Lines Matching refs:is

8 # Each byte of MAC address is represented in Hex format as XX
30 # Valid values are 0,1. If commented out, the default value is 0.
46 # Flag to allow STA send AddTspec even when ACM is Off
143 #If set to 0, MCC is not allowed.
168 # Enable to check FW hash if secure FW feature is enabled. It's for defconfig
190 # Valid values are 0,1,2. If commented out, the default value is 0.
196 # Valid values are 0,1,2. If commented out, the default value is 0.
223 # LRO support is deprecated on latest 4.9(SDM845) kernel
253 #Timer value is in seconds
291 # set in bitmaps are allowed in probe request, all others removed while device is unassociated
321 # 0 implies no periodic wake up from IMPS. Periodic wakeup is
322 # unnecessary if Idle Scan is disabled.
378 #Check if the AP to which we are roaming is better than current AP in terms of RSSI.
379 #Checking is disabled if set to Zero.Otherwise it will use this value as to how better
383 # If the RSSI of any available candidate is better than currently associated
420 # through ini parameter. Default value is 1
447 # Default value of gEnableWoW is 3.
477 # Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
479 # and RSSI) is met and then will initiate teardown when teardown criteria
480 # (idle packet count and RSSI) is met.
485 # Enable TDLS External Control. That is, user space application has to
486 # first configure a peer MAC in wlan driver towards which TDLS is desired.
488 # TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
489 # when teardown criteria (idle packet count and RSSI) is met. However,
490 # device will accept TDLS connection if it is initiated from any other peer,
491 # even if that peer is not configured.
500 # TDLS off-channel operation will be invoked when there is only one
518 #For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 se…
527 # These parameters are used only if gEnable2x2 is 0
553 #IPA config is a bit mask and following are the configurations.
565 #gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
571 #gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send …
572 #Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPer…
595 # Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
606 #Auto Shutdown  Value in seconds. A value of 0 means Auto shutoff is disabled
704 #Timer value is in seconds