LINK_KEY_KNOWN | BTM_SEC_LINK_KEY_AUTHED) << bit_shift); BTM_TRACE_DEBUG("security_required:%x ", p_dev_rec->security_required); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); /* We need to notify host that the key is not known any more */ if (btm_cb.api.p_auth_complete_callback) { (*btm_cb.api.p_auth_complete_callback)(p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, status); } } /* Do not send authentication failure, if following conditions hold good 1. BTM Sec Pairing state is idle 2. Link key for the remote device is present. 3. Remote is SSP capable. */ else if ((p_dev_rec->link_key_type <= BTM_LKEY_TYPE_REMOTE_UNIT) && (((status == HCI_ERR_AUTH_FAILURE) || (status == HCI_ERR_KEY_MISSING) || (status == HCI_ERR_HOST_REJECT_SECURITY) || (status == HCI_ERR_PAIRING_NOT_ALLOWED) || (status == HCI_ERR_UNIT_KEY_USED) || (status == HCI_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED) || (status == HCI_ERR_ENCRY_MODE_NOT_ACCEPTABLE) || (status == HCI_ERR_REPEATED_ATTEMPTS)))) { p_dev_rec->security_required &= ~BTM_SEC_OUT_AUTHENTICATE; p_dev_rec->sec_flags &= ~(BTM_SEC_LE_LINK_KEY_KNOWN << bit_shift); #ifdef BRCM_NOT_4_BTE /* If we rejected pairing, pass this special result code */ if (btm_cb.acl_disc_reason == HCI_ERR_HOST_REJECT_SECURITY) { status = HCI_ERR_HOST_REJECT_SECURITY; } #endif /* We need to notify host that the key is not known any more */ if (btm_cb.api.p_auth_complete_callback) { (*btm_cb.api.p_auth_complete_callback)(p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, status); } } /* p_auth_complete_callback might have freed the p_dev_rec, ensure it exists * before accessing */ p_dev_rec = btm_find_dev(bda); if (!p_dev_rec) { /* Don't callback when device security record was removed */ VLOG(1) << __func__ << ": device security record associated with this bda has been " "removed! bda=" << bda << ", do not callback!"; return; } if (status == HCI_ERR_CONNECTION_TOUT || status == HCI_ERR_LMP_RESPONSE_TIMEOUT || status == HCI_ERR_UNSPECIFIED || status == HCI_ERR_PAGE_TIMEOUT) btm_sec_dev_rec_cback_event(p_dev_rec, BTM_DEVICE_TIMEOUT, false); else btm_sec_dev_rec_cback_event(p_dev_rec, BTM_ERR_PROCESSING, false); return; } /* If initiated dedicated bonding, return the link key now, and initiate * disconnect */ /* If dedicated bonding, and we now have a link key, we are all done */ if (is_pairing_device && (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN)) { if (p_dev_rec->link_key_not_sent) { p_dev_rec->link_key_not_sent = false; btm_send_link_key_notif(p_dev_rec); } p_dev_rec->security_required &= ~BTM_SEC_OUT_AUTHENTICATE; /* remember flag before it is initialized */ if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) res = true; else res = false; if (btm_cb.api.p_auth_complete_callback) (*btm_cb.api.p_auth_complete_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, HCI_SUCCESS); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); if (res) { /* Let l2cap start bond timer */ l2cu_update_lcb_4_bonding(p_dev_rec->bd_addr, true); } return; } p_dev_rec->hci_handle = handle; /* role may not be correct here, it will be updated by l2cap, but we need to */ /* notify btm_acl that link is up, so starting of rmt name request will not */ /* set paging flag up */ p_acl_cb = btm_bda_to_acl(bda, BT_TRANSPORT_BR_EDR); if (p_acl_cb) { /* whatever is in btm_establish_continue() without reporting the BTM_BL_CONN_EVT * event */ #if (BTM_BYPASS_EXTRA_ACL_SETUP == FALSE) /* For now there are a some devices that do not like sending */ /* commands events and data at the same time. */ /* Set the packet types to the default allowed by the device */ btm_set_packet_types(p_acl_cb, btm_cb.btm_acl_pkt_types_supported); if (btm_cb.btm_def_link_policy) BTM_SetLinkPolicy(p_acl_cb->remote_addr, &btm_cb.btm_def_link_policy); #endif } btm_acl_created(bda, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, handle, HCI_ROLE_SLAVE, BT_TRANSPORT_BR_EDR); /* Initialize security flags. We need to do that because some */ /* authorization complete could have come after the connection is dropped */ /* and that would set wrong flag that link has been authorized already */ p_dev_rec->sec_flags &= ~((BTM_SEC_AUTHORIZED | BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED | BTM_SEC_ROLE_SWITCHED) << bit_shift); if (enc_mode != HCI_ENCRYPT_MODE_DISABLED) p_dev_rec->sec_flags |= ((BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED) << bit_shift); if (btm_cb.security_mode == BTM_SEC_MODE_LINK) p_dev_rec->sec_flags |= (BTM_SEC_AUTHENTICATED << bit_shift); if (p_dev_rec->pin_code_length >= 16 || p_dev_rec->link_key_type == BTM_LKEY_TYPE_AUTH_COMB || p_dev_rec->link_key_type == BTM_LKEY_TYPE_AUTH_COMB_P_256) { p_dev_rec->sec_flags |= (BTM_SEC_16_DIGIT_PIN_AUTHED << bit_shift); } p_dev_rec->link_key_changed = false; /* After connection is established we perform security if we do not know */ /* the name, or if we are originator because some procedure can have */ /* been scheduled while connection was down */ BTM_TRACE_DEBUG("is_originator:%d ", p_dev_rec->is_originator); if (!(p_dev_rec->sec_flags & BTM_SEC_NAME_KNOWN) || p_dev_rec->is_originator) { res = btm_sec_execute_procedure(p_dev_rec); if (res != BTM_CMD_STARTED) btm_sec_dev_rec_cback_event(p_dev_rec, res, false); } return; } /******************************************************************************* * * Function btm_sec_disconnect * * Description This function is called to disconnect HCI link * * Returns btm status * ******************************************************************************/ tBTM_STATUS btm_sec_disconnect(uint16_t handle, uint8_t reason) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev_by_handle(handle); /* In some weird race condition we may not have a record */ if (!p_dev_rec) { btsnd_hcic_disconnect(handle, reason); return (BTM_SUCCESS); } /* If we are in the process of bonding we need to tell client that auth failed */ if ((btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) && (btm_cb.pairing_bda == p_dev_rec->bd_addr) && (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)) { /* we are currently doing bonding. Link will be disconnected when done */ btm_cb.pairing_flags |= BTM_PAIR_FLAGS_DISC_WHEN_DONE; return (BTM_BUSY); } return (btm_sec_send_hci_disconnect(p_dev_rec, reason, handle)); } /******************************************************************************* * * Function btm_sec_disconnected * * Description This function is when a connection to the peer device is * dropped * * Returns void * ******************************************************************************/ void btm_sec_disconnected(uint16_t handle, uint8_t reason) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev_by_handle(handle); uint8_t old_pairing_flags = btm_cb.pairing_flags; int result = HCI_ERR_AUTH_FAILURE; tBTM_SEC_CALLBACK* p_callback = NULL; tBT_TRANSPORT