#!/usr/bin/env python3.4 # # Copyright 2016 - Google # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. """ Test Script for Telephony Pre Check In Sanity """ import time from acts import signals from acts.test_decorators import test_tracker_info from acts.test_utils.tel.loggers.protos.telephony_metric_pb2 import TelephonyVoiceTestResult from acts.test_utils.tel.loggers.telephony_metric_logger import TelephonyMetricLogger from acts.test_utils.tel.TelephonyBaseTest import TelephonyBaseTest from acts.test_utils.tel.tel_data_utils import wifi_cell_switching from acts.test_utils.tel.tel_defines import DIRECTION_MOBILE_ORIGINATED from acts.test_utils.tel.tel_defines import DIRECTION_MOBILE_TERMINATED from acts.test_utils.tel.tel_defines import GEN_2G from acts.test_utils.tel.tel_defines import GEN_4G from acts.test_utils.tel.tel_defines import CALL_STATE_ACTIVE from acts.test_utils.tel.tel_defines import CALL_STATE_HOLDING from acts.test_utils.tel.tel_defines import GEN_3G from acts.test_utils.tel.tel_defines import MAX_WAIT_TIME_NW_SELECTION from acts.test_utils.tel.tel_defines import NETWORK_SERVICE_DATA from acts.test_utils.tel.tel_defines import PHONE_TYPE_CDMA from acts.test_utils.tel.tel_defines import PHONE_TYPE_GSM from acts.test_utils.tel.tel_defines import WAIT_TIME_IN_CALL from acts.test_utils.tel.tel_defines import WAIT_TIME_IN_CALL_FOR_IMS from acts.test_utils.tel.tel_defines import WAIT_TIME_ANDROID_STATE_SETTLING from acts.test_utils.tel.tel_defines import WFC_MODE_CELLULAR_PREFERRED from acts.test_utils.tel.tel_defines import WFC_MODE_WIFI_ONLY from acts.test_utils.tel.tel_defines import WFC_MODE_WIFI_PREFERRED from acts.test_utils.tel.tel_subscription_utils import \ get_incoming_voice_sub_id from acts.test_utils.tel.tel_subscription_utils import \ get_outgoing_voice_sub_id from acts.test_utils.tel.tel_test_utils import call_setup_teardown from acts.test_utils.tel.tel_test_utils import \ call_voicemail_erase_all_pending_voicemail from acts.test_utils.tel.tel_test_utils import active_file_download_task from acts.utils import adb_shell_ping from acts.test_utils.tel.tel_test_utils import ensure_phones_default_state from acts.test_utils.tel.tel_test_utils import ensure_network_generation from acts.test_utils.tel.tel_test_utils import get_mobile_data_usage from acts.test_utils.tel.tel_test_utils import hangup_call from acts.test_utils.tel.tel_test_utils import initiate_call from acts.test_utils.tel.tel_test_utils import is_phone_in_call_active from acts.test_utils.tel.tel_test_utils import is_phone_in_call from acts.test_utils.tel.tel_test_utils import multithread_func from acts.test_utils.tel.tel_test_utils import num_active_calls from acts.test_utils.tel.tel_test_utils import remove_mobile_data_usage_limit from acts.test_utils.tel.tel_test_utils import run_multithread_func from acts.test_utils.tel.tel_test_utils import set_mobile_data_usage_limit from acts.test_utils.tel.tel_test_utils import verify_internet_connection from acts.test_utils.tel.tel_test_utils import verify_incall_state from acts.test_utils.tel.tel_test_utils import wait_for_cell_data_connection from acts.test_utils.tel.tel_test_utils import wait_for_ringing_call from acts.test_utils.tel.tel_test_utils import wait_for_state from acts.test_utils.tel.tel_test_utils import start_youtube_video from acts.test_utils.tel.tel_test_utils import set_wifi_to_default from acts.test_utils.tel.tel_test_utils import STORY_LINE from acts.test_utils.tel.tel_test_utils import wait_for_in_call_active from acts.test_utils.tel.tel_test_utils import set_preferred_mode_for_5g from acts.test_utils.tel.tel_test_utils import is_current_network_5g_nsa from acts.test_utils.tel.tel_voice_utils import is_phone_in_call_1x from acts.test_utils.tel.tel_voice_utils import is_phone_in_call_2g from acts.test_utils.tel.tel_voice_utils import is_phone_in_call_3g from acts.test_utils.tel.tel_voice_utils import is_phone_in_call_csfb from acts.test_utils.tel.tel_voice_utils import is_phone_in_call_iwlan from acts.test_utils.tel.tel_voice_utils import is_phone_in_call_not_iwlan from acts.test_utils.tel.tel_voice_utils import is_phone_in_call_wcdma from acts.test_utils.tel.tel_voice_utils import is_phone_in_call_volte from acts.test_utils.tel.tel_voice_utils import phone_setup_csfb from acts.test_utils.tel.tel_voice_utils import phone_setup_iwlan from acts.test_utils.tel.tel_voice_utils import \ phone_setup_iwlan_cellular_preferred from acts.test_utils.tel.tel_voice_utils import phone_setup_voice_2g from acts.test_utils.tel.tel_voice_utils import phone_setup_voice_3g from acts.test_utils.tel.tel_voice_utils import phone_setup_voice_general from acts.test_utils.tel.tel_voice_utils import phone_setup_volte from acts.test_utils.tel.tel_voice_utils import phone_idle_2g from acts.test_utils.tel.tel_voice_utils import phone_idle_3g from acts.test_utils.tel.tel_voice_utils import phone_idle_csfb from acts.test_utils.tel.tel_voice_utils import phone_idle_iwlan from acts.test_utils.tel.tel_voice_utils import phone_idle_volte from acts.test_utils.tel.tel_voice_utils import two_phone_call_leave_voice_mail from acts.test_utils.tel.tel_voice_utils import two_phone_call_long_seq from acts.test_utils.tel.tel_voice_utils import two_phone_call_short_seq DEFAULT_LONG_DURATION_CALL_TOTAL_DURATION = 1 * 60 * 60 # default value 1 hour DEFAULT_PING_DURATION = 120 # in seconds CallResult = TelephonyVoiceTestResult.CallResult.Value class TelLiveVoiceTest(TelephonyBaseTest): def setup_class(self): super().setup_class() self.stress_test_number = self.get_stress_test_number() self.long_duration_call_total_duration = self.user_params.get( "long_duration_call_total_duration", DEFAULT_LONG_DURATION_CALL_TOTAL_DURATION) self.number_of_devices = 2 self.tel_logger = TelephonyMetricLogger.for_test_case() """ Tests Begin """ @TelephonyBaseTest.tel_test_wrap @test_tracker_info(uuid="c5009f8c-eb1d-4cd9-85ce-604298bbeb3e") def test_call_to_answering_machine(self): """ Voice call to an answering machine. 1. Make Sure PhoneA attached to voice network. 2. Call from PhoneA to Storyline 3. Verify call is in ACTIVE state 4. Hangup Call from PhoneA Raises: TestFailure if not success. """ ad = self.android_devices[0] if not phone_setup_voice_general(ad.log, ad): ad.log.error("Phone Failed to Set Up Properly for Voice.") return False for iteration in range(3): result = True ad.log.info("Attempt %d", iteration + 1) if not initiate_call(ad.log, ad, STORY_LINE): ad.log.error("Call Failed to Initiate") result = False continue if not wait_for_in_call_active(ad, 60, 3): ad.log.error("Waiting for Call in Active Failed") result = False time.sleep(WAIT_TIME_IN_CALL) if not is_phone_in_call(ad.log, ad): ad.log.error("Call Dropped") result = False if not hangup_call(ad.log, ad): ad.log.error("Call Failed to Hangup") result = False if result: ad.log.info("Call test PASS in iteration %d", iteration + 1) return True time.sleep(WAIT_TIME_ANDROID_STATE_SETTLING) ad.log.info("Call test FAIL in all 3 iterations") return False @TelephonyBaseTest.tel_test_wrap @test_tracker_info(uuid="fca3f9e1-447a-416f-9a9c-50b7161981bf") def test_call_mo_voice_general(self): """ General voice to voice call. 1. Make Sure PhoneA attached to voice network. 2. Make Sure PhoneB attached to voice network. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_voice_general, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq(self.log, ads[0], None, None, ads[1], None, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @TelephonyBaseTest.tel_test_wrap @test_tracker_info(uuid="69faeb84-3830-47c0-ad80-dc657381a83b") def test_call_mt_voice_general(self): """ General voice to voice call. 1. Make Sure PhoneA attached to voice network. 2. Make Sure PhoneB attached to voice network. 3. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 4. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_voice_general, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq(self.log, ads[1], None, None, ads[0], None, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="b2de097b-70e1-4242-b555-c1aa0a5acd8c") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_volte(self): """ VoLTE to VoLTE call test 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in LTE mode (with VoLTE). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_volte, is_phone_in_call_volte, ads[1], phone_idle_volte, is_phone_in_call_volte, None, WAIT_TIME_IN_CALL_FOR_IMS) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="3c7f5a09-0177-4469-9994-cd5e7dd7c7fe") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_volte_7_digit_dialing(self): """ VoLTE to VoLTE call test, dial with 7 digit number 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in LTE mode (with VoLTE). 3. Call from PhoneA to PhoneB by 7-digit phone number, accept on PhoneB. Returns: True if pass; False if fail. """ ads = self.android_devices if ads[0].droid.telephonyGetSimCountryIso() == "ca": raise signals.TestSkip("7 digit dialing not supported") tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False return call_setup_teardown( self.log, ads[0], ads[1], ads[0], is_phone_in_call_volte, is_phone_in_call_volte, WAIT_TIME_IN_CALL_FOR_IMS, dialing_number_length=7) @test_tracker_info(uuid="721ef935-a03c-4d0f-85b9-4753d857162f") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_volte_10_digit_dialing(self): """ VoLTE to VoLTE call test, dial with 10 digit number 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in LTE mode (with VoLTE). 3. Call from PhoneA to PhoneB by 10-digit phone number, accept on PhoneB. Returns: True if pass; False if fail. """ if self.android_devices[0].droid.telephonyGetSimCountryIso() == "ca": raise signals.TestSkip("10 digit dialing not supported") ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False return call_setup_teardown( self.log, ads[0], ads[1], ads[0], is_phone_in_call_volte, is_phone_in_call_volte, WAIT_TIME_IN_CALL_FOR_IMS, dialing_number_length=10) @test_tracker_info(uuid="4fd3aa62-2398-4cee-994e-7fc5cadbcbc1") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_volte_11_digit_dialing(self): """ VoLTE to VoLTE call test, dial with 11 digit number 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in LTE mode (with VoLTE). 3. Call from PhoneA to PhoneB by 11-digit phone number, accept on PhoneB. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False return call_setup_teardown( self.log, ads[0], ads[1], ads[0], is_phone_in_call_volte, is_phone_in_call_volte, WAIT_TIME_IN_CALL_FOR_IMS, dialing_number_length=11) @test_tracker_info(uuid="969abdac-6a57-442a-9c40-48199bd8d556") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_volte_12_digit_dialing(self): """ VoLTE to VoLTE call test, dial with 12 digit number 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in LTE mode (with VoLTE). 3. Call from PhoneA to PhoneB by 12-digit phone number, accept on PhoneB. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False return call_setup_teardown( self.log, ads[0], ads[1], ads[0], is_phone_in_call_volte, is_phone_in_call_volte, WAIT_TIME_IN_CALL_FOR_IMS, dialing_number_length=12) @test_tracker_info(uuid="6b13a03d-c9ff-43d7-9798-adbead7688a4") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_csfb_3g(self): """ VoLTE to CSFB 3G call test 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in LTE mode (without VoLTE). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_volte, is_phone_in_call_volte, ads[1], phone_idle_csfb, is_phone_in_call_csfb, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="38096fdb-324a-4ce0-8836-8bbe713cffc2") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_csfb_for_tmo(self): """ VoLTE to CSFB 3G call test for TMobile 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in LTE mode (without VoLTE, CSFB to WCDMA/GSM). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq(self.log, ads[0], phone_idle_volte, None, ads[1], phone_idle_csfb, is_phone_in_call_csfb, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="82f9515d-a52b-4dec-93a5-997ffdbca76c") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_csfb_1x_long(self): """ VoLTE to CSFB 1x call test 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in LTE mode (without VoLTE, CSFB to 1x). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices # Make Sure PhoneB is CDMA phone. if ads[1].droid.telephonyGetPhoneType() != PHONE_TYPE_CDMA: self.log.error( "PhoneB not cdma phone, can not csfb 1x. Stop test.") self.tel_logger.set_result(CallResult("UNAVAILABLE_NETWORK_TYPE")) raise signals.TestFailure("Failed", extras={"fail_reason": "PhoneB not cdma, cannot csfb 1x."}) tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_long_seq( self.log, ads[0], phone_idle_volte, is_phone_in_call_volte, ads[1], phone_idle_csfb, is_phone_in_call_1x, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="2e57fad6-5eaf-4e7d-8353-8aa6f4c52776") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_csfb_long(self): """ VoLTE to CSFB WCDMA call test 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in LTE mode (without VoLTE, CSFB to WCDMA/GSM). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices # Make Sure PhoneB is GSM phone. if ads[1].droid.telephonyGetPhoneType() != PHONE_TYPE_GSM: self.log.error( "PhoneB not gsm phone, can not csfb wcdma. Stop test.") self.tel_logger.set_result(CallResult("UNAVAILABLE_NETWORK_TYPE")) raise signals.TestFailure("Failed", extras={"fail_reason": "PhoneB not gsm, cannot csfb wcdma."}) tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Setup Properly") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Setup Properly"}) result = two_phone_call_long_seq( self.log, ads[0], phone_idle_volte, is_phone_in_call_volte, ads[1], phone_idle_csfb, is_phone_in_call_csfb, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="4bab759f-7610-4cec-893c-0a8aed95f70c") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_3g(self): """ VoLTE to 3G call test 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in 3G mode. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_voice_3g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_volte, is_phone_in_call_volte, ads[1], phone_idle_3g, is_phone_in_call_3g, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="b394cdc5-d88d-4659-8a26-0e58fde69974") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_3g_1x_long(self): """ VoLTE to 3G 1x call test 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in 3G 1x mode. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices # Make Sure PhoneB is CDMA phone. if ads[1].droid.telephonyGetPhoneType() != PHONE_TYPE_CDMA: self.log.error("PhoneB not cdma phone, can not 3g 1x. Stop test.") self.tel_logger.set_result(CallResult("UNAVAILABLE_NETWORK_TYPE")) raise signals.TestFailure("Failed", extras={"fail_reason": "PhoneB not cdma phone, can not 3g 1x."}) tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_voice_3g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_long_seq( self.log, ads[0], phone_idle_volte, is_phone_in_call_volte, ads[1], phone_idle_3g, is_phone_in_call_1x, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="b39a74a9-2a89-4c0b-ac4e-71ed9317bd75") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_3g_wcdma_long(self): """ VoLTE to 3G WCDMA call test 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in 3G WCDMA mode. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices # Make Sure PhoneB is GSM phone. if ads[1].droid.telephonyGetPhoneType() != PHONE_TYPE_GSM: self.log.error( "PhoneB not gsm phone, can not 3g wcdma. Stop test.") self.tel_logger.set_result(CallResult('UNAVAILABLE_NETWORK_TYPE')) raise signals.TestFailure("Failed", extras={"fail_reason": "PhoneB not gsm phone, can not 3g wcdma."}) tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_voice_3g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "PhoneB not gsm phone, can not 3g wcdma."}) result = two_phone_call_long_seq( self.log, ads[0], phone_idle_volte, is_phone_in_call_volte, ads[1], phone_idle_3g, is_phone_in_call_wcdma, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="573bbcf1-6cbd-4084-9cb7-e14fb6c9521e") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_2g(self): """ VoLTE to 2G call test 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in 2G mode. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_voice_2g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_volte, is_phone_in_call_volte, ads[1], phone_idle_2g, is_phone_in_call_2g, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="63f2a722-8c2f-4cf1-b694-0836256ffb54") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_volte_5g_nsa(self): """ VoLTE to VoLTE call test 1. Make Sure PhoneA is in 5g NSA mode (with VoLTE). 2. Make Sure PhoneB is in 5g NSA mode (with VoLTE). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Verify both PhoneA and PhoneB gets attached back to 5g NSA Raises: TestFailure if not success. """ ads = self.android_devices # LTE attach tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up in VoLTE.") return False # Mode Pref tasks = [(set_preferred_mode_for_5g, [ad]) for ad in self.android_devices] if not multithread_func(self.log, tasks): self.log.error("Failed to set preferred network mode.") return False # Attach 5g tasks = [(is_current_network_5g_nsa, [ad]) for ad in self.android_devices] if not multithread_func(self.log, tasks): self.log.error("Phone not attached on 5G NSA before call.") return False # VoLTE calls result = two_phone_call_short_seq( self.log, ads[0], None, is_phone_in_call_volte, ads[1], None, is_phone_in_call_volte, None, WAIT_TIME_IN_CALL_FOR_IMS) if not result: self.log.error("Failure is VoLTE call during 5G NSA.") return False # Attach 5g tasks = [(is_current_network_5g_nsa, [ad]) for ad in self.android_devices] if not multithread_func(self.log, tasks): self.log.error("Phone not attached on 5G NSA after call end.") return False self.log.info("PASS - VoLTE test over 5G NSA validated") return True @test_tracker_info(uuid="6add9dd3-f90e-4a96-a4e7-469e44b5caed") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_3g_5g_nsa(self): """ VoLTE to 3G call test 1. Make Sure PhoneA is in 5g NSA mode (with VoLTE). 2. Make Sure PhoneB is in 3G mode. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Verify both PhoneA gets attached back to 5g NSA Raises: TestFailure if not success. """ ads = self.android_devices # LTE attach tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_voice_3g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up in VoLTE/3G.") return False # Mode Pref set_preferred_mode_for_5g(ads[0]) # Attach 5g if not is_current_network_5g_nsa(ads[0]): ads[0].log.error("Phone not attached on 5G NSA before call.") return False # VoLTE to 3G result = two_phone_call_short_seq( self.log, ads[0], None, is_phone_in_call_volte, ads[1], None, is_phone_in_call_3g, None, WAIT_TIME_IN_CALL_FOR_IMS) if not result: self.log.error("Failure is VoLTE to 3G call during 5G NSA.") return False # Attach 5g if not is_current_network_5g_nsa(ads[0]): ads[0].log.error("Phone not attached on 5G NSA after call end.") return False self.log.info("PASS - VoLTE to 3G over 5G NSA validated") return True def _call_epdg_to_epdg_wfc(self, ads, apm_mode, wfc_mode, wifi_ssid, wifi_pwd): """ Test epdg<->epdg call functionality. Make Sure PhoneA is set to make epdg call. Make Sure PhoneB is set to make epdg call. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Args: ads: list of android objects, this list should have two ad. apm_mode: phones' airplane mode. if True, phones are in airplane mode during test. if False, phones are not in airplane mode during test. wfc_mode: phones' wfc mode. Valid mode includes: WFC_MODE_WIFI_ONLY, WFC_MODE_CELLULAR_PREFERRED, WFC_MODE_WIFI_PREFERRED, WFC_MODE_DISABLED. wifi_ssid: WiFi ssid to connect during test. wifi_pwd: WiFi password. Returns: True if pass; False if fail. """ tasks = [(phone_setup_iwlan, (self.log, ads[0], apm_mode, wfc_mode, wifi_ssid, wifi_pwd)), (phone_setup_iwlan, (self.log, ads[1], apm_mode, wfc_mode, wifi_ssid, wifi_pwd))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ad_ping = ads[0] call_task = (two_phone_call_short_seq, (self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_iwlan, is_phone_in_call_iwlan, None, WAIT_TIME_IN_CALL_FOR_IMS)) ping_task = (adb_shell_ping, (ad_ping, DEFAULT_PING_DURATION)) results = run_multithread_func(self.log, [ping_task, call_task]) if not results[1]: self.log.error("Call setup failed in active ICMP transfer.") if results[0]: self.log.info("ICMP transfer succeeded with parallel phone call.") else: self.log.error("ICMP transfer failed with parallel phone call.") return all(results) @test_tracker_info(uuid="a4a043c0-f4ba-4405-9262-42c752cc4487") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_wfc_wifi_only(self): """ WiFi Only, WiFi calling to WiFi Calling test 1. Setup PhoneA WFC mode: WIFI_ONLY. 2. Setup PhoneB WFC mode: WIFI_ONLY. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Returns: True if pass; False if fail. """ return self._call_epdg_to_epdg_wfc( self.android_devices, False, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass) @test_tracker_info(uuid="ae171d58-d4c1-43f7-aa93-4860b4b28d53") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_wfc_wifi_preferred(self): """ WiFi Preferred, WiFi calling to WiFi Calling test 1. Setup PhoneA WFC mode: WIFI_PREFERRED. 2. Setup PhoneB WFC mode: WIFI_PREFERRED. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Returns: True if pass; False if fail. """ return self._call_epdg_to_epdg_wfc( self.android_devices, False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass) @test_tracker_info(uuid="ece58857-fedc-49a9-bf10-b76bd78a51f2") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_wfc_cellular_preferred(self): """ Cellular Preferred, WiFi calling to WiFi Calling test 1. Setup PhoneA WFC mode: CELLULAR_PREFERRED. 2. Setup PhoneB WFC mode: CELLULAR_PREFERRED. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = [self.android_devices[0], self.android_devices[1]] tasks = [(phone_setup_iwlan_cellular_preferred, (self.log, ads[0], self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_iwlan_cellular_preferred, (self.log, ads[1], self.wifi_network_ssid, self.wifi_network_pass))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], None, is_phone_in_call_not_iwlan, ads[1], None, is_phone_in_call_not_iwlan, None, WAIT_TIME_IN_CALL_FOR_IMS) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="0d63c250-d9e7-490c-8c48-0a6afbad5f88") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_apm_wfc_wifi_only(self): """ Airplane + WiFi Only, WiFi calling to WiFi Calling test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_ONLY. 2. Setup PhoneB in airplane mode, WFC mode: WIFI_ONLY. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Returns: True if pass; False if fail. """ return self._call_epdg_to_epdg_wfc( self.android_devices, True, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass) @test_tracker_info(uuid="7678e4ee-29c6-4319-93ab-d555501d1876") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_apm_wfc_wifi_preferred(self): """ Airplane + WiFi Preferred, WiFi calling to WiFi Calling test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_PREFERRED. 2. Setup PhoneB in airplane mode, WFC mode: WIFI_PREFERRED. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Returns: True if pass; False if fail. """ return self._call_epdg_to_epdg_wfc( self.android_devices, True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass) @test_tracker_info(uuid="8f5c637e-683a-448d-9443-b2b39626ab19") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_apm_wfc_cellular_preferred(self): """ Airplane + Cellular Preferred, WiFi calling to WiFi Calling test 1. Setup PhoneA in airplane mode, WFC mode: CELLULAR_PREFERRED. 2. Setup PhoneB in airplane mode, WFC mode: CELLULAR_PREFERRED. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Returns: True if pass; False if fail. """ return self._call_epdg_to_epdg_wfc( self.android_devices, True, WFC_MODE_CELLULAR_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass) @test_tracker_info(uuid="0b51666e-c83c-40b5-ba0f-737e64bc82a2") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_volte_wfc_wifi_only(self): """ WiFi Only, WiFi calling to VoLTE test 1. Setup PhoneA WFC mode: WIFI_ONLY. 2. Make Sure PhoneB is in LTE mode (with VoLTE enabled). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_volte, is_phone_in_call_volte, None, WAIT_TIME_IN_CALL_FOR_IMS) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="6e0630a9-63b2-4ea1-8ec9-6560f001905c") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_volte_wfc_wifi_preferred(self): """ WiFi Preferred, WiFi calling to VoLTE test 1. Setup PhoneA WFC mode: WIFI_PREFERRED. 