1# Copyright 2017 The Android Open Source Project 2# 3# Licensed under the Apache License, Version 2.0 (the "License"); 4# you may not use this file except in compliance with the License. 5# You may obtain a copy of the License at 6# 7# http://www.apache.org/licenses/LICENSE-2.0 8# 9# Unless required by applicable law or agreed to in writing, software 10# distributed under the License is distributed on an "AS IS" BASIS, 11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 12# See the License for the specific language governing permissions and 13# limitations under the License. 14# 15 16# If you don't need to do a full clean build but would like to touch 17# a file or delete some intermediate files, add a clean step to the end 18# of the list. These steps will only be run once, if they haven't been 19# run before. 20# 21# E.g.: 22# $(call add-clean-step, touch -c external/sqlite/sqlite3.h) 23# $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates) 24# 25# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with 26# files that are missing or have been moved. 27# 28# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory. 29# Use $(OUT_DIR) to refer to the "out" directory. 30# 31# If you need to re-do something that's already mentioned, just copy 32# the command and add it to the bottom of the list. E.g., if a change 33# that you made last week required touching a file and a change you 34# made today requires touching the same file, just copy the old 35# touch step and add it to the end of the list. 36# 37# ************************************************ 38# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST 39# ************************************************ 40 41# For example: 42#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates) 43#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates) 44#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f) 45#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*) 46 47$(call add-clean-step, rm -rf $(PRODUCT_OUT)) 48$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor) 49$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor) 50 51# Remove /system/lib[64]/vndk-sp/libz.so 52$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/vndk-sp/libz.so) 53$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib64/vndk-sp/libz.so) 54 55# Remove Power HAL 1.2 56$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.power@1.2-service.bonito-libperfmgr.rc) 57 58# Remove Vibrator HAL 1.1 59$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.vibrator@1.1-service.bonito.rc) 60$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.vibrator@1.1-service.bonito) 61 62# Remove /product mount point 63$(call add-clean-step, rm -rf $(PRODUCT_OUT)/product) 64$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/product) 65$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/product) 66 67# Remove android.hardware.audio*@2.0 implementation 68$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib/hw/android.hardware.audio*@2.0-impl.so) 69 70# Adds product.img 71$(call add-clean-step, rm -rf $(PRODUCT_OUT)/product) 72$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/product) 73$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app) 74$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc) 75$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/fonts) 76$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/framework) 77$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/media) 78$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app) 79$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/product) 80$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/usr) 81 82# Remove default android.hardware.health@2.0-service 83$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.health@2.0-service) 84$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.health@2.0-service.rc) 85 86# Remove healthd 87$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/healthd) 88$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/init/healthd.rc) 89 90# Remove KM3 RC 91$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.keymaster@3.0-service-qti.rc) 92 93# Remove Codec2.0 software process 94$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/hw/hardware.google.media.c2@1.0-service-software) 95$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/hardware.google.media.c2@1.0-service-software.rc) 96 97# Remove default android.hardware.graphics.composer@2.1 98$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.graphics.composer@2.1-service) 99$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.graphics.composer@2.1-service.rc) 100$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.graphics.composer@2.1-impl.so) 101 102# Remove StrongBox RC 103$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.keymaster@4.0-service.citadel.rc) 104 105# Migrate to versioned VNDK directory 106$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/vndk-sp) 107 108# Remove non-qti-display mapper (b/79269048) 109$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib/hw/android.hardware.graphics.mapper@2.0-impl.so) 110$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.graphics.mapper@2.0-impl.so) 111$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib/hw/android.hardware.graphics.allocator@2.0-impl.so) 112$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.graphics.allocator@2.0-impl.so) 113$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.graphics.allocator@2.0-service) 114$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.graphics.allocator@2.0-service.rc) 115 116#AU300 cleanup 117$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor) 118$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system) 119$(call add-clean-step, rm -rf $(PRODUCT_OUT)/product) 120$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/include) 121 122# Secure_element HAL for eSE1 123$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.secure_element@1.0-service.rc) 124$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.secure_element@1.0-service) 125 126# Remove VR related files 127$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/thermal-engine-sargo-vr.conf) 128$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/thermal-engine-bonito-vr.conf) 129$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.vr@1.0-service.bonito.rc) 130$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/permissions/android.hardware.vr.headtracking.xml) 131$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/permissions/android.hardware.vr.high_performance.xml) 132$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.vr@1.0-service.bonito) 133 134# Remove /product mount point 135$(call add-clean-step, rm -rf $(PRODUCT_OUT)/product) 136$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/product) 137$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/product) 138 139# Remove init.environ.rc to force product to be recreated on other devices 140$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/init.environ.rc) 141 142# Verified boot xml moved to /product 143$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.software.verified_boot.xml) 144 145# Move libnfc-nci.conf to /vendor 146$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/libnfc-nci.conf) 147 148# ThermalHAL 1.1 149$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.thermal@1.1-service.bonito.rc) 150$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.thermal@1.1-service.bonito) 151 152# Move fingerprint input files to /vendor 153$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/usr/keylayout/uinput-fpc.kl) 154$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/usr/idc/uinput-fpc.idc) 155 156# Recovery init files moved to recovery 157$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/init.recovery.*.rc) 158 159# Add product partition 160$(call add-clean-step, rm -rf $(PRODUCT_OUT)/product) 161$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/product) 162$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app) 163$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc) 164$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/fonts) 165$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/framework) 166$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/media) 167$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app) 168$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/product) 169$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/usr) 170 171# Rename power HAL 172$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.power@1.3-service.bonito-libperfmgr.rc) 173 174# Remove generic atrace HAL 175$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.atrace@1.0-service.rc) 176$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/android.hardware.atrace@1.0-service.xml) 177 178# Remove obsolete android.hardware.boot@1.0-impl-wrapper.recovery.so 179$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/system/lib64/hw/android.hardware.boot@1.0-impl-wrapper.recovery.so) 180