transport = BT_TRANSPORT_BR_EDR; /* If page was delayed for disc complete, can do it now */ btm_cb.discing = false; btm_acl_resubmit_page(); if (!p_dev_rec) return; transport = (handle == p_dev_rec->hci_handle) ? BT_TRANSPORT_BR_EDR : BT_TRANSPORT_LE; p_dev_rec->rs_disc_pending = BTM_SEC_RS_NOT_PENDING; /* reset flag */ #if (BTM_DISC_DURING_RS == TRUE) LOG_INFO("%s clearing pending flag handle:%d reason:%d", __func__, handle, reason); p_dev_rec->rs_disc_pending = BTM_SEC_RS_NOT_PENDING; /* reset flag */ #endif /* clear unused flags */ p_dev_rec->sm4 &= BTM_SM4_TRUE; VLOG(2) << __func__ << " bd_addr: " << p_dev_rec->bd_addr << " name: " << p_dev_rec->sec_bd_name << " state: " << btm_pair_state_descr(btm_cb.pairing_state) << " reason: " << reason << " sec_req: " << std::hex << p_dev_rec->security_required; BTM_TRACE_EVENT("%s before update sec_flags=0x%x", __func__, p_dev_rec->sec_flags); /* If we are in the process of bonding we need to tell client that auth failed */ if ((btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) && (btm_cb.pairing_bda == p_dev_rec->bd_addr)) { btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); p_dev_rec->sec_flags &= ~BTM_SEC_LINK_KEY_KNOWN; if (btm_cb.api.p_auth_complete_callback) { /* If the disconnection reason is REPEATED_ATTEMPTS, send this error message to complete callback function to display the error message of Repeated attempts. All others, send HCI_ERR_AUTH_FAILURE. */ if (reason == HCI_ERR_REPEATED_ATTEMPTS) { result = HCI_ERR_REPEATED_ATTEMPTS; } else if (old_pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) { result = HCI_ERR_HOST_REJECT_SECURITY; } (*btm_cb.api.p_auth_complete_callback)(p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, result); // |btm_cb.api.p_auth_complete_callback| may cause |p_dev_rec| to be // deallocated. p_dev_rec = btm_find_dev_by_handle(handle); if (!p_dev_rec) { return; } } } btm_ble_update_mode_operation(HCI_ROLE_UNKNOWN, &p_dev_rec->bd_addr, HCI_SUCCESS); /* see sec_flags processing in btm_acl_removed */ if (transport == BT_TRANSPORT_LE) { p_dev_rec->ble_hci_handle = BTM_SEC_INVALID_HANDLE; p_dev_rec->sec_flags &= ~(BTM_SEC_LE_AUTHENTICATED | BTM_SEC_LE_ENCRYPTED); p_dev_rec->enc_key_size = 0; // This is for chips that don't support being in connected and advertising // state at same time. if (!p_dev_rec->is_originator) { btm_ble_advertiser_notify_terminated_legacy(HCI_SUCCESS, handle); } } else { p_dev_rec->hci_handle = BTM_SEC_INVALID_HANDLE; p_dev_rec->sec_flags &= ~(BTM_SEC_AUTHORIZED | BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED | BTM_SEC_ROLE_SWITCHED | BTM_SEC_16_DIGIT_PIN_AUTHED); // Remove temporary key. if (p_dev_rec->bond_type == BOND_TYPE_TEMPORARY) p_dev_rec->sec_flags &= ~(BTM_SEC_LINK_KEY_KNOWN); } /* Some devices hardcode sample LTK value from spec, instead of generating * one. Treat such devices as insecure, and remove such bonds on * disconnection. */ if (is_sample_ltk(p_dev_rec->ble.keys.pltk)) { android_errorWriteLog(0x534e4554, "128437297"); LOG(INFO) << __func__ << " removing bond to device that used sample LTK: " << p_dev_rec->bd_addr; bta_dm_remove_device(p_dev_rec->bd_addr); } BTM_TRACE_EVENT("%s after update sec_flags=0x%x", __func__, p_dev_rec->sec_flags); if (p_dev_rec->sec_state == BTM_SEC_STATE_DISCONNECTING_BOTH) { p_dev_rec->sec_state = (transport == BT_TRANSPORT_LE) ? BTM_SEC_STATE_DISCONNECTING : BTM_SEC_STATE_DISCONNECTING_BLE; return; } p_dev_rec->sec_state = BTM_SEC_STATE_IDLE; p_dev_rec->security_required = BTM_SEC_NONE; p_callback = p_dev_rec->p_callback; /* if security is pending, send callback to clean up the security state */ if (p_callback) { BTM_TRACE_DEBUG("%s: clearing callback. p_dev_rec=%p, p_callback=%p", __func__, p_dev_rec, p_dev_rec->p_callback); p_dev_rec->p_callback = NULL; /* when the peer device time out the authentication before we do, this call back must be reset here */ (*p_callback)(&p_dev_rec->bd_addr, transport, p_dev_rec->p_ref_data, BTM_ERR_PROCESSING); } } /** This function is called when a new connection link key is generated */ void btm_sec_link_key_notification(const RawAddress& p_bda, const Octet16& link_key, uint8_t key_type) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_or_alloc_dev(p_bda); bool we_are_bonding = false; bool ltk_derived_lk = false; VLOG(2) << __func__ << " BDA: " << p_bda << ", TYPE: " << +key_type; if ((key_type >= BTM_LTK_DERIVED_LKEY_OFFSET + BTM_LKEY_TYPE_COMBINATION) && (key_type <= BTM_LTK_DERIVED_LKEY_OFFSET + BTM_LKEY_TYPE_AUTH_COMB_P_256)) { ltk_derived_lk = true; key_type -= BTM_LTK_DERIVED_LKEY_OFFSET; } /* If connection was made to do bonding restore link security if changed */ btm_restore_mode(); if (key_type != BTM_LKEY_TYPE_CHANGED_COMB) p_dev_rec->link_key_type = key_type; p_dev_rec->sec_flags |= BTM_SEC_LINK_KEY_KNOWN; /* * Until this point in time, we do not know if MITM was enabled, hence we * add the extended security flag here. */ if (p_dev_rec->pin_code_length >= 16 || p_dev_rec->link_key_type == BTM_LKEY_TYPE_AUTH_COMB || p_dev_rec->link_key_type == BTM_LKEY_TYPE_AUTH_COMB_P_256) { p_dev_rec->sec_flags |= BTM_SEC_16_DIGIT_PIN_AUTHED; } /* BR/EDR connection, update the encryption key size to be 16 as always */ p_dev_rec->enc_key_size = 16; p_dev_rec->link_key = link_key; if ((btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) && (btm_cb.pairing_bda == p_bda)) { if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) we_are_bonding = true; else btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); } /* save LTK derived LK no matter what */ if (ltk_derived_lk) { if (btm_cb.api.p_link_key_callback) { BTM_TRACE_DEBUG("%s() Save LTK derived LK (key_type = %d)", __func__, p_dev_rec->link_key_type); (*btm_cb.api.p_link_key_callback)(p_bda, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, link_key, p_dev_rec->link_key_type); } } else { if ((p_dev_rec->link_key_type == BTM_LKEY_TYPE_UNAUTH_COMB_P_256) || (p_dev_rec->link_key_type == BTM_LKEY_TYPE_AUTH_COMB_P_256)) { p_dev_rec->new_encryption_key_is_p256 = true; BTM_TRACE_DEBUG("%s set new_encr_key_256 to %d", __func__, p_dev_rec->new_encryption_key_is_p256); } } /* If name is not known at this point delay calling callback until the name is */ /* resolved. Unless it is a HID Device and we really need to send all link * keys. */ if ((!(p_dev_rec->sec_flags & BTM_SEC_NAME_KNOWN) && ((p_dev_rec->dev_class[1] & BTM_COD_MAJOR_CLASS_MASK) != BTM_COD_MAJOR_PERIPHERAL)) && !ltk_derived_lk) { VLOG(2) << __func__ << " Delayed BDA: " << p_bda << " Type:" << +key_type; p_dev_rec->link_key_not_sent = true; /* If it is for bonding nothing else will follow, so we need to start name * resolution */ if (we_are_bonding) { SendRemoteNameRequest(p_bda); } BTM_TRACE_EVENT("rmt_io_caps:%d, sec_flags:x%x, dev_class[1]:x%02x", p_dev_rec->rmt_io_caps, p_dev_rec->sec_flags, p_dev_rec->dev_class[1]) return; } /* If its not us who perform authentication, we should tell stackserver */ /* that some authentication has been completed */ /* This is required when different entities receive link notification and auth * complete */ if (!