2. Make Sure PhoneB is in LTE mode (with VoLTE enabled). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_volte, is_phone_in_call_volte, None, WAIT_TIME_IN_CALL_FOR_IMS) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="51077985-2229-491f-9a54-1ff53871758c") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_volte_apm_wfc_wifi_only(self): """ Airplane + WiFi Only, WiFi calling to VoLTE test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_ONLY. 2. Make Sure PhoneB is in LTE mode (with VoLTE enabled). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_volte, is_phone_in_call_volte, None, WAIT_TIME_IN_CALL_FOR_IMS) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="fff9edcd-1ace-4f2d-a09b-06f3eea56cca") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_volte_apm_wfc_wifi_preferred(self): """ Airplane + WiFi Preferred, WiFi calling to VoLTE test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_PREFERRED. 2. Make Sure PhoneB is in LTE mode (with VoLTE enabled). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_volte, is_phone_in_call_volte, None, WAIT_TIME_IN_CALL_FOR_IMS) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="8591554e-4e38-406c-97bf-8921d5329c47") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_csfb_3g_wfc_wifi_only(self): """ WiFi Only, WiFi calling to CSFB 3G test 1. Setup PhoneA WFC mode: WIFI_ONLY. 2. Make Sure PhoneB is in LTE mode (with VoLTE disabled). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_csfb, is_phone_in_call_csfb, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="9711888d-5b1e-4d05-86e9-98f94f46098b") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_csfb_3g_wfc_wifi_preferred(self): """ WiFi Preferred, WiFi calling to CSFB 3G test 1. Setup PhoneA WFC mode: WIFI_PREFERRED. 2. Make Sure PhoneB is in LTE mode (with VoLTE disabled). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_csfb, is_phone_in_call_csfb, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="902c96a4-858f-43ff-bd56-6d7d27004320") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_csfb_3g_apm_wfc_wifi_only(self): """ Airplane + WiFi Only, WiFi calling to CSFB 3G test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_ONLY. 2. Make Sure PhoneB is in LTE mode (with VoLTE disabled). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_csfb, is_phone_in_call_csfb, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="362a5396-ebda-4706-a73a-d805e5028fd7") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_csfb_3g_apm_wfc_wifi_preferred(self): """ Airplane + WiFi Preferred, WiFi calling to CSFB 3G test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_PREFERRED. 2. Make Sure PhoneB is in LTE mode (with VoLTE disabled). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_csfb, is_phone_in_call_csfb, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="647bb859-46bc-4e3e-b6ab-7944d3bbcc26") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_3g_wfc_wifi_only(self): """ WiFi Only, WiFi calling to 3G test 1. Setup PhoneA WFC mode: WIFI_ONLY. 2. Make Sure PhoneB is in 3G mode. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_3g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_3g, is_phone_in_call_3g, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="3688ea1f-a52d-4a35-9df4-d5ed0985e49b") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_3g_wfc_wifi_preferred(self): """ WiFi Preferred, WiFi calling to 3G test 1. Setup PhoneA WFC mode: WIFI_PREFERRED. 2. Make Sure PhoneB is in 3G mode. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_3g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_3g, is_phone_in_call_3g, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="f4efc821-fbaf-4ec2-b89b-5a47354344f0") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_3g_apm_wfc_wifi_only(self): """ Airplane + WiFi Only, WiFi calling to 3G test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_ONLY. 2. Make Sure PhoneB is in 3G mode. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_3g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_3g, is_phone_in_call_3g, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="2b1345b7-3b62-44bd-91ad-9c5a4925b0e1") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_3g_apm_wfc_wifi_preferred(self): """ Airplane + WiFi Preferred, WiFi calling to 3G test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_PREFERRED. 2. Make Sure PhoneB is in 3G mode. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_3g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_3g, is_phone_in_call_3g, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="7b3fea22-114a-442e-aa12-dde3b6001681") @TelephonyBaseTest.tel_test_wrap def test_call_csfb_3g_to_csfb_3g(self): """ CSFB 3G to CSFB 3G call test 1. Make Sure PhoneA is in LTE mode, VoLTE disabled. 2. Make Sure PhoneB is in LTE mode, VoLTE disabled. 3. Call from PhoneA to PhoneB, accept on PhoneA, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneA, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_csfb, (self.log, ads[0])), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_csfb, is_phone_in_call_csfb, ads[1], phone_idle_csfb, is_phone_in_call_csfb, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="91d751ea-40c8-4ffc-b9d3-03d0ad0902bd") @TelephonyBaseTest.tel_test_wrap def test_call_3g_to_3g(self): """ 3G to 3G call test 1. Make Sure PhoneA is in 3G mode. 2. Make Sure PhoneB is in 3G mode. 3. Call from PhoneA to PhoneB, accept on PhoneA, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneA, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_voice_3g, (self.log, ads[0])), (phone_setup_voice_3g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_3g, is_phone_in_call_3g, ads[1], phone_idle_3g, is_phone_in_call_3g, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="df57c481-010a-4d21-a5c1-5116917871b2") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_volte_long(self): """ VoLTE to VoLTE call test 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in LTE mode (with VoLTE). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_long_seq( self.log, ads[0], phone_idle_volte, is_phone_in_call_volte, ads[1], phone_idle_volte, is_phone_in_call_volte, None, WAIT_TIME_IN_CALL_FOR_IMS) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="b0712d8a-71cf-405f-910c-8592da082660") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_long_wfc_wifi_only(self): """ WiFi Only, WiFi calling to WiFi Calling test 1. Setup PhoneA WFC mode: WIFI_ONLY. 2. Setup PhoneB WFC mode: WIFI_ONLY. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_iwlan, (self.log, ads[1], False, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_long_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_iwlan, is_phone_in_call_iwlan, None, WAIT_TIME_IN_CALL_FOR_IMS) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="a7293d6c-0fdb-4842-984a-e4c6395fd41d") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_long_wfc_wifi_preferred(self): """ WiFi Preferred, WiFi calling to WiFi Calling test 1. Setup PhoneA WFC mode: WIFI_PREFERRED. 2. Setup PhoneB WFC mode: WIFI_PREFERRED. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_iwlan, (self.log, ads[1], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_long_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_iwlan, is_phone_in_call_iwlan, None, WAIT_TIME_IN_CALL_FOR_IMS) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="029af2a7-aba4-406b-9095-b32da57a7cdb") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_long_apm_wfc_wifi_only(self): """ Airplane + WiFi Only, WiFi calling to WiFi Calling test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_ONLY. 2. Setup PhoneB in airplane mode, WFC mode: WIFI_ONLY. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_iwlan, (self.log, ads[1], True, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_long_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_iwlan, is_phone_in_call_iwlan, None, WAIT_TIME_IN_CALL_FOR_IMS) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="3c751d79-7159-4407-a63c-96f835dd6cb0") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_long_apm_wfc_wifi_preferred(self): """ Airplane + WiFi Preferred, WiFi calling to WiFi Calling test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_PREFERRED. 2. Setup PhoneB in airplane mode, WFC mode: WIFI_PREFERRED. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_iwlan, (self.log, ads[1], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_long_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_iwlan, is_phone_in_call_iwlan, None, WAIT_TIME_IN_CALL_FOR_IMS) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="9deab765-e2da-4826-bae8-ba8755551a1b") @TelephonyBaseTest.tel_test_wrap def test_call_csfb_3g_to_csfb_3g_long(self): """ CSFB 3G to CSFB 3G call test 1. Make Sure PhoneA is in LTE mode, VoLTE disabled. 2. Make Sure PhoneB is in LTE mode, VoLTE disabled. 3. Call from PhoneA to PhoneB, accept on PhoneA, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneA, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_csfb, (self.log, ads[0])), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_long_seq( self.log, ads[0], phone_idle_csfb, is_phone_in_call_csfb, ads[1], phone_idle_csfb, is_phone_in_call_csfb, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="54768178-818f-4126-9e50-4f49e43a6fd3") @TelephonyBaseTest.tel_test_wrap def test_call_3g_to_3g_long(self): """ 3G to 3G call test 1. Make Sure PhoneA is in 3G mode. 2. Make Sure PhoneB is in 3G mode. 3. Call from PhoneA to PhoneB, accept on PhoneA, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneA, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_voice_3g, (self.log, ads[0])), (phone_setup_voice_3g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_long_seq( self.log, ads[0], phone_idle_3g, is_phone_in_call_3g, ads[1], phone_idle_3g, is_phone_in_call_3g, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="") @TelephonyBaseTest.tel_test_wrap def test_call_volte_to_volte_loop(self): """ Stress test: VoLTE to VoLTE call test 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is in LTE mode (with VoLTE). 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. 7. Repeat step 3~6. Returns: True if pass; False if fail. """ # TODO: b/26338422 Make this a parameter MINIMUM_SUCCESS_RATE = .95 ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False success_count = 0 fail_count = 0 for i in range(1, self.stress_test_number + 1): if two_phone_call_long_seq( self.log, ads[0], phone_idle_volte, is_phone_in_call_volte, ads[1], phone_idle_volte, is_phone_in_call_volte, None, WAIT_TIME_IN_CALL_FOR_IMS): success_count += 1 result_str = "Succeeded" else: fail_count += 1 result_str = "Failed" self.log.info("Iteration %s %s. Current: %s / %s passed.", i, result_str, success_count, self.stress_test_number) self.log.info("Final Count - Success: %s, Failure: %s - %s%", success_count, fail_count, str(100 * success_count / (success_count + fail_count))) if success_count / ( success_count + fail_count) >= MINIMUM_SUCCESS_RATE: return True else: return False @test_tracker_info(uuid="dfa2c1a7-0e9a-42f2-b3ba-7e196df87e1b") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_loop_wfc_wifi_only(self): """ Stress test: WiFi Only, WiFi calling to WiFi Calling test 1. Setup PhoneA WFC mode: WIFI_ONLY. 2. Setup PhoneB WFC mode: WIFI_ONLY. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. 7. Repeat step 3~6. Returns: True if pass; False if fail. """ # TODO: b/26338422 Make this a parameter MINIMUM_SUCCESS_RATE = .95 ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_iwlan, (self.log, ads[1], False, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False success_count = 0 fail_count = 0 for i in range(1, self.stress_test_number + 1): if two_phone_call_long_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_iwlan, is_phone_in_call_iwlan, None, WAIT_TIME_IN_CALL_FOR_IMS): success_count += 1 result_str = "Succeeded" else: fail_count += 1 result_str = "Failed" self.log.info("Iteration %s %s. Current: %s / %s passed.", i, result_str, success_count, self.stress_test_number) self.log.info("Final Count - Success: %s, Failure: %s - %s%", success_count, fail_count, str(100 * success_count / (success_count + fail_count))) if success_count / ( success_count + fail_count) >= MINIMUM_SUCCESS_RATE: return True else: return False @test_tracker_info(uuid="382f97ad-65d4-4ebb-a31b-aa243e01bce4") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_loop_wfc_wifi_preferred(self): """ Stress test: WiFi Preferred, WiFi Calling to WiFi Calling test 1. Setup PhoneA WFC mode: WIFI_PREFERRED. 