Lines Matching refs:is

8 # Each byte of MAC address is represented in Hex format as XX
30 # Valid values are 0,1. If commented out, the default value is 0.
46 # Flag to allow STA send AddTspec even when ACM is Off
139 # These parameters are used only if gEnable2x2 is 0
146 # 2.4GHz Antenna Sharing is not supported
149 #If set to 0, MCC is not allowed.
168 # Enable to check FW hash if secure FW feature is enabled. It's for defconfig
190 # Valid values are 0,1,2. If commented out, the default value is 0.
196 # Valid values are 0,1,2. If commented out, the default value is 0.
202 #IPA config is a bit mask and following are the configurations.
262 #Timer value is in seconds
306 # set in bitmaps are allowed in probe request, all others removed while device is unassociated
336 # 0 implies no periodic wake up from IMPS. Periodic wakeup is
337 # unnecessary if Idle Scan is disabled.
393 #Check if the AP to which we are roaming is better than current AP in terms of RSSI.
394 #Checking is disabled if set to Zero.Otherwise it will use this value as to how better
398 # If the RSSI of any available candidate is better than currently associated
440 # through ini parameter. Default value is 1
467 # Default value of gEnableWoW is 3.
497 # Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
499 # and RSSI) is met and then will initiate teardown when teardown criteria
500 # (idle packet count and RSSI) is met.
505 # Enable TDLS External Control. That is, user space application has to
506 # first configure a peer MAC in wlan driver towards which TDLS is desired.
508 # TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
509 # when teardown criteria (idle packet count and RSSI) is met. However,
510 # device will accept TDLS connection if it is initiated from any other peer,
511 # even if that peer is not configured.
520 # TDLS off-channel operation will be invoked when there is only one
538 #For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 se…
544 #Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still we try…
548 #gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
554 #gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send …
555 #Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPer…
578 # Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
589 #Auto Shutdown  Value in seconds. A value of 0 means Auto shutoff is disabled
670 #Timer value is in seconds