(p_dev_rec->security_required & BTM_SEC_OUT_AUTHENTICATE) /* for derived key, always send authentication callback for BR channel */ || ltk_derived_lk) { if (btm_cb.api.p_auth_complete_callback) (*btm_cb.api.p_auth_complete_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, HCI_SUCCESS); } /* We will save link key only if the user authorized it - BTE report link key in * all cases */ #ifdef BRCM_NONE_BTE if (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_AUTHED) #endif { if (btm_cb.api.p_link_key_callback) { if (ltk_derived_lk) { BTM_TRACE_DEBUG( "btm_sec_link_key_notification() LTK derived LK is saved already" " (key_type = %d)", p_dev_rec->link_key_type); } else { (*btm_cb.api.p_link_key_callback)(p_bda, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, link_key, p_dev_rec->link_key_type); } } } } /******************************************************************************* * * Function btm_sec_link_key_request * * Description This function is called when controller requests link key * * Returns Pointer to the record or NULL * ******************************************************************************/ void btm_sec_link_key_request(const RawAddress& bda) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_or_alloc_dev(bda); VLOG(2) << __func__ << " bda: " << bda; if ((btm_cb.pairing_state == BTM_PAIR_STATE_WAIT_PIN_REQ) && (btm_cb.collision_start_time != 0) && (btm_cb.p_collided_dev_rec->bd_addr == bda)) { BTM_TRACE_EVENT( "btm_sec_link_key_request() rejecting link key req " "State: %d START_TIMEOUT : %d", btm_cb.pairing_state, btm_cb.collision_start_time); btsnd_hcic_link_key_neg_reply(bda); return; } if (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN) { btsnd_hcic_link_key_req_reply(bda, p_dev_rec->link_key); return; } /* Notify L2CAP to increase timeout */ l2c_pin_code_request(bda); /* The link key is not in the database and it is not known to the manager */ btsnd_hcic_link_key_neg_reply(bda); } /******************************************************************************* * * Function btm_sec_pairing_timeout * * Description This function is called when host does not provide PIN * within requested time * * Returns Pointer to the TLE struct * ******************************************************************************/ static void btm_sec_pairing_timeout(UNUSED_ATTR void* data) { tBTM_CB* p_cb = &btm_cb; tBTM_SEC_DEV_REC* p_dev_rec; tBTM_AUTH_REQ auth_req = (btm_cb.devcb.loc_io_caps == BTM_IO_CAP_NONE) ? BTM_AUTH_AP_NO : BTM_AUTH_AP_YES; uint8_t name[2]; p_dev_rec = btm_find_dev(p_cb->pairing_bda); BTM_TRACE_EVENT("%s State: %s Flags: %u", __func__, btm_pair_state_descr(p_cb->pairing_state), p_cb->pairing_flags); switch (p_cb->pairing_state) { case BTM_PAIR_STATE_WAIT_PIN_REQ: btm_sec_bond_cancel_complete(); break; case BTM_PAIR_STATE_WAIT_LOCAL_PIN: if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_PRE_FETCH_PIN) == 0) btsnd_hcic_pin_code_neg_reply(p_cb->pairing_bda); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); /* We need to notify the UI that no longer need the PIN */ if (btm_cb.api.p_auth_complete_callback) { if (p_dev_rec == NULL) { name[0] = 0; (*btm_cb.api.p_auth_complete_callback)(p_cb->pairing_bda, NULL, name, HCI_ERR_CONNECTION_TOUT); } else (*btm_cb.api.p_auth_complete_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, HCI_ERR_CONNECTION_TOUT); } break; case BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM: btsnd_hcic_user_conf_reply(p_cb->pairing_bda, false); /* btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE); */ break; case BTM_PAIR_STATE_KEY_ENTRY: if (btm_cb.devcb.loc_io_caps != BTM_IO_CAP_NONE) { btsnd_hcic_user_passkey_neg_reply(p_cb->pairing_bda); } else { btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); } break; case BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS: if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) auth_req |= BTM_AUTH_DD_BOND; btsnd_hcic_io_cap_req_reply(p_cb->pairing_bda, btm_cb.devcb.loc_io_caps, BTM_OOB_NONE, auth_req); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); break; case BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP: btsnd_hcic_rem_oob_neg_reply(p_cb->pairing_bda); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); break; case BTM_PAIR_STATE_WAIT_DISCONNECT: /* simple pairing failed. Started a 1-sec timer at simple pairing * complete. * now it's time to tear down the ACL link*/ if (p_dev_rec == NULL) { LOG(ERROR) << __func__ << " BTM_PAIR_STATE_WAIT_DISCONNECT unknown BDA: " << p_cb->pairing_bda; break; } btm_sec_send_hci_disconnect(p_dev_rec, HCI_ERR_AUTH_FAILURE, p_dev_rec->hci_handle); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); break; case BTM_PAIR_STATE_WAIT_AUTH_COMPLETE: case BTM_PAIR_STATE_GET_REM_NAME: /* We need to notify the UI that timeout has happened while waiting for * authentication*/ btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); if (btm_cb.api.p_auth_complete_callback) { if (p_dev_rec == NULL) { name[0] = 0; (*btm_cb.api.p_auth_complete_callback)(p_cb->pairing_bda, NULL, name, HCI_ERR_CONNECTION_TOUT); } else (*btm_cb.api.p_auth_complete_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, HCI_ERR_CONNECTION_TOUT); } break; default: BTM_TRACE_WARNING("%s not processed state: %s", __func__, btm_pair_state_descr(btm_cb.pairing_state)); btm_sec_change_pairing_state(BTM_PAIR_STATE_IDLE); break; } } /******************************************************************************* * * Function btm_sec_pin_code_request * * Description This function is called when controller requests PIN code * * Returns Pointer to the record or NULL * ******************************************************************************/ void btm_sec_pin_code_request(const RawAddress& p_bda) { tBTM_SEC_DEV_REC* p_dev_rec; tBTM_CB* p_cb = &btm_cb; VLOG(2) << __func__ << " BDA: " << p_bda << " state: " << btm_pair_state_descr(btm_cb.pairing_state); if (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) { if ((p_bda == btm_cb.pairing_bda) && (btm_cb.pairing_state == BTM_PAIR_STATE_WAIT_AUTH_COMPLETE)) { btsnd_hcic_pin_code_neg_reply(p_bda); return; } else if ((btm_cb.pairing_state != BTM_PAIR_STATE_WAIT_PIN_REQ) || p_bda != btm_cb.pairing_bda) { BTM_TRACE_WARNING("btm_sec_pin_code_request() rejected - state: %s", btm_pair_state_descr(btm_cb.pairing_state)); btsnd_hcic_pin_code_neg_reply(p_bda); return; } } p_dev_rec = btm_find_or_alloc_dev(p_bda); /* received PIN code request. must be non-sm4 */ p_dev_rec->sm4 = BTM_SM4_KNOWN; if (btm_cb.pairing_state == BTM_PAIR_STATE_IDLE) { btm_cb.pairing_bda = p_bda; btm_cb.pairing_flags = BTM_PAIR_FLAGS_PEER_STARTED_DD; /* Make