2. Setup PhoneB WFC mode: WIFI_PREFERRED. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. 7. Repeat step 3~6. Returns: True if pass; False if fail. """ # TODO: b/26338422 Make this a parameter MINIMUM_SUCCESS_RATE = .95 ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_iwlan, (self.log, ads[1], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False success_count = 0 fail_count = 0 for i in range(1, self.stress_test_number + 1): if two_phone_call_long_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_iwlan, is_phone_in_call_iwlan, None, WAIT_TIME_IN_CALL_FOR_IMS): success_count += 1 result_str = "Succeeded" else: fail_count += 1 result_str = "Failed" self.log.info("Iteration %s %s. Current: %s / %s passed.", i, result_str, success_count, self.stress_test_number) self.log.info("Final Count - Success: %s, Failure: %s - %s%", success_count, fail_count, str(100 * success_count / (success_count + fail_count))) if success_count / ( success_count + fail_count) >= MINIMUM_SUCCESS_RATE: return True else: return False @test_tracker_info(uuid="c820e2ea-8a14-421c-b608-9074b716f7dd") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_loop_apm_wfc_wifi_only(self): """ Stress test: Airplane + WiFi Only, WiFi Calling to WiFi Calling test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_ONLY. 2. Setup PhoneB in airplane mode, WFC mode: WIFI_ONLY. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. 7. Repeat step 3~6. Returns: True if pass; False if fail. """ # TODO: b/26338422 Make this a parameter MINIMUM_SUCCESS_RATE = .95 ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_iwlan, (self.log, ads[1], True, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False success_count = 0 fail_count = 0 for i in range(1, self.stress_test_number + 1): if two_phone_call_long_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_iwlan, is_phone_in_call_iwlan, None, WAIT_TIME_IN_CALL_FOR_IMS): success_count += 1 result_str = "Succeeded" else: fail_count += 1 result_str = "Failed" self.log.info("Iteration %s %s. Current: %s / %s passed.", i, result_str, success_count, self.stress_test_number) self.log.info("Final Count - Success: %s, Failure: %s - %s%", success_count, fail_count, str(100 * success_count / (success_count + fail_count))) if success_count / ( success_count + fail_count) >= MINIMUM_SUCCESS_RATE: return True else: return False @test_tracker_info(uuid="3b8cb344-1551-4244-845d-b864501f2fb4") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_to_epdg_loop_apm_wfc_wifi_preferred(self): """ Stress test: Airplane + WiFi Preferred, WiFi Calling to WiFi Calling test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_PREFERRED. 2. Setup PhoneB in airplane mode, WFC mode: WIFI_PREFERRED. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. 7. Repeat step 3~6. Returns: True if pass; False if fail. """ # TODO: b/26338422 Make this a parameter MINIMUM_SUCCESS_RATE = .95 ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_iwlan, (self.log, ads[1], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False success_count = 0 fail_count = 0 for i in range(1, self.stress_test_number + 1): if two_phone_call_long_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_iwlan, is_phone_in_call_iwlan, None, WAIT_TIME_IN_CALL_FOR_IMS): success_count += 1 result_str = "Succeeded" else: fail_count += 1 result_str = "Failed" self.log.info("Iteration %s %s. Current: %s / %s passed.", i, result_str, success_count, self.stress_test_number) self.log.info("Final Count - Success: %s, Failure: %s - %s%", success_count, fail_count, str(100 * success_count / (success_count + fail_count))) if success_count / ( success_count + fail_count) >= MINIMUM_SUCCESS_RATE: return True else: return False @test_tracker_info(uuid="") @TelephonyBaseTest.tel_test_wrap def test_call_csfb_3g_to_csfb_3g_loop(self): """ Stress test: CSFB 3G to CSFB 3G call test 1. Make Sure PhoneA is in LTE mode, VoLTE disabled. 2. Make Sure PhoneB is in LTE mode, VoLTE disabled. 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. 7. Repeat step 3~6. Returns: True if pass; False if fail. """ # TODO: b/26338422 Make this a parameter MINIMUM_SUCCESS_RATE = .95 ads = self.android_devices tasks = [(phone_setup_csfb, (self.log, ads[0])), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False success_count = 0 fail_count = 0 for i in range(1, self.stress_test_number + 1): if two_phone_call_long_seq( self.log, ads[0], phone_idle_csfb, is_phone_in_call_csfb, ads[1], phone_idle_csfb, is_phone_in_call_csfb, None): success_count += 1 result_str = "Succeeded" else: fail_count += 1 result_str = "Failed" self.log.info("Iteration %s %s. Current: %s / %s passed.", i, result_str, success_count, self.stress_test_number) self.log.info("Final Count - Success: %s, Failure: %s", success_count, fail_count) if success_count / ( success_count + fail_count) >= MINIMUM_SUCCESS_RATE: return True else: return False @test_tracker_info(uuid="") @TelephonyBaseTest.tel_test_wrap def test_call_3g_to_3g_loop(self): """ Stress test: 3G to 3G call test 1. Make Sure PhoneA is in 3G mode 2. Make Sure PhoneB is in 3G mode 3. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. 5. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. 6. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. 7. Repeat step 3~6. Returns: True if pass; False if fail. """ # TODO: b/26338422 Make this a parameter MINIMUM_SUCCESS_RATE = .95 ads = self.android_devices tasks = [(phone_setup_voice_3g, (self.log, ads[0])), (phone_setup_voice_3g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False success_count = 0 fail_count = 0 for i in range(1, self.stress_test_number + 1): if two_phone_call_long_seq( self.log, ads[0], phone_idle_3g, is_phone_in_call_3g, ads[1], phone_idle_3g, is_phone_in_call_3g, None): success_count += 1 result_str = "Succeeded" else: fail_count += 1 result_str = "Failed" self.log.info("Iteration %s %s. Current: %s / %s passed.", i, result_str, success_count, self.stress_test_number) self.log.info("Final Count - Success: %s, Failure: %s", success_count, fail_count) if success_count / ( success_count + fail_count) >= MINIMUM_SUCCESS_RATE: return True else: return False def _hold_unhold_test(self, ads): """ Test hold/unhold functionality. PhoneA is in call with PhoneB. The call on PhoneA is active. Get call list on PhoneA. Hold call_id on PhoneA. Check call_id state. Unhold call_id on PhoneA. Check call_id state. Args: ads: List of android objects. This list should contain 2 android objects. ads[0] is the ad to do hold/unhold operation. Returns: True if pass; False if fail. """ call_list = ads[0].droid.telecomCallGetCallIds() ads[0].log.info("Calls in PhoneA %s", call_list) if num_active_calls(ads[0].log, ads[0]) != 1: return False call_id = call_list[0] if ads[0].droid.telecomCallGetCallState(call_id) != CALL_STATE_ACTIVE: ads[0].log.error("Call_id:%s, state:%s, expected: STATE_ACTIVE", call_id, ads[0].droid.telecomCallGetCallState(call_id)) return False # TODO: b/26296375 add voice check. ads[0].log.info("Hold call_id %s on PhoneA", call_id) ads[0].droid.telecomCallHold(call_id) time.sleep(WAIT_TIME_IN_CALL) if ads[0].droid.telecomCallGetCallState(call_id) != CALL_STATE_HOLDING: ads[0].log.error("Call_id:%s, state:%s, expected: STATE_HOLDING", call_id, ads[0].droid.telecomCallGetCallState(call_id)) return False # TODO: b/26296375 add voice check. ads[0].log.info("Unhold call_id %s on PhoneA", call_id) ads[0].droid.telecomCallUnhold(call_id) time.sleep(WAIT_TIME_IN_CALL) if ads[0].droid.telecomCallGetCallState(call_id) != CALL_STATE_ACTIVE: ads[0].log.error("Call_id:%s, state:%s, expected: STATE_ACTIVE", call_id, ads[0].droid.telecomCallGetCallState(call_id)) return False # TODO: b/26296375 add voice check. if not verify_incall_state(self.log, [ads[0], ads[1]], True): self.log.error("Caller/Callee dropped call.") return False return True @test_tracker_info(uuid="4043c68a-c5d4-4e1d-9010-ef65b205cab1") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_mo_hold_unhold_wfc_wifi_only(self): """ WiFi Only, WiFi calling MO call hold/unhold test 1. Setup PhoneA WFC mode: WIFI_ONLY. 2. Make sure PhoneB can make/receive voice call. 3. Call from PhoneA to PhoneB, accept on PhoneB. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MO Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[0], ads[1], ad_hangup=None, verify_caller_func=is_phone_in_call_iwlan, verify_callee_func=None): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info(uuid="0667535e-dcad-49f0-9b4b-fa45d6c75f5b") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_mo_hold_unhold_wfc_wifi_preferred(self): """ WiFi Preferred, WiFi calling MO call hold/unhold test 1. Setup PhoneA WFC mode: WIFI_PREFERRED. 2. Make sure PhoneB can make/receive voice call. 3. Call from PhoneA to PhoneB, accept on PhoneB. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MO Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[0], ads[1], ad_hangup=None, verify_caller_func=is_phone_in_call_iwlan, verify_callee_func=None): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info(uuid="cf318b4c-c920-4e80-b73f-2f092c03a144") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_mo_hold_unhold_apm_wfc_wifi_only(self): """ Airplane + WiFi Only, WiFi calling MO call hold/unhold test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_ONLY. 2. Make sure PhoneB can make/receive voice call. 3. Call from PhoneA to PhoneB, accept on PhoneB. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MO Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[0], ads[1], ad_hangup=None, verify_caller_func=is_phone_in_call_iwlan, verify_callee_func=None): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info(uuid="ace36801-1e7b-4f06-aa0b-17affc8df069") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_mo_hold_unhold_apm_wfc_wifi_preferred(self): """ Airplane + WiFi Preferred, WiFi calling MO call hold/unhold test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_PREFERRED. 2. Make sure PhoneB can make/receive voice call. 3. Call from PhoneA to PhoneB, accept on PhoneB. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MO Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[0], ads[1], ad_hangup=None, verify_caller_func=is_phone_in_call_iwlan, verify_callee_func=None): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info(uuid="2ad32874-0d39-4475-8ae3-d6dccda675f5") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_mt_hold_unhold_wfc_wifi_only(self): """ WiFi Only, WiFi calling MT call hold/unhold test 1. Setup PhoneA WFC mode: WIFI_ONLY. 2. Make sure PhoneB can make/receive voice call. 3. Call from PhoneB to PhoneA, accept on PhoneA. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MT Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[1], ads[0], ad_hangup=None, verify_caller_func=None, verify_callee_func=is_phone_in_call_iwlan): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info(uuid="3efd5d59-30ee-45f5-8966-56ce8fadf9a1") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_mt_hold_unhold_wfc_wifi_preferred(self): """ WiFi Preferred, WiFi calling MT call hold/unhold test 1. Setup PhoneA WFC mode: WIFI_PREFERRED. 2. Make sure PhoneB can make/receive voice call. 3. Call from PhoneB to PhoneA, accept on PhoneA. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MT Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[1], ads[0], ad_hangup=None, verify_caller_func=None, verify_callee_func=is_phone_in_call_iwlan): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False return True @test_tracker_info(uuid="35ed0f89-7435-4d3b-9ebc-c5cdc3f7e32b") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_mt_hold_unhold_apm_wfc_wifi_only(self): """ Airplane + WiFi Only, WiFi calling MT call hold/unhold test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_ONLY. 2. Make sure PhoneB can make/receive voice call. 3. Call from PhoneB to PhoneA, accept on PhoneA. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_ONLY, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MT Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[1], ads[0], ad_hangup=None, verify_caller_func=None, verify_callee_func=is_phone_in_call_iwlan): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info("37ad003b-6426-42f7-b528-ec7c1842fd18") @TelephonyBaseTest.tel_test_wrap def test_call_epdg_mt_hold_unhold_apm_wfc_wifi_preferred(self): """ Airplane + WiFi Preferred, WiFi calling MT call hold/unhold test 1. Setup PhoneA in airplane mode, WFC mode: WIFI_PREFERRED. 2. Make sure PhoneB can make/receive voice call. 3. Call from PhoneB to PhoneA, accept on PhoneA. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MT Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[1], ads[0], ad_hangup=None, verify_caller_func=None, verify_callee_func=is_phone_in_call_iwlan): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info(uuid="fa37cd37-c30a-4caa-80b4-52507995ec77") @TelephonyBaseTest.tel_test_wrap def test_call_volte_mo_hold_unhold(self): """ VoLTE MO call hold/unhold test 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is able to make/receive call. 3. Call from PhoneA to PhoneB, accept on PhoneB. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MO Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[0], ads[1], ad_hangup=None, verify_caller_func=is_phone_in_call_volte, verify_callee_func=None): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info(uuid="28a9acb3-83e8-4dd1-82bf-173da8bd2eca") @TelephonyBaseTest.tel_test_wrap def test_call_volte_mt_hold_unhold(self): """ VoLTE MT call hold/unhold test 1. Make Sure PhoneA is in LTE mode (with VoLTE). 2. Make Sure PhoneB is able to make/receive call. 3. Call from PhoneB to PhoneA, accept on PhoneA. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MT Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[1], ads[0], ad_hangup=None, verify_caller_func=None, verify_callee_func=is_phone_in_call_volte): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info(uuid="ffe724ae-4223-4c15-9fed-9aba17de9a63") @TelephonyBaseTest.tel_test_wrap def test_call_wcdma_mo_hold_unhold(self): """ MO WCDMA hold/unhold test 1. Make Sure PhoneA is in 3G WCDMA mode. 2. Make Sure PhoneB is able to make/receive call. 3. Call from PhoneA to PhoneB, accept on PhoneB. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices # make sure PhoneA is GSM phone before proceed. if (ads[0].droid.telephonyGetPhoneType() != PHONE_TYPE_GSM): ads[0].log.error( "Not GSM phone, abort this wcdma hold/unhold test.") raise signals.TestSkip( "Not GSM phone, abort this wcdma hold/unhold test") tasks = [(phone_setup_voice_3g, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MO Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[0], ads[1], ad_hangup=None, verify_caller_func=is_phone_in_call_3g, verify_callee_func=None): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info(uuid="23805165-01ce-4351-83d3-73c9fb3bda76") @TelephonyBaseTest.tel_test_wrap def test_call_wcdma_mt_hold_unhold(self): """ MT WCDMA hold/unhold test 1. Make Sure PhoneA is in 3G WCDMA mode. 2. Make Sure PhoneB is able to make/receive call. 3. Call from PhoneB to PhoneA, accept on PhoneA. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices # make sure PhoneA is GSM phone before proceed. if (ads[0].droid.telephonyGetPhoneType() != PHONE_TYPE_GSM): ads[0].log.error( "Not GSM phone, abort this wcdma hold/unhold test.") raise signals.TestSkip( "Not GSM phone, abort this wcdma hold/unhold test") tasks = [(phone_setup_voice_3g, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MT Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[1], ads[0], ad_hangup=None, verify_caller_func=None, verify_callee_func=is_phone_in_call_3g): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info(uuid="08c846c7-1978-4ece-8f2c-731129947699") @TelephonyBaseTest.tel_test_wrap def test_call_csfb_mo_hold_unhold(self): """ MO CSFB WCDMA/GSM hold/unhold test 1. Make Sure PhoneA is in LTE mode (VoLTE disabled). 2. Make Sure PhoneB is able to make/receive call. 3. Call from PhoneA to PhoneB, accept on PhoneB. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices # make sure PhoneA is GSM phone before proceed. if (ads[0].droid.telephonyGetPhoneType() != PHONE_TYPE_GSM): self.log.error("Not GSM phone, abort this wcdma hold/unhold test.") raise signals.TestSkip( "Not GSM phone, abort this wcdma hold/unhold test") tasks = [(phone_setup_csfb, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MO Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[0], ads[1], ad_hangup=None, verify_caller_func=is_phone_in_call_csfb, verify_callee_func=None): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info(uuid="a6405fe6-c732-4ae6-bbae-e912a124f4a2") @TelephonyBaseTest.tel_test_wrap def test_call_csfb_mt_hold_unhold(self): """ MT CSFB WCDMA/GSM hold/unhold test 1. Make Sure PhoneA is in LTE mode (VoLTE disabled). 2. Make Sure PhoneB is able to make/receive call. 3. Call from PhoneB to PhoneA, accept on PhoneA. 4. Hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices # make sure PhoneA is GSM phone before proceed. if (ads[0].droid.telephonyGetPhoneType() != PHONE_TYPE_GSM): ads[0].log.error( "Not GSM phone, abort this wcdma hold/unhold test.") raise signals.TestSkip( "Not GSM phone, abort this wcdma hold/unhold test") tasks = [(phone_setup_csfb, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MT Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[1], ads[0], ad_hangup=None, verify_caller_func=None, verify_callee_func=is_phone_in_call_csfb): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False if not hangup_call(self.log, ads[0]): self.log.error("Call Hangup Failed") return False return True @test_tracker_info(uuid="5edc5034-90ef-4113-926f-05407ed60a87") @TelephonyBaseTest.tel_test_wrap def test_erase_all_pending_voicemail(self): """Script for TMO/ATT/SPT phone to erase all pending voice mail. This script only works if phone have already set up voice mail options, and phone should disable password protection for voice mail. 1. If phone don't have pending voice message, return True. 2. Dial voice mail number. For TMO, the number is '123'. For ATT, the number is phone's number. For SPT, the number is phone's number. 3. Use DTMF to delete all pending voice messages. 4. Check telephonyGetVoiceMailCount result. it should be 0. Returns: False if error happens. True is succeed. """ ads = self.android_devices tasks = [(phone_setup_voice_general, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False return call_voicemail_erase_all_pending_voicemail( self.log, self.android_devices[0]) @test_tracker_info(uuid="c81156a2-089b-4b10-ba80-7afea61d06c6") @TelephonyBaseTest.tel_test_wrap def test_voicemail_indicator_volte(self): """Test Voice Mail notification in LTE (VoLTE enabled). This script currently only works for TMO now. 1. Make sure DUT (ads[0]) in VoLTE mode. Both PhoneB (ads[0]) and DUT idle. 2. Make call from PhoneB to DUT, reject on DUT. 3. On PhoneB, leave a voice mail to DUT. 4. Verify DUT receive voice mail notification. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_voice_general, (self.log, ads[1])), (phone_setup_volte, (self.log, ads[0]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False if not call_voicemail_erase_all_pending_voicemail(self.log, ads[0]): self.log.error("Failed to clear voice mail.") return False return two_phone_call_leave_voice_mail(self.log, ads[1], None, None, ads[0], phone_idle_volte) @test_tracker_info(uuid="529e12cb-3178-4d2c-b155-d5cfb1eac0c9") @TelephonyBaseTest.tel_test_wrap def test_voicemail_indicator_lte(self): """Test Voice Mail notification in LTE (VoLTE disabled). This script currently only works for TMO/ATT/SPT now. 1. Make sure DUT (ads[1]) in LTE (No VoLTE) mode. Both PhoneB (ads[0]) and DUT idle. 2. Make call from PhoneB to DUT, reject on DUT. 3. On PhoneB, leave a voice mail to DUT. 4. Verify DUT receive voice mail notification. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_voice_general, (self.log, ads[0])), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False if not call_voicemail_erase_all_pending_voicemail(self.log, ads[0]): self.log.error("Failed to clear voice mail.") return False return two_phone_call_leave_voice_mail(self.log, ads[0], None, None, ads[1], phone_idle_csfb) @test_tracker_info(uuid="60cef7dd-f990-4913-af9a-75e9336fc80a") @TelephonyBaseTest.tel_test_wrap def test_voicemail_indicator_3g(self): """Test Voice Mail notification in 3G This script currently only works for TMO/ATT/SPT now. 1. Make sure DUT (ads[0]) in 3G mode. Both PhoneB and DUT idle. 2. Make call from PhoneB to DUT, reject on DUT. 3. On PhoneB, leave a voice mail to DUT. 4. Verify DUT receive voice mail notification. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_voice_3g, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False if not call_voicemail_erase_all_pending_voicemail(self.log, ads[0]): self.log.error("Failed to clear voice mail.") return False return two_phone_call_leave_voice_mail(self.log, ads[1], None, None, ads[0], phone_idle_3g) @test_tracker_info(uuid="e4c83cfa-db60-4258-ab69-15f7de3614b0") @TelephonyBaseTest.tel_test_wrap def test_voicemail_indicator_2g(self): """Test Voice Mail notification in 2G This script currently only works for TMO/ATT/SPT now. 1. Make sure DUT (ads[0]) in 2G mode. Both PhoneB (ads[1]) and DUT idle. 2. Make call from PhoneB to DUT, reject on DUT. 3. On PhoneB, leave a voice mail to DUT. 4. Verify DUT receive voice mail notification. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_voice_general, (self.log, ads[1])), (phone_setup_voice_2g, (self.log, ads[0]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False if not call_voicemail_erase_all_pending_voicemail(self.log, ads[0]): self.log.error("Failed to clear voice mail.") return False return two_phone_call_leave_voice_mail(self.log, ads[1], None, None, ads[0], phone_idle_2g) @test_tracker_info(uuid="f0cb02fb-a028-43da-9c87-5b21b2f8549b") @TelephonyBaseTest.tel_test_wrap def test_voicemail_indicator_iwlan(self): """Test Voice Mail notification in WiFI Calling This script currently only works for TMO now. 1. Make sure DUT (ads[0]) in WFC mode. Both PhoneB (ads[1]) and DUT idle. 2. Make call from PhoneB to DUT, reject on DUT. 3. On PhoneB, leave a voice mail to DUT. 4. Verify DUT receive voice mail notification. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_voice_general, (self.log, ads[1])), (phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False if not call_voicemail_erase_all_pending_voicemail(self.log, ads[0]): self.log.error("Failed to clear voice mail.") return False return two_phone_call_leave_voice_mail(self.log, ads[1], None, None, ads[0], phone_idle_iwlan) @test_tracker_info(uuid="9bd0550e-abfd-436b-912f-571810f973d7") @TelephonyBaseTest.tel_test_wrap def test_voicemail_indicator_apm_iwlan(self): """Test Voice Mail notification in WiFI Calling This script currently only works for TMO now. 1. Make sure DUT (ads[0]) in APM WFC mode. Both PhoneB (ads[1]) and DUT idle. 2. Make call from PhoneB to DUT, reject on DUT. 3. On PhoneB, leave a voice mail to DUT. 4. Verify DUT receive voice mail notification. Returns: True if pass; False if fail. """ ads = self.android_devices tasks = [(phone_setup_voice_general, (self.log, ads[1])), (phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False if not call_voicemail_erase_all_pending_voicemail(self.log, ads[0]): self.log.error("Failed to clear voice mail.") return False return two_phone_call_leave_voice_mail(self.log, ads[1], None, None, ads[0], phone_idle_iwlan) @test_tracker_info(uuid="6bd5cf0f-522e-4e4a-99bf-92ae46261d8c") @TelephonyBaseTest.tel_test_wrap def test_call_2g_to_2g(self): """ Test 2g<->2g call functionality. Make Sure PhoneA is in 2g mode. Make Sure PhoneB is in 2g mode. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_voice_2g, (self.log, ads[0])), (phone_setup_voice_2g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_2g, is_phone_in_call_2g, ads[1], phone_idle_2g, is_phone_in_call_2g, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="947f3178-735b-4ac2-877c-a06a94972457") @TelephonyBaseTest.tel_test_wrap def test_call_2g_to_2g_long(self): """ Test 2g<->2g call functionality. Make Sure PhoneA is in 2g mode. Make Sure PhoneB is in 2g mode. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneB. Call from PhoneB to PhoneA, accept on PhoneA, hang up on PhoneA. Raises: TestFailure if not success. """ ads = self.android_devices tasks = [(phone_setup_voice_2g, (self.log, ads[0])), (phone_setup_voice_2g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_long_seq( self.log, ads[0], phone_idle_2g, is_phone_in_call_2g, ads[1], phone_idle_2g, is_phone_in_call_2g, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) @test_tracker_info(uuid="d109df55-ac2f-493f-9324-9be1d3d7d6d3") @TelephonyBaseTest.tel_test_wrap def test_call_gsm_mo_hold_unhold(self): """ Test GSM call hold/unhold functionality. Make Sure PhoneA is in 2g mode (GSM). Make Sure PhoneB is able to make/receive call. Call from PhoneA to PhoneB, accept on PhoneB, hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices # make sure PhoneA is GSM phone before proceed. if (ads[0].droid.telephonyGetPhoneType() != PHONE_TYPE_GSM): raise signals.TestSkip( "Not GSM phone, abort this gsm hold/unhold test") tasks = [(phone_setup_voice_2g, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MO Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[0], ads[1], ad_hangup=None, verify_caller_func=is_phone_in_call_2g, verify_callee_func=None): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False return True @test_tracker_info(uuid="a8279cda-73b3-470a-8ca7-a331ef99270b") @TelephonyBaseTest.tel_test_wrap def test_call_gsm_mt_hold_unhold(self): """ Test GSM call hold/unhold functionality. Make Sure PhoneA is in 2g mode (GSM). Make Sure PhoneB is able to make/receive call. Call from PhoneB to PhoneA, accept on PhoneA, hold and unhold on PhoneA. Returns: True if pass; False if fail. """ ads = self.android_devices # make sure PhoneA is GSM phone before proceed. if (ads[0].droid.telephonyGetPhoneType() != PHONE_TYPE_GSM): self.log.error("Not GSM phone, abort this wcdma hold/unhold test.") return False tasks = [(phone_setup_voice_2g, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ads[0].droid.telecomCallClearCallList() if num_active_calls(self.log, ads[0]) != 0: ads[0].log.error("Call List is not empty.") return False self.log.info("Begin MT Call Hold/Unhold Test.") if not call_setup_teardown( self.log, ads[1], ads[0], ad_hangup=None, verify_caller_func=None, verify_callee_func=is_phone_in_call_2g): return False if not self._hold_unhold_test(ads): self.log.error("Hold/Unhold test fail.") return False return True def _test_call_long_duration(self, dut_incall_check_func, total_duration): ads = self.android_devices self.log.info("Long Duration Call Test. Total duration = %s", total_duration) return call_setup_teardown( self.log, ads[0], ads[1], ads[0], verify_caller_func=dut_incall_check_func, wait_time_in_call=total_duration) @test_tracker_info(uuid="d0008b51-25ed-414a-9b82-3ffb139a6e0d") @TelephonyBaseTest.tel_test_wrap def test_call_long_duration_volte(self): """ Test call drop rate for VoLTE long duration call. Steps: 1. Setup VoLTE for DUT. 2. Make VoLTE call from DUT to PhoneB. 3. For time, check if DUT drop call or not. Expected Results: DUT should not drop call. Returns: False if DUT call dropped during test. Otherwise True. """ ads = self.android_devices tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False return self._test_call_long_duration( is_phone_in_call_volte, self.long_duration_call_total_duration) @test_tracker_info(uuid="d4c1aec0-df05-403f-954c-496faf18605a") @TelephonyBaseTest.tel_test_wrap def test_call_long_duration_wfc(self): """ Test call drop rate for WiFi Calling long duration call. Steps: 1. Setup WFC for DUT. 2. Make WFC call from DUT to PhoneB. 3. For time, check if DUT drop call or not. Expected Results: DUT should not drop call. Returns: False if DUT call dropped during test. Otherwise True. """ ads = self.android_devices tasks = [(phone_setup_iwlan, (self.log, ads[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False return self._test_call_long_duration( is_phone_in_call_iwlan, self.long_duration_call_total_duration) @test_tracker_info(uuid="bc44f3ca-2616-4024-b959-3a5a85503dfd") @TelephonyBaseTest.tel_test_wrap def test_call_long_duration_3g(self): """ Test call drop rate for 3G long duration call. Steps: 1. Setup 3G for DUT. 2. Make CS call from DUT to PhoneB. 3. For time, check if DUT drop call or not. Expected Results: DUT should not drop call. Returns: False if DUT call dropped during test. Otherwise True. """ ads = self.android_devices tasks = [(phone_setup_voice_3g, (self.log, ads[0])), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False return self._test_call_long_duration( is_phone_in_call_3g, self.long_duration_call_total_duration) def _test_call_hangup_while_ringing(self, ad_caller, ad_callee): """ Call a phone and verify ringing, then hangup from the originator 1. Setup PhoneA and PhoneB to ensure voice service. 2. Call from PhoneA to PhoneB and wait for ringing. 3. End the call on PhoneA. Returns: True if pass; False if fail. """ caller_number = ad_caller.telephony['subscription'][ get_outgoing_voice_sub_id(ad_caller)]['phone_num'] callee_number = ad_callee.telephony['subscription'][ get_incoming_voice_sub_id(ad_callee)]['phone_num'] tasks = [(phone_setup_voice_general, (self.log, ad_caller)), (phone_setup_voice_general, (self.log, ad_callee))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False ad_caller.droid.telecomCallClearCallList() if num_active_calls(self.log, ad_caller) != 0: ad_caller.log.error("Phone has ongoing calls.") return False if not initiate_call(self.log, ad_caller, callee_number): ad_caller.log.error("Phone was unable to initate a call") return False if not wait_for_ringing_call(self.log, ad_callee, caller_number): ad_callee.log.error("Phone never rang.") return False if not hangup_call(self.log, ad_caller): ad_caller.log.error("Unable to hang up the call") return False return True @test_tracker_info(uuid="ef4fb42d-9040-46f2-9626-d0a2e1dd854f") @TelephonyBaseTest.tel_test_wrap def test_call_mo_hangup_while_ringing(self): """ Call a phone and verify ringing, then hangup from the originator 1. Setup PhoneA and PhoneB to ensure voice service. 2. Call from PhoneA to PhoneB and wait for ringing. 3. End the call on PhoneA. Returns: True if pass; False if fail. """ return self._test_call_hangup_while_ringing(self.android_devices[0], self.android_devices[1]) @test_tracker_info(uuid="f514ac72-d551-4e21-b5af-bd87b6cdf34a") @TelephonyBaseTest.tel_test_wrap def test_call_mt_hangup_while_ringing(self): """ Call a phone and verify ringing, then hangup from the originator 1. Setup PhoneA and PhoneB to ensure voice service. 2. Call from PhoneB to PhoneA and wait for ringing. 3. End the call on PhoneB. Returns: True if pass; False if fail. """ return self._test_call_hangup_while_ringing(self.android_devices[1], self.android_devices[0]) def _test_call_setup_in_active_data_transfer( self, nw_gen=None, call_direction=DIRECTION_MOBILE_ORIGINATED, allow_data_transfer_interruption=False): """Test call can be established during active data connection. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting downloading file from Internet. Initiate a voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Note: file download will be suspended when call is initiated if voice is using voice channel and voice channel and data channel are on different RATs. Returns: True if success. False if failed. """ ads = self.android_devices def _call_setup_teardown(log, ad_caller, ad_callee, ad_hangup, caller_verifier, callee_verifier, wait_time_in_call): #wait time for active data transfer time.sleep(5) return call_setup_teardown(log, ad_caller, ad_callee, ad_hangup, caller_verifier, callee_verifier, wait_time_in_call) if nw_gen: if not ensure_network_generation(self.log, ads[0], nw_gen, MAX_WAIT_TIME_NW_SELECTION, NETWORK_SERVICE_DATA): ads[0].log.error("Device failed to reselect in %s.", MAX_WAIT_TIME_NW_SELECTION) return False ads[0].droid.telephonyToggleDataConnection(True) if not wait_for_cell_data_connection(self.log, ads[0], True): ads[0].log.error("Data connection is not on cell") return False if not verify_internet_connection(self.log, ads[0]): ads[0].log.error("Internet connection is not available") return False if call_direction == DIRECTION_MOBILE_ORIGINATED: ad_caller = ads[0] ad_callee = ads[1] else: ad_caller = ads[1] ad_callee = ads[0] ad_download = ads[0] start_youtube_video(ad_download) call_task = (_call_setup_teardown, (self.log, ad_caller, ad_callee, ad_caller, None, None, 30)) download_task = active_file_download_task(self.log, ad_download) results = run_multithread_func(self.log, [download_task, call_task]) if wait_for_state(ad_download.droid.audioIsMusicActive, True, 15, 1): ad_download.log.info("After call hangup, audio is back to music") else: ad_download.log.warning( "After call hang up, audio is not back to music") ad_download.force_stop_apk("com.google.android.youtube") if not results[1]: self.log.error("Call setup failed in active data transfer.") return False if results[0]: ad_download.log.info("Data transfer succeeded.") return True elif not allow_data_transfer_interruption: ad_download.log.error( "Data transfer failed with parallel phone call.") return False else: ad_download.log.info("Retry data connection after call hung up") if not verify_internet_connection(self.log, ad_download): ad_download.log.error("Internet connection is not available") return False else: return True @test_tracker_info(uuid="aa40e7e1-e64a-480b-86e4-db2242449555") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_general_in_active_data_transfer(self): """Test call can be established during active data connection. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting downloading file from Internet. Initiate a MO voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Note: file download will be suspended when call is initiated if voice is using voice channel and voice channel and data channel are on different RATs. Returns: True if success. False if failed. """ return self._test_call_setup_in_active_data_transfer( None, DIRECTION_MOBILE_ORIGINATED) @test_tracker_info(uuid="d750d66b-2091-4e8d-baa2-084b9d2bbff5") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_general_in_active_data_transfer(self): """Test call can be established during active data connection. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting downloading file from Internet. Initiate a MT voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Note: file download will be suspended when call is initiated if voice is using voice channel and voice channel and data channel are on different RATs. Returns: True if success. False if failed. """ return self._test_call_setup_in_active_data_transfer( None, DIRECTION_MOBILE_TERMINATED) @test_tracker_info(uuid="35703e83-b3e6-40af-aeaf-6b983d6205f4") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_volte_in_active_data_transfer(self): """Test call can be established during active data connection. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting downloading file from Internet. Initiate a MO voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Note: file download will be suspended when call is initiated if voice is using voice channel and voice channel and data channel are on different RATs. Returns: True if success. False if failed. """ if not phone_setup_volte(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup VoLTE") return False return self._test_call_setup_in_active_data_transfer( GEN_4G, DIRECTION_MOBILE_ORIGINATED) @test_tracker_info(uuid="a0f658d9-4212-44db-b3e8-7202f1eec04d") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_volte_in_active_data_transfer(self): """Test call can be established during active data connection. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting downloading file from Internet. Initiate a MT voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Note: file download will be suspended when call is initiated if voice is using voice channel and voice channel and data channel are on different RATs. Returns: True if success. False if failed. """ if not phone_setup_volte(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup VoLTE") return False return self._test_call_setup_in_active_data_transfer( GEN_4G, DIRECTION_MOBILE_TERMINATED) @test_tracker_info(uuid="e0b264ec-fc29-411e-b018-684b7ff5a37e") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_csfb_in_active_data_transfer(self): """Test call can be established during active data connection. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting downloading file from Internet. Initiate a MO voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Note: file download will be suspended when call is initiated if voice is using voice channel and voice channel and data channel are on different RATs. Returns: True if success. False if failed. """ if not phone_setup_csfb(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup VoLTE") return False return self._test_call_setup_in_active_data_transfer( GEN_4G, DIRECTION_MOBILE_ORIGINATED, allow_data_transfer_interruption=True) @test_tracker_info(uuid="98f04a27-74e1-474d-90d1-a4a45cdb6f5b") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_csfb_in_active_data_transfer(self): """Test call can be established during active data connection. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting downloading file from Internet. Initiate a MT voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Note: file download will be suspended when call is initiated if voice is using voice channel and voice channel and data channel are on different RATs. Returns: True if success. False if failed. """ if not phone_setup_csfb(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup VoLTE") return False return self._test_call_setup_in_active_data_transfer( GEN_4G, DIRECTION_MOBILE_TERMINATED, allow_data_transfer_interruption=True) @test_tracker_info(uuid="359b1ee1-36a6-427b-9d9e-4d77231fcb09") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_3g_in_active_data_transfer(self): """Test call can be established during active data connection. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting downloading file from Internet. Initiate a MO voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Note: file download will be suspended when call is initiated if voice is using voice channel and voice channel and data channel are on different RATs. Returns: True if success. False if failed. """ if not phone_setup_voice_3g(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup 3G") return False return self._test_call_setup_in_active_data_transfer( GEN_3G, DIRECTION_MOBILE_ORIGINATED, allow_data_transfer_interruption=True) @test_tracker_info(uuid="b172bbb4-2d6e-4d83-a381-ebfdf23bc30e") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_3g_in_active_data_transfer(self): """Test call can be established during active data connection. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting downloading file from Internet. Initiate a MT voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Note: file download will be suspended when call is initiated if voice is using voice channel and voice channel and data channel are on different RATs. Returns: True if success. False if failed. """ if not phone_setup_voice_3g(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup 3G") return False return self._test_call_setup_in_active_data_transfer( GEN_3G, DIRECTION_MOBILE_TERMINATED, allow_data_transfer_interruption=True) @test_tracker_info(uuid="f5d9bfd0-0996-4c18-b11e-c6113dc201e2") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_2g_in_active_data_transfer(self): """Test call can be established during active data connection. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting downloading file from Internet. Initiate a MO voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Note: file download will be suspended when call is initiated if voice is using voice channel and voice channel and data channel are on different RATs. Returns: True if success. False if failed. """ if not phone_setup_voice_2g(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup voice in 2G") return False return self._test_call_setup_in_active_data_transfer( GEN_2G, DIRECTION_MOBILE_ORIGINATED, allow_data_transfer_interruption=True) @test_tracker_info(uuid="99cfd1be-b992-48bf-a50e-fc3eec8e5a67") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_2g_in_active_data_transfer(self): """Test call can be established during active data connection. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting downloading file from Internet. Initiate a MT voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Note: file download will be suspended when call is initiated if voice is using voice channel and voice channel and data channel are on different RATs. Returns: True if success. False if failed. """ if not phone_setup_voice_2g(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup voice in 2G") return False return self._test_call_setup_in_active_data_transfer( GEN_2G, DIRECTION_MOBILE_TERMINATED, allow_data_transfer_interruption=True) @test_tracker_info(uuid="12677cf2-40d3-4bb1-8afa-91ebcbd0f862") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_wifi_wfc_in_active_data_transfer(self): """Test call can be established during active data connection. Turn off airplane mode, turn on wfc and wifi. Starting downloading file from Internet. Initiate a MO voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Returns: True if success. False if failed. """ if not phone_setup_iwlan(self.log, self.android_devices[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass): self.android_devices[0].log.error( "Failed to setup IWLAN with NON-APM WIFI WFC on") return False return self._test_call_setup_in_active_data_transfer( None, DIRECTION_MOBILE_ORIGINATED) @test_tracker_info(uuid="84adcc19-43bb-4ea3-9284-7322ab139aac") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_wifi_wfc_in_active_data_transfer(self): """Test call can be established during active data connection. Turn off airplane mode, turn on wfc and wifi. Starting downloading file from Internet. Initiate a MT voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Returns: True if success. False if failed. """ if not phone_setup_iwlan(self.log, self.android_devices[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass): self.android_devices[0].log.error( "Failed to setup iwlan with APM off and WIFI and WFC on") return False return self._test_call_setup_in_active_data_transfer( None, DIRECTION_MOBILE_TERMINATED) @test_tracker_info(uuid="42566255-c33f-406c-abab-932a0aaa01a8") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_apm_wifi_wfc_in_active_data_transfer(self): """Test call can be established during active data connection. Turn on wifi-calling, airplane mode and wifi. Starting downloading file from Internet. Initiate a MO voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Returns: True if success. False if failed. """ if not phone_setup_iwlan(self.log, self.android_devices[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass): self.android_devices[0].log.error( "Failed to setup iwlan with APM, WIFI and WFC on") return False return self._test_call_setup_in_active_data_transfer( None, DIRECTION_MOBILE_ORIGINATED) @test_tracker_info(uuid="fbf52f60-449b-46f2-9486-36d338a1b070") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_apm_wifi_wfc_in_active_data_transfer(self): """Test call can be established during active data connection. Turn on wifi-calling, airplane mode and wifi. Starting downloading file from Internet. Initiate a MT voice call. Verify call can be established. Hangup Voice Call, verify file is downloaded successfully. Returns: True if success. False if failed. """ if not phone_setup_iwlan(self.log, self.android_devices[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass): self.android_devices[0].log.error( "Failed to setup iwlan with APM, WIFI and WFC on") return False return self._test_call_setup_in_active_data_transfer( None, DIRECTION_MOBILE_TERMINATED) def _test_call_setup_in_active_youtube_video( self, nw_gen=None, call_direction=DIRECTION_MOBILE_ORIGINATED, allow_data_transfer_interruption=False): """Test call can be established during active data connection. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting playing youtube video. Initiate a voice call. Verify call can be established. Returns: True if success. False if failed. """ ads = self.android_devices if nw_gen: if not ensure_network_generation(self.log, ads[0], nw_gen, MAX_WAIT_TIME_NW_SELECTION, NETWORK_SERVICE_DATA): ads[0].log.error("Device failed to reselect in %s.", MAX_WAIT_TIME_NW_SELECTION) return False else: ensure_phones_default_state(self.log, self.android_devices) self.android_devices[0].droid.telephonyToggleDataConnection(True) if not wait_for_cell_data_connection(self.log, ads[0], True): ads[0].log.error("Data connection is not on cell") return False if not verify_internet_connection(self.log, ads[0]): ads[0].log.error("Internet connection is not available") return False if call_direction == DIRECTION_MOBILE_ORIGINATED: ad_caller = ads[0] ad_callee = ads[1] else: ad_caller = ads[1] ad_callee = ads[0] ad_download = ads[0] if not start_youtube_video(ad_download): ad_download.log.warning("Fail to bring up youtube video") if not call_setup_teardown(self.log, ad_caller, ad_callee, ad_caller, None, None, 30): ad_download.log.error("Call setup failed in active youtube video") result = False else: ad_download.log.info("Call setup succeed in active youtube video") result = True if wait_for_state(ad_download.droid.audioIsMusicActive, True, 15, 1): ad_download.log.info("After call hangup, audio is back to music") else: ad_download.log.warning( "After call hang up, audio is not back to music") ad_download.force_stop_apk("com.google.android.youtube") return result @test_tracker_info(uuid="1dc9f03f-1b6c-4c17-993b-3acafdc26ea3") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_general_in_active_youtube_video(self): """Test call can be established during active youtube video. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting an youtube video. Initiate a MO voice call. Verify call can be established. Returns: True if success. False if failed. """ return self._test_call_setup_in_active_youtube_video( None, DIRECTION_MOBILE_ORIGINATED) @test_tracker_info(uuid="32bc8fab-a0b9-4d47-8afb-940d1fdcde02") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_general_in_active_youtube_video(self): """Test call can be established during active youtube video. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting an youtube video. Initiate a MT voice call. Verify call can be established. Returns: True if success. False if failed. """ return self._test_call_setup_in_active_youtube_video( None, DIRECTION_MOBILE_TERMINATED) @test_tracker_info(uuid="72204212-e0c8-4447-be3f-ae23b2a63a1c") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_volte_in_active_youtube_video(self): """Test call can be established during active youtube video. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting an youtube video. Initiate a MO voice call. Verify call can be established. Returns: True if success. False if failed. """ if not phone_setup_volte(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup VoLTE") return False return self._test_call_setup_in_active_youtube_video( GEN_4G, DIRECTION_MOBILE_ORIGINATED) @test_tracker_info(uuid="84cd3ab9-a2b2-4ef9-b531-ee6201bec128") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_volte_in_active_youtube_video(self): """Test call can be established during active youtube video. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting an youtube video. Initiate a MT voice call. Verify call can be established. Returns: True if success. False if failed. """ if not phone_setup_volte(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup VoLTE") return False return self._test_call_setup_in_active_youtube_video( GEN_4G, DIRECTION_MOBILE_TERMINATED) @test_tracker_info(uuid="a8dca8d3-c44c-40a6-be56-931b4be5499b") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_csfb_in_active_youtube_video(self): """Test call can be established during active youbube video. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting an youtube video. Initiate a MO voice call. Verify call can be established. Returns: True if success. False if failed. """ if not phone_setup_csfb(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup VoLTE") return False return self._test_call_setup_in_active_youtube_video( GEN_4G, DIRECTION_MOBILE_ORIGINATED, allow_data_transfer_interruption=True) @test_tracker_info(uuid="d11f7263-f51d-4ea3-916a-0df4f52023ce") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_csfb_in_active_youtube_video(self): """Test call can be established during active youtube video. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting an youtube video. Initiate a MT voice call. Verify call can be established. Returns: True if success. False if failed. """ if not phone_setup_csfb(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup VoLTE") return False return self._test_call_setup_in_active_youtube_video( GEN_4G, DIRECTION_MOBILE_TERMINATED, allow_data_transfer_interruption=True) @test_tracker_info(uuid="676378b4-94b7-4ad7-8242-7ccd2bf1efba") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_3g_in_active_youtube_video(self): """Test call can be established during active youtube video. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting an youtube video. Initiate a MO voice call. Verify call can be established. Returns: True if success. False if failed. """ if not phone_setup_voice_3g(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup 3G") return False return self._test_call_setup_in_active_youtube_video( GEN_3G, DIRECTION_MOBILE_ORIGINATED, allow_data_transfer_interruption=True) @test_tracker_info(uuid="6216fc6d-2aa2-4eb9-90e2-5791cb31c12e") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_3g_in_active_youtube_video(self): """Test call can be established during active youtube video. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting youtube video. Initiate a MT voice call. Verify call can be established. Returns: True if success. False if failed. """ if not phone_setup_voice_3g(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup 3G") return False return self._test_call_setup_in_active_youtube_video( GEN_3G, DIRECTION_MOBILE_TERMINATED, allow_data_transfer_interruption=True) @test_tracker_info(uuid="58ec9783-6f8e-49f6-8dae-9dd33108b6f9") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_2g_in_active_youtube_video(self): """Test call can be established during active youtube video. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting youtube video. Initiate a MO voice call. Verify call can be established. Returns: True if success. False if failed. """ if not phone_setup_voice_2g(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup voice in 2G") return False return self._test_call_setup_in_active_youtube_video( GEN_2G, DIRECTION_MOBILE_ORIGINATED, allow_data_transfer_interruption=True) @test_tracker_info(uuid="e8ba7c0c-48a3-4fc6-aa34-a2e1c570521a") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_2g_in_active_youtube_video(self): """Test call can be established during active youtube video. Turn off airplane mode, disable WiFi, enable Cellular Data. Make sure phone in . Starting an youtube video. Initiate a MT voice call. Verify call can be established. Returns: True if success. False if failed. """ if not phone_setup_voice_2g(self.log, self.android_devices[0]): self.android_devices[0].log.error("Failed to setup voice in 2G") return False return self._test_call_setup_in_active_youtube_video( GEN_2G, DIRECTION_MOBILE_TERMINATED, allow_data_transfer_interruption=True) @test_tracker_info(uuid="eb8971c1-b34a-430f-98df-0d4554c7ab12") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_wifi_wfc_in_active_youtube_video(self): """Test call can be established during active youtube video. Turn off airplane mode, turn on wfc and wifi. Starting youtube video. Initiate a MO voice call. Verify call can be established. Returns: True if success. False if failed. """ if not phone_setup_iwlan(self.log, self.android_devices[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass): self.android_devices[0].log.error( "Failed to setup IWLAN with NON-APM WIFI WFC on") return False return self._test_call_setup_in_active_youtube_video( None, DIRECTION_MOBILE_ORIGINATED) @test_tracker_info(uuid="275a93d6-1f39-40c8-893f-ff77afd09e54") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_wifi_wfc_in_active_youtube_video(self): """Test call can be established during active youtube_video. Turn off airplane mode, turn on wfc and wifi. Starting an youtube video. Initiate a MT voice call. Verify call can be established. Returns: True if success. False if failed. """ if not phone_setup_iwlan(self.log, self.android_devices[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass): self.android_devices[0].log.error( "Failed to setup iwlan with APM off and WIFI and WFC on") return False return self._test_call_setup_in_active_youtube_video( None, DIRECTION_MOBILE_TERMINATED) @test_tracker_info(uuid="ea087709-d4df-4223-b80c-1b33bacbd5a2") @TelephonyBaseTest.tel_test_wrap def test_call_mo_voice_apm_wifi_wfc_in_active_youtube_video(self): """Test call can be established during active youtube video. Turn on wifi-calling, airplane mode and wifi. Starting an youtube video. Initiate a MO voice call. Verify call can be established. Returns: True if success. False if failed. """ if not phone_setup_iwlan(self.log, self.android_devices[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass): self.android_devices[0].log.error( "Failed to setup iwlan with APM, WIFI and WFC on") return False return self._test_call_setup_in_active_youtube_video( None, DIRECTION_MOBILE_ORIGINATED) @test_tracker_info(uuid="44cc14e0-60c7-4fdb-ad26-31fdc4e52aaf") @TelephonyBaseTest.tel_test_wrap def test_call_mt_voice_apm_wifi_wfc_in_active_youtube_video(self): """Test call can be established during active youtube video. Turn on wifi-calling, airplane mode and wifi. Starting youtube video. Initiate a MT voice call. Verify call can be established. Returns: True if success. False if failed. """ if not phone_setup_iwlan(self.log, self.android_devices[0], True, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass): self.android_devices[0].log.error( "Failed to setup iwlan with APM, WIFI and WFC on") return False return self._test_call_setup_in_active_youtube_video( None, DIRECTION_MOBILE_TERMINATED) @test_tracker_info(uuid="f367de12-1fd8-488d-816f-091deaacb791") @TelephonyBaseTest.tel_test_wrap def test_call_wfc_wifi_preferred_after_mobile_data_usage_limit_reached( self): """ WiFi Preferred, WiFi calling test after data limit reached 1. Set the data limit to the current usage 2. Setup PhoneA WFC mode: WIFI_PREFERRED. 3. Make Sure PhoneB is in 3G mode. 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 5. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure is not success. """ ads = self.android_devices try: subscriber_id = ads[0].droid.telephonyGetSubscriberId() data_usage = get_mobile_data_usage(ads[0], subscriber_id) set_mobile_data_usage_limit(ads[0], data_usage, subscriber_id) # Turn OFF WiFi for Phone B set_wifi_to_default(self.log, ads[1]) tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_3g, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_iwlan, is_phone_in_call_iwlan, ads[1], phone_idle_3g, is_phone_in_call_3g, None) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) finally: remove_mobile_data_usage_limit(ads[0], subscriber_id) @test_tracker_info(uuid="af943c7f-2b42-408f-b8a3-2d360a7483f7") @TelephonyBaseTest.tel_test_wrap def test_call_volte_after_mobile_data_usage_limit_reached(self): """ VoLTE to VoLTE call test after mobile data usage limit reached 1. Set the data limit to the current usage 2. Make Sure PhoneA is in LTE mode (with VoLTE). 3. Make Sure PhoneB is in LTE mode (with VoLTE). 4. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneA. 5. Call from PhoneA to PhoneB, accept on PhoneB, hang up on PhoneB. Raises: TestFailure if not success. """ ads = self.android_devices try: subscriber_id = ads[0].droid.telephonyGetSubscriberId() data_usage = get_mobile_data_usage(ads[0], subscriber_id) set_mobile_data_usage_limit(ads[0], data_usage, subscriber_id) tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") self.tel_logger.set_result(CallResult("CALL_SETUP_FAILURE")) raise signals.TestFailure("Failed", extras={"fail_reason": "Phone Failed to Set Up Properly."}) result = two_phone_call_short_seq( self.log, ads[0], phone_idle_volte, is_phone_in_call_volte, ads[1], phone_idle_volte, is_phone_in_call_volte, None, WAIT_TIME_IN_CALL_FOR_IMS) self.tel_logger.set_result(result.result_value) if not result: raise signals.TestFailure("Failed", extras={"fail_reason": str(result.result_value)}) finally: remove_mobile_data_usage_limit(ads[0], subscriber_id) @test_tracker_info(uuid="7955f1ae-84b1-4c33-9e59-af930605672a") @TelephonyBaseTest.tel_test_wrap def test_volte_in_call_wifi_toggling(self): """ General voice to voice call. 1. Make Sure PhoneA in VoLTE. 2. Make Sure PhoneB in VoLTE. 3. Call from PhoneA to PhoneB. 4. Toggling Wifi connnection in call. 5. Verify call is active. 6. Hung up the call on PhoneA Returns: True if pass; False if fail. """ ads = self.android_devices result = True tasks = [(phone_setup_volte, (self.log, ads[0])), (phone_setup_volte, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False if not call_setup_teardown(self.log, ads[0], ads[1], None, None, None, 5): self.log.error("Call setup failed") return False else: self.log.info("Call setup succeed") if not wifi_cell_switching(self.log, ads[0], self.wifi_network_ssid, self.wifi_network_pass, GEN_4G): ads[0].log.error("Failed to do WIFI and Cell switch in call") result = False if not is_phone_in_call_active(ads[0]): return False else: if not ads[0].droid.telecomCallGetAudioState(): ads[0].log.error("Audio is not on call") result = False else: ads[0].log.info("Audio is on call") hangup_call(self.log, ads[0]) return result @test_tracker_info(uuid="8a853186-cdff-4078-930a-6c619ea89183") @TelephonyBaseTest.tel_test_wrap def test_wfc_in_call_wifi_toggling(self): """ General voice to voice call. TMO Only Test 1. Make Sure PhoneA in wfc with APM off. 2. Make Sure PhoneB in Voice Capable. 3. Call from PhoneA to PhoneB. 4. Toggling Wifi connnection in call. 5. Verify call is active. 6. Hung up the call on PhoneA Returns: True if pass; False if fail. """ ads = self.android_devices result = True tasks = [(phone_setup_iwlan, (self.log, ads[0], False, WFC_MODE_WIFI_PREFERRED, self.wifi_network_ssid, self.wifi_network_pass)), (phone_setup_voice_general, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False if not call_setup_teardown(self.log, ads[0], ads[1], None, None, None, 5): self.log.error("Call setup failed") return False else: self.log.info("Call setup succeed") if not wifi_cell_switching(self.log, ads[0], self.wifi_network_ssid, self.wifi_network_pass, GEN_4G): ads[0].log.error("Failed to do WIFI and Cell switch in call") result = False if not is_phone_in_call_active(ads[0]): return False else: if not ads[0].droid.telecomCallGetAudioState(): ads[0].log.error("Audio is not on call") result = False else: ads[0].log.info("Audio is on call") hangup_call(self.log, ads[0]) return result @test_tracker_info(uuid="187bf7b5-d122-4914-82c0-b0709272ee12") @TelephonyBaseTest.tel_test_wrap def test_csfb_in_call_wifi_toggling(self): """ General voice to voice call. 1. Make Sure PhoneA in CSFB. 2. Make Sure PhoneB in CSFB. 3. Call from PhoneA to PhoneB. 4. Toggling Wifi connnection in call. 5. Verify call is active. 6. Hung up the call on PhoneA Returns: True if pass; False if fail. """ ads = self.android_devices result = True tasks = [(phone_setup_csfb, (self.log, ads[0])), (phone_setup_csfb, (self.log, ads[1]))] if not multithread_func(self.log, tasks): self.log.error("Phone Failed to Set Up Properly.") return False if not call_setup_teardown(self.log, ads[0], ads[1], None, None, None, 5): self.log.error("Call setup failed") return False else: self.log.info("Call setup succeed") if not wifi_cell_switching(self.log, ads[0], self.wifi_network_ssid, self.wifi_network_pass, GEN_3G): ads[0].log.error("Faile to do WIFI and Cell switch in call") result = False if not is_phone_in_call_active(ads[0]): return False else: if not ads[0].droid.telecomCallGetAudioState(): ads[0].log.error("Audio is not on call") result = False else: ads[0].log.info("Audio is on call") hangup_call(self.log, ads[0]) return result """ Tests End """