sure we reset the trusted mask to help against attacks */ BTM_SEC_CLR_TRUSTED_DEVICE(p_dev_rec->trusted_mask); } if (!p_cb->pairing_disabled && (p_cb->cfg.pin_type == HCI_PIN_TYPE_FIXED)) { BTM_TRACE_EVENT("btm_sec_pin_code_request fixed pin replying"); btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_AUTH_COMPLETE); btsnd_hcic_pin_code_req_reply(p_bda, p_cb->cfg.pin_code_len, p_cb->cfg.pin_code); return; } /* Use the connecting device's CoD for the connection */ if ((p_bda == p_cb->connecting_bda) && (p_cb->connecting_dc[0] || p_cb->connecting_dc[1] || p_cb->connecting_dc[2])) memcpy(p_dev_rec->dev_class, p_cb->connecting_dc, DEV_CLASS_LEN); /* We could have started connection after asking user for the PIN code */ if (btm_cb.pin_code_len != 0) { BTM_TRACE_EVENT("btm_sec_pin_code_request bonding sending reply"); btsnd_hcic_pin_code_req_reply(p_bda, btm_cb.pin_code_len, p_cb->pin_code); /* Mark that we forwarded received from the user PIN code */ btm_cb.pin_code_len = 0; /* We can change mode back right away, that other connection being * established */ /* is not forced to be secure - found a FW issue, so we can not do this btm_restore_mode(); */ btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_AUTH_COMPLETE); } /* If pairing disabled OR (no PIN callback and not bonding) */ /* OR we could not allocate entry in the database reject pairing request */ else if ( p_cb->pairing_disabled || (p_cb->api.p_pin_callback == NULL) /* OR Microsoft keyboard can for some reason try to establish connection */ /* the only thing we can do here is to shut it up. Normally we will be originator */ /* for keyboard bonding */ || (!p_dev_rec->is_originator && ((p_dev_rec->dev_class[1] & BTM_COD_MAJOR_CLASS_MASK) == BTM_COD_MAJOR_PERIPHERAL) && (p_dev_rec->dev_class[2] & BTM_COD_MINOR_KEYBOARD))) { BTM_TRACE_WARNING( "btm_sec_pin_code_request(): Pairing disabled:%d; PIN callback:%x, Dev " "Rec:%x!", p_cb->pairing_disabled, p_cb->api.p_pin_callback, p_dev_rec); btsnd_hcic_pin_code_neg_reply(p_bda); } /* Notify upper layer of PIN request and start expiration timer */ else { btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_LOCAL_PIN); /* Pin code request can not come at the same time as connection request */ p_cb->connecting_bda = p_bda; memcpy(p_cb->connecting_dc, p_dev_rec->dev_class, DEV_CLASS_LEN); /* Check if the name is known */ /* Even if name is not known we might not be able to get one */ /* this is the case when we are already getting something from the */ /* device, so HCI level is flow controlled */ /* Also cannot send remote name request while paging, i.e. connection is not * completed */ if (p_dev_rec->sec_flags & BTM_SEC_NAME_KNOWN) { BTM_TRACE_EVENT("btm_sec_pin_code_request going for callback"); btm_cb.pairing_flags |= BTM_PAIR_FLAGS_PIN_REQD; if (p_cb->api.p_pin_callback) { (*p_cb->api.p_pin_callback)( p_bda, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, (p_dev_rec->p_cur_service == NULL) ? false : (p_dev_rec->p_cur_service->security_flags & BTM_SEC_IN_MIN_16_DIGIT_PIN)); } } else { BTM_TRACE_EVENT("btm_sec_pin_code_request going for remote name"); /* We received PIN code request for the device with unknown name */ /* it is not user friendly just to ask for the PIN without name */ /* try to get name at first */ SendRemoteNameRequest(p_dev_rec->bd_addr); } } return; } /******************************************************************************* * * Function btm_sec_update_clock_offset * * Description This function is called to update clock offset * * Returns void * ******************************************************************************/ void btm_sec_update_clock_offset(uint16_t handle, uint16_t clock_offset) { tBTM_SEC_DEV_REC* p_dev_rec; tBTM_INQ_INFO* p_inq_info; p_dev_rec = btm_find_dev_by_handle(handle); if (p_dev_rec == NULL) return; p_dev_rec->clock_offset = clock_offset | BTM_CLOCK_OFFSET_VALID; p_inq_info = BTM_InqDbRead(p_dev_rec->bd_addr); if (p_inq_info == NULL) return; p_inq_info->results.clock_offset = clock_offset | BTM_CLOCK_OFFSET_VALID; } /****************************************************************** * S T A T I C F U N C T I O N S ******************************************************************/ /******************************************************************************* * * Function btm_sec_execute_procedure * * Description This function is called to start required security * procedure. There is a case when multiplexing protocol * calls this function on the originating side, connection to * the peer will not be established. This function in this * case performs only authorization. * * Returns BTM_SUCCESS - permission is granted * BTM_CMD_STARTED - in process * BTM_NO_RESOURCES - permission declined * ******************************************************************************/ tBTM_STATUS btm_sec_execute_procedure(tBTM_SEC_DEV_REC* p_dev_rec) { BTM_TRACE_EVENT( "btm_sec_execute_procedure: Required:0x%x Flags:0x%x State:%d", p_dev_rec->security_required, p_dev_rec->sec_flags, p_dev_rec->sec_state); /* There is a chance that we are getting name. Wait until done. */ if (p_dev_rec->sec_state != 0) return (BTM_CMD_STARTED); /* If any security is required, get the name first */ if (!(p_dev_rec->sec_flags & BTM_SEC_NAME_KNOWN) && (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE)) { BTM_TRACE_EVENT("Security Manager: Start get name"); if (!btm_sec_start_get_name(p_dev_rec)) { return (BTM_NO_RESOURCES); } return (BTM_CMD_STARTED); } /* If connection is not authenticated and authentication is required */ /* start authentication and return PENDING to the caller */ if ((((!(p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED)) && ((p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_OUT_AUTHENTICATE)) || (!p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_IN_AUTHENTICATE)))) || (!(p_dev_rec->sec_flags & BTM_SEC_16_DIGIT_PIN_AUTHED) && (!p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_IN_MIN_16_DIGIT_PIN)))) && (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE)) { /* * We rely on BTM_SEC_16_DIGIT_PIN_AUTHED being set if MITM is in use, * as 16 DIGIT is only needed if MITM is not used. Unfortunately, the * BTM_SEC_AUTHENTICATED is used for both MITM and non-MITM * authenticated connections, hence we cannot distinguish here. */ BTM_TRACE_EVENT("Security Manager: Start authentication"); /* * If we do have a link-key, but we end up here because we need an * upgrade, then clear the link-key known and authenticated flag before * restarting authentication. * WARNING: If the controller has link-key, it is optional and * recommended for the controller to send a Link_Key_Request. * In case we need an upgrade, the only alternative would be to delete * the existing link-key. That could lead to very bad user experience * or even IOP issues, if a reconnect causes a new connection that * requires an upgrade. */ if ((p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN) && (!(p_dev_rec->sec_flags & BTM_SEC_16_DIGIT_PIN_AUTHED) && (!p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_IN_MIN_16_DIGIT_PIN)))) { p_dev_rec->sec_flags &= ~(BTM_SEC_LINK_KEY_KNOWN | BTM_SEC_LINK_KEY_AUTHED | BTM_SEC_AUTHENTICATED); } btm_sec_start_authentication(p_dev_rec); return (BTM_CMD_STARTED); } /* If connection is not encrypted and encryption is required */ /* start encryption and return PENDING to the caller */ if (!(p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED) && ((p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_OUT_ENCRYPT)) || (!p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_IN_ENCRYPT))) && (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE)) { BTM_TRACE_EVENT("Security Manager: Start encryption"); btm_sec_start_encryption(p_dev_rec); return (BTM_CMD_STARTED); } if ((p_dev_rec->security_required & BTM_SEC_MODE4_LEVEL4) && (p_dev_rec->link_key_type != BTM_LKEY_TYPE_AUTH_COMB_P_256)) { BTM_TRACE_EVENT( "%s: Security Manager: SC only service, but link key type is 0x%02x -", "security failure", __func__, p_dev_rec->link_key_type); return (BTM_FAILED_ON_SECURITY); } /* If connection is not authorized and authorization is required */ /* start authorization and return PENDING to the caller */ if (!(p_dev_rec->sec_flags & BTM_SEC_AUTHORIZED) && ((p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_OUT_AUTHORIZE)) || (!p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_IN_AUTHORIZE)))) { BTM_TRACE_EVENT( "service id:%d, is trusted:%d", p_dev_rec->p_cur_service->service_id, (BTM_SEC_IS_SERVICE_TRUSTED(p_dev_rec->trusted_mask, p_dev_rec->p_cur_service->service_id))); if ((!btm_sec_are_all_trusted(p_dev_rec->trusted_mask)) && (p_dev_rec->p_cur_service->service_id < BTM_SEC_MAX_SERVICES) && (!BTM_SEC_IS_SERVICE_TRUSTED(p_dev_rec->trusted_mask, p_dev_rec->p_cur_service->service_id))) { BTM_TRACE_EVENT("Security Manager: Start authorization"); return (btm_sec_start_authorization(p_dev_rec)); } } /* All required security procedures already established */ p_dev_rec->security_required &= ~(BTM_SEC_OUT_AUTHORIZE | BTM_SEC_IN_AUTHORIZE | BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_IN_AUTHENTICATE | BTM_SEC_OUT_ENCRYPT | BTM_SEC_IN_ENCRYPT | BTM_SEC_FORCE_MASTER | BTM_SEC_ATTEMPT_MASTER | BTM_SEC_FORCE_SLAVE | BTM_SEC_ATTEMPT_SLAVE); BTM_TRACE_EVENT("Security Manager: trusted:0x%04x%04x", p_dev_rec->trusted_mask[1], p_dev_rec->trusted_mask[0]); BTM_TRACE_EVENT("Security Manager: access granted"); return (BTM_SUCCESS); } /******************************************************************************* * * Function btm_sec_start_get_name * * Description This function is called to start get name procedure * * Returns true if started * ******************************************************************************/ static bool btm_sec_start_get_name(tBTM_SEC_DEV_REC* p_dev_rec) { if (!BTM_IsDeviceUp()) return false; p_dev_rec->sec_state = BTM_SEC_STATE_GETTING_NAME; /* 0 and NULL are as timeout and callback params because they are not used in * security get name case */ SendRemoteNameRequest(p_dev_rec->bd_addr); return true; } /******************************************************************************* * * Function btm_sec_start_authentication * * Description This function is called to start authentication * ******************************************************************************/ static void btm_sec_start_authentication(tBTM_SEC_DEV_REC* p_dev_rec) { p_dev_rec->sec_state = BTM_SEC_STATE_AUTHENTICATING; btsnd_hcic_auth_request(p_dev_rec->hci_handle); } /******************************************************************************* * * Function btm_sec_start_encryption * * Description This function is called to start encryption * ******************************************************************************/ static void btm_sec_start_encryption(tBTM_SEC_DEV_REC* p_dev_rec) { btsnd_hcic_set_conn_encrypt(p_dev_rec->hci_handle, true); p_dev_rec->sec_state = BTM_SEC_STATE_ENCRYPTING; } /******************************************************************************* * * Function btm_sec_start_authorization * * Description This function is called to start authorization * * Returns true if started * ******************************************************************************/ static uint8_t btm_sec_start_authorization(tBTM_SEC_DEV_REC* p_dev_rec) { uint8_t result; uint8_t* p_service_name = NULL; uint8_t service_id; if ((p_dev_rec->sec_flags & BTM_SEC_NAME_KNOWN) || (p_dev_rec->hci_handle == BTM_SEC_INVALID_HANDLE)) { if (!btm_cb.api.p_authorize_callback) return (BTM_MODE_UNSUPPORTED); if (p_dev_rec->p_cur_service) { #if BTM_SEC_SERVICE_NAME_LEN > 0 if (p_dev_rec->is_originator) p_service_name = p_dev_rec->p_cur_service->orig_service_name; else p_service_name = p_dev_rec->p_cur_service->term_service_name; #endif service_id = p_dev_rec->p_cur_service->service_id; } else service_id = 0; /* Send authorization request if not already sent during this service * connection */ if (p_dev_rec->last_author_service_id == BTM_SEC_NO_LAST_SERVICE_ID || p_dev_rec->last_author_service_id != service_id) { p_dev_rec->sec_state = BTM_SEC_STATE_AUTHORIZING; result = (*btm_cb.api.p_authorize_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, p_service_name, service_id, p_dev_rec->is_originator); } else /* Already authorized once for this L2CAP bringup */ { BTM_TRACE_DEBUG( "btm_sec_start_authorization: (Ignoring extra Authorization prompt " "for service %d)", service_id); return (BTM_SUCCESS); } if (result == BTM_SUCCESS) { p_dev_rec->sec_flags |= BTM_SEC_AUTHORIZED; /* Save the currently authorized service in case we are asked again by * another multiplexer layer */ if (!p_dev_rec->is_originator) p_dev_rec->last_author_service_id = service_id; p_dev_rec->sec_state = BTM_SEC_STATE_IDLE; } return (result); } btm_sec_start_get_name(p_dev_rec); return (BTM_CMD_STARTED); } /******************************************************************************* * * Function btm_sec_are_all_trusted * * Description This function is called check if all services are trusted * * Returns true if all are trusted, otherwise false * ******************************************************************************/ bool btm_sec_are_all_trusted(uint32_t p_mask[]) { uint32_t trusted_inx; for (trusted_inx = 0; trusted_inx < BTM_SEC_SERVICE_ARRAY_SIZE; trusted_inx++) { if (p_mask[trusted_inx] != BTM_SEC_TRUST_ALL) return (false); } return (true); } /******************************************************************************* * * Function btm_sec_find_first_serv * * Description Look for the first record in the service database * with specified PSM * * Returns Pointer to the record or NULL * ******************************************************************************/ tBTM_SEC_SERV_REC* btm_sec_find_first_serv(CONNECTION_TYPE conn_type, uint16_t psm) { tBTM_SEC_SERV_REC* p_serv_rec = &btm_cb.sec_serv_rec[0]; int i; bool is_originator = conn_type; if (is_originator && btm_cb.p_out_serv && btm_cb.p_out_serv->psm == psm) { /* If this is outgoing connection and the PSM matches p_out_serv, * use it as the current service */ return btm_cb.p_out_serv; } /* otherwise, just find the first record with the specified PSM */ for (i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_serv_rec++) { if ((p_serv_rec->security_flags & BTM_SEC_IN_USE) && (p_serv_rec->psm == psm)) return (p_serv_rec); } return (NULL); } /******************************************************************************* * * Function btm_sec_find_next_serv * * Description Look for the next record in the service database * with specified PSM * * Returns Pointer to the record or NULL * ******************************************************************************/ static tBTM_SEC_SERV_REC* btm_sec_find_next_serv(tBTM_SEC_SERV_REC* p_cur) { tBTM_SEC_SERV_REC* p_serv_rec = &btm_cb.sec_serv_rec[0]; int i; for (i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_serv_rec++) { if ((p_serv_rec->security_flags & BTM_SEC_IN_USE) && (p_serv_rec->psm == p_cur->psm)) { if (p_cur != p_serv_rec) { return (p_serv_rec); } } } return (NULL); } /******************************************************************************* * * Function btm_sec_find_mx_serv * * Description Look for the record in the service database with specified * PSM and multiplexor channel information * * Returns Pointer to the record or NULL * ******************************************************************************/ static tBTM_SEC_SERV_REC* btm_sec_find_mx_serv(uint8_t is_originator, uint16_t psm, uint32_t mx_proto_id, uint32_t mx_chan_id) { tBTM_SEC_SERV_REC* p_out_serv = btm_cb.p_out_serv; tBTM_SEC_SERV_REC* p_serv_rec = &btm_cb.sec_serv_rec[0]; int i; BTM_TRACE_DEBUG("%s()", __func__); if (is_originator && p_out_serv && p_out_serv->psm == psm && p_out_serv->mx_proto_id == mx_proto_id && p_out_serv->orig_mx_chan_id == mx_chan_id) { /* If this is outgoing connection and the parameters match p_out_serv, * use it as the current service */ return btm_cb.p_out_serv; } /* otherwise, the old way */ for (i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_serv_rec++) { if ((p_serv_rec->security_flags & BTM_SEC_IN_USE) && (p_serv_rec->psm == psm) && (p_serv_rec->mx_proto_id == mx_proto_id) && ((is_originator && (p_serv_rec->orig_mx_chan_id == mx_chan_id)) || (!is_originator && (p_serv_rec->term_mx_chan_id == mx_chan_id)))) { return (p_serv_rec); } } return (NULL); } /******************************************************************************* * * Function btm_sec_collision_timeout * * Description Encryption could not start because of the collision * try to do it again * * Returns Pointer to the TLE struct * ******************************************************************************/ static void btm_sec_collision_timeout(UNUSED_ATTR void* data) { BTM_TRACE_EVENT("%s()", __func__); tBTM_STATUS status = btm_sec_execute_procedure(btm_cb.p_collided_dev_rec); /* If result is pending reply from the user or from the device is pending */ if (status != BTM_CMD_STARTED) { /* There is no next procedure or start of procedure failed, notify the * waiting layer */ btm_sec_dev_rec_cback_event(btm_cb.p_collided_dev_rec, status, false); } } /******************************************************************************* * * Function btm_send_link_key_notif * * Description Call the link key callback. * * Returns void * ******************************************************************************/ static void btm_send_link_key_notif(tBTM_SEC_DEV_REC* p_dev_rec) { if (btm_cb.api.p_link_key_callback) (*btm_cb.api.p_link_key_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, p_dev_rec->link_key, p_dev_rec->link_key_type); } /******************************************************************************* * * Function BTM_ReadTrustedMask * * Description Get trusted mask for the peer device * * Parameters: bd_addr - Address of the device * * Returns NULL, if the device record is not found. * otherwise, the trusted mask * ******************************************************************************/ uint32_t* BTM_ReadTrustedMask(const RawAddress& bd_addr) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev(bd_addr); if (p_dev_rec != NULL) return (p_dev_rec->trusted_mask); return NULL; } /******************************************************************************* * * Function btm_restore_mode * * Description This function returns the security mode to previous setting * if it was changed during bonding. * * * Parameters: void * ******************************************************************************/ static void btm_restore_mode(void) { if (btm_cb.security_mode_changed) { btm_cb.security_mode_changed = false; BTM_TRACE_DEBUG("%s() Auth enable -> %d", __func__, (btm_cb.security_mode == BTM_SEC_MODE_LINK)); btsnd_hcic_write_auth_enable( (uint8_t)(btm_cb.security_mode == BTM_SEC_MODE_LINK)); } if (btm_cb.pin_type_changed) { btm_cb.pin_type_changed = false; btsnd_hcic_write_pin_type(btm_cb.cfg.pin_type); } } bool is_sec_state_equal(void* data, void* context) { tBTM_SEC_DEV_REC* p_dev_rec = static_cast(data); uint8_t* state = static_cast(context); if (p_dev_rec->sec_state == *state) return false; return true; } /******************************************************************************* * * Function btm_sec_find_dev_by_sec_state * * Description Look for the record in the device database for the device * which is being authenticated or encrypted * * Returns Pointer to the record or NULL * ******************************************************************************/ tBTM_SEC_DEV_REC* btm_sec_find_dev_by_sec_state(uint8_t state) { list_node_t* n = list_foreach(btm_cb.sec_dev_rec, is_sec_state_equal, &state); if (n) return static_cast(list_node(n)); return NULL; } /******************************************************************************* * * Function btm_sec_change_pairing_state * * Description This function is called to change pairing state * ******************************************************************************/ static void btm_sec_change_pairing_state(tBTM_PAIRING_STATE new_state) { tBTM_PAIRING_STATE old_state = btm_cb.pairing_state; BTM_TRACE_EVENT("%s() Old: %s", __func__, btm_pair_state_descr(btm_cb.pairing_state)); BTM_TRACE_EVENT("%s() New: %s pairing_flags:0x%x", __func__, btm_pair_state_descr(new_state), btm_cb.pairing_flags); btm_cb.pairing_state = new_state; if (new_state == BTM_PAIR_STATE_IDLE) { alarm_cancel(btm_cb.pairing_timer); btm_cb.pairing_flags = 0; btm_cb.pin_code_len = 0; /* Make sure the the lcb shows we are not bonding */ l2cu_update_lcb_4_bonding(btm_cb.pairing_bda, false); btm_restore_mode(); btm_sec_check_pending_reqs(); btm_inq_clear_ssp(); btm_cb.pairing_bda = RawAddress::kAny; } else { /* If transitioning out of idle, mark the lcb as bonding */ if (old_state == BTM_PAIR_STATE_IDLE) l2cu_update_lcb_4_bonding(btm_cb.pairing_bda, true); alarm_set_on_mloop(btm_cb.pairing_timer, BTM_SEC_TIMEOUT_VALUE * 1000, btm_sec_pairing_timeout, NULL); } } /******************************************************************************* * * Function btm_pair_state_descr * * Description Return state description for tracing * ******************************************************************************/ static const char* btm_pair_state_descr(tBTM_PAIRING_STATE state) { switch (state) { case BTM_PAIR_STATE_IDLE: return ("IDLE"); case BTM_PAIR_STATE_GET_REM_NAME: return ("GET_REM_NAME"); case BTM_PAIR_STATE_WAIT_PIN_REQ: return ("WAIT_PIN_REQ"); case BTM_PAIR_STATE_WAIT_LOCAL_PIN: return ("WAIT_LOCAL_PIN"); case BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM: return ("WAIT_NUM_CONFIRM"); case BTM_PAIR_STATE_KEY_ENTRY: return ("KEY_ENTRY"); case BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP: return ("WAIT_LOCAL_OOB_RSP"); case BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS: return ("WAIT_LOCAL_IOCAPS"); case BTM_PAIR_STATE_INCOMING_SSP: return ("INCOMING_SSP"); case BTM_PAIR_STATE_WAIT_AUTH_COMPLETE: return ("WAIT_AUTH_COMPLETE"); case BTM_PAIR_STATE_WAIT_DISCONNECT: return ("WAIT_DISCONNECT"); } return ("???"); } /******************************************************************************* * * Function btm_sec_dev_rec_cback_event * * Description This function calls the callback function with the given * result and clear the callback function. * * Parameters: void * ******************************************************************************/ void btm_sec_dev_rec_cback_event(tBTM_SEC_DEV_REC* p_dev_rec, uint8_t res, bool is_le_transport) { tBTM_SEC_CALLBACK* p_callback = p_dev_rec->p_callback; BTM_TRACE_DEBUG("%s: p_callback=%p, is_le_transport=%d, res=%d, p_dev_rec=%p", __func__, p_dev_rec->p_callback, is_le_transport, res, p_dev_rec); if (p_dev_rec->p_callback) { p_dev_rec->p_callback = NULL; if (is_le_transport) (*p_callback)(&p_dev_rec->ble.pseudo_addr, BT_TRANSPORT_LE, p_dev_rec->p_ref_data, res); else (*p_callback)(&p_dev_rec->bd_addr, BT_TRANSPORT_BR_EDR, p_dev_rec->p_ref_data, res); } btm_sec_check_pending_reqs(); } /******************************************************************************* * * Function btm_sec_queue_mx_request * * Description Return state description for tracing * ******************************************************************************/ static bool btm_sec_queue_mx_request(const RawAddress& bd_addr, uint16_t psm, bool is_orig, uint32_t mx_proto_id, uint32_t mx_chan_id, tBTM_SEC_CALLBACK* p_callback, void* p_ref_data) { tBTM_SEC_QUEUE_ENTRY* p_e = (tBTM_SEC_QUEUE_ENTRY*)osi_malloc(sizeof(tBTM_SEC_QUEUE_ENTRY)); p_e->psm = psm; p_e->is_orig = is_orig; p_e->p_callback = p_callback; p_e->p_ref_data = p_ref_data; p_e->mx_proto_id = mx_proto_id; p_e->mx_chan_id = mx_chan_id; p_e->transport = BT_TRANSPORT_BR_EDR; p_e->sec_act = 0; p_e->bd_addr = bd_addr; BTM_TRACE_EVENT( "%s() PSM: 0x%04x Is_Orig: %u mx_proto_id: %u mx_chan_id: %u", __func__, psm, is_orig, mx_proto_id, mx_chan_id); fixed_queue_enqueue(btm_cb.sec_pending_q, p_e); return true; } static bool btm_sec_check_prefetch_pin(tBTM_SEC_DEV_REC* p_dev_rec) { uint8_t major = (uint8_t)(p_dev_rec->dev_class[1] & BTM_COD_MAJOR_CLASS_MASK); uint8_t minor = (uint8_t)(p_dev_rec->dev_class[2] & BTM_COD_MINOR_CLASS_MASK); bool rv = false; if ((major == BTM_COD_MAJOR_AUDIO) && ((minor == BTM_COD_MINOR_CONFM_HANDSFREE) || (minor == BTM_COD_MINOR_CAR_AUDIO))) { BTM_TRACE_EVENT( "%s() Skipping pre-fetch PIN for carkit COD Major: 0x%02x Minor: " "0x%02x", __func__, major, minor); if (!btm_cb.security_mode_changed) { btm_cb.security_mode_changed = true; #ifdef APPL_AUTH_WRITE_EXCEPTION if (!(APPL_AUTH_WRITE_EXCEPTION)(p_dev_rec->bd_addr)) #endif btsnd_hcic_write_auth_enable(true); } } else { btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_LOCAL_PIN); /* If we got a PIN, use that, else try to get one */ if (btm_cb.pin_code_len) { BTM_PINCodeReply(p_dev_rec->bd_addr, BTM_SUCCESS, btm_cb.pin_code_len, btm_cb.pin_code, p_dev_rec->trusted_mask); } else { /* pin was not supplied - pre-fetch pin code now */ if (btm_cb.api.p_pin_callback && ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_PIN_REQD) == 0)) { BTM_TRACE_DEBUG("%s() PIN code callback called", __func__); if (btm_bda_to_acl(p_dev_rec->bd_addr, BT_TRANSPORT_BR_EDR) == NULL) btm_cb.pairing_flags |= BTM_PAIR_FLAGS_PIN_REQD; (btm_cb.api.p_pin_callback)( p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, (p_dev_rec->p_cur_service == NULL) ? false : (p_dev_rec->p_cur_service->security_flags & BTM_SEC_IN_MIN_16_DIGIT_PIN)); } } rv = true; } return rv; } /******************************************************************************* * * Function btm_sec_auth_payload_tout * * Description Processes the HCI Autheniticated Payload Timeout Event * indicating that a packet containing a valid MIC on the * connection handle was not received within the programmed * timeout value. (Spec Default is 30 secs, but can be * changed via the BTM_SecSetAuthPayloadTimeout() function. * ******************************************************************************/ void btm_sec_auth_payload_tout(uint8_t* p, uint16_t hci_evt_len) { uint16_t handle; STREAM_TO_UINT16(handle, p); handle = HCID_GET_HANDLE(handle); /* Will be exposed to upper layers in the future if/when determined necessary */ BTM_TRACE_ERROR("%s on handle 0x%02x", __func__, handle); } /******************************************************************************* * * Function btm_sec_queue_encrypt_request * * Description encqueue encryption request when device has active security * process pending. * ******************************************************************************/ static bool btm_sec_queue_encrypt_request(const RawAddress& bd_addr, tBT_TRANSPORT transport, tBTM_SEC_CALLBACK* p_callback, void* p_ref_data, tBTM_BLE_SEC_ACT sec_act) { tBTM_SEC_QUEUE_ENTRY* p_e = (tBTM_SEC_QUEUE_ENTRY*)osi_malloc(sizeof(tBTM_SEC_QUEUE_ENTRY) + 1); p_e->psm = 0; /* if PSM 0, encryption request */ p_e->p_callback = p_callback; p_e->p_ref_data = p_ref_data; p_e->transport = transport; p_e->sec_act = sec_act; p_e->bd_addr = bd_addr; fixed_queue_enqueue(btm_cb.sec_pending_q, p_e); return true; } /******************************************************************************* * * Function btm_sec_set_peer_sec_caps * * Description This function is called to set sm4 and rmt_sec_caps fields * based on the available peer device features. * * Returns void * ******************************************************************************/ void btm_sec_set_peer_sec_caps(tACL_CONN* p_acl_cb, tBTM_SEC_DEV_REC* p_dev_rec) { if ((btm_cb.security_mode == BTM_SEC_MODE_SP || btm_cb.security_mode == BTM_SEC_MODE_SP_DEBUG || btm_cb.security_mode == BTM_SEC_MODE_SC) && HCI_SSP_HOST_SUPPORTED(p_acl_cb->peer_lmp_feature_pages[1])) { p_dev_rec->sm4 = BTM_SM4_TRUE; p_dev_rec->remote_supports_secure_connections = (HCI_SC_HOST_SUPPORTED(p_acl_cb->peer_lmp_feature_pages[1])); } else { p_dev_rec->sm4 = BTM_SM4_KNOWN; p_dev_rec->remote_supports_secure_connections = false; } BTM_TRACE_API("%s: sm4: 0x%02x, rmt_support_for_secure_connections %d", __func__, p_dev_rec->sm4, p_dev_rec->remote_supports_secure_connections); if (p_dev_rec->remote_features_needed) { BTM_TRACE_EVENT( "%s: Now device in SC Only mode, waiting for peer remote features!", __func__); btm_io_capabilities_req(p_dev_rec->bd_addr); p_dev_rec->remote_features_needed = false; } } /******************************************************************************* * * Function btm_sec_is_serv_level0 * * Description This function is called to check if the service * corresponding to PSM is security mode 4 level 0 service. * * Returns true if the service is security mode 4 level 0 service * ******************************************************************************/ static bool btm_sec_is_serv_level0(uint16_t psm) { if (psm == BT_PSM_SDP) { BTM_TRACE_DEBUG("%s: PSM: 0x%04x -> mode 4 level 0 service", __func__, psm); return true; } return false; } /******************************************************************************* * * Function btm_sec_check_pending_enc_req * * Description This function is called to send pending encryption callback * if waiting * * Returns void * ******************************************************************************/ static void btm_sec_check_pending_enc_req(tBTM_SEC_DEV_REC* p_dev_rec, tBT_TRANSPORT transport, uint8_t encr_enable) { if (fixed_queue_is_empty(btm_cb.sec_pending_q)) return; uint8_t res = encr_enable ? BTM_SUCCESS : BTM_ERR_PROCESSING; list_t* list = fixed_queue_get_list(btm_cb.sec_pending_q); for (const list_node_t* node = list_begin(list); node != list_end(list);) { tBTM_SEC_QUEUE_ENTRY* p_e = (tBTM_SEC_QUEUE_ENTRY*)list_node(node); node = list_next(node); if (p_e->bd_addr == p_dev_rec->bd_addr && p_e->psm == 0 && p_e->transport == transport) { if (encr_enable == 0 || transport == BT_TRANSPORT_BR_EDR || p_e->sec_act == BTM_BLE_SEC_ENCRYPT || p_e->sec_act == BTM_BLE_SEC_ENCRYPT_NO_MITM || (p_e->sec_act == BTM_BLE_SEC_ENCRYPT_MITM && p_dev_rec->sec_flags & BTM_SEC_LE_AUTHENTICATED)) { if (p_e->p_callback) (*p_e->p_callback)(&p_dev_rec->bd_addr, transport, p_e->p_ref_data, res); fixed_queue_try_remove_from_queue(btm_cb.sec_pending_q, (void*)p_e); } } } } /******************************************************************************* * * Function btm_sec_set_serv_level4_flags * * Description This function is called to set security mode 4 level 4 * flags. * * Returns service security requirements updated to include secure * connections only mode. * ******************************************************************************/ static uint16_t btm_sec_set_serv_level4_flags(uint16_t cur_security, bool is_originator) { uint16_t sec_level4_flags = is_originator ? BTM_SEC_OUT_LEVEL4_FLAGS : BTM_SEC_IN_LEVEL4_FLAGS; return cur_security | sec_level4_flags; } /******************************************************************************* * * Function btm_sec_clear_ble_keys * * Description This function is called to clear out the BLE keys. * Typically when devices are removed in BTM_SecDeleteDevice, * or when a new BT Link key is generated. * * Returns void * ******************************************************************************/ void btm_sec_clear_ble_keys(tBTM_SEC_DEV_REC* p_dev_rec) { BTM_TRACE_DEBUG("%s() Clearing BLE Keys", __func__); p_dev_rec->ble.key_type = BTM_LE_KEY_NONE; memset(&p_dev_rec->ble.keys, 0, sizeof(tBTM_SEC_BLE_KEYS)); #if (BLE_PRIVACY_SPT == TRUE) btm_ble_resolving_list_remove_dev(p_dev_rec); #endif } /******************************************************************************* * * Function btm_sec_is_a_bonded_dev * * Description Is the specified device is a bonded device * * Returns true - dev is bonded * ******************************************************************************/ bool btm_sec_is_a_bonded_dev(const RawAddress& bda) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev(bda); bool is_bonded = false; if (p_dev_rec && ((p_dev_rec->ble.key_type && (p_dev_rec->sec_flags & BTM_SEC_LE_LINK_KEY_KNOWN)) || (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN))) { is_bonded = true; } BTM_TRACE_DEBUG("%s() is_bonded=%d", __func__, is_bonded); return (is_bonded); } /******************************************************************************* * * Function btm_sec_is_le_capable_dev * * Description Is the specified device is dual mode or LE only device * * Returns true - dev is a dual mode * ******************************************************************************/ bool btm_sec_is_le_capable_dev(const RawAddress& bda) { tBTM_SEC_DEV_REC* p_dev_rec = btm_find_dev(bda); bool le_capable = false; if (p_dev_rec && (p_dev_rec->device_type & BT_DEVICE_TYPE_BLE) == BT_DEVICE_TYPE_BLE) le_capable = true; return le_capable; } /******************************************************************************* * * Function btm_sec_use_smp_br_chnl * * Description The function checks if SMP BR connection can be used with * the peer. * Is called when authentication for dedicated bonding is * successfully completed. * * Returns true - if SMP BR connection can be used (the link key is * generated from P-256 and the peer supports Security * Manager over BR). * ******************************************************************************/ static bool btm_sec_use_smp_br_chnl(tBTM_SEC_DEV_REC* p_dev_rec) { uint32_t ext_feat; uint8_t chnl_mask[L2CAP_FIXED_CHNL_ARRAY_SIZE]; BTM_TRACE_DEBUG("%s() link_key_type = 0x%x", __func__, p_dev_rec->link_key_type); if ((p_dev_rec->link_key_type != BTM_LKEY_TYPE_UNAUTH_COMB_P_256) && (p_dev_rec->link_key_type != BTM_LKEY_TYPE_AUTH_COMB_P_256)) return false; if (!L2CA_GetPeerFeatures(p_dev_rec->bd_addr, &ext_feat, chnl_mask)) return false; if (!(chnl_mask[0] & L2CAP_FIXED_CHNL_SMP_BR_BIT)) return false; return true; } /******************************************************************************* * * Function btm_sec_is_master * * Description The function checks if the device is BR/EDR master after * pairing is completed. * * Returns true - if the device is master. * ******************************************************************************/ static bool btm_sec_is_master(tBTM_SEC_DEV_REC* p_dev_rec) { tACL_CONN* p = btm_bda_to_acl(p_dev_rec->bd_addr, BT_TRANSPORT_BR_EDR); return (p && (p->link_role == BTM_ROLE_MASTER)); }