1#Version check for XTRA
2#DISABLE = 0
3#AUTO    = 1
4#XTRA2   = 2
5#XTRA3   = 3
6XTRA_VERSION_CHECK=1
7
8# Error Estimate
9# _SET = 1
10# _CLEAR = 0
11ERR_ESTIMATE=0
12
13# NTP Server
14# NTP server setting is in modem NV
15
16# If NTP_SERVER is commented NTP_SERVER=time.izatcloud.net is used
17
18# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
19#               4 - Debug, 5 - Verbose
20# If DEBUG_LEVEL is commented, Android's logging levels will be used
21DEBUG_LEVEL = 2
22
23# Intermediate position report, 1=enable, 0=disable
24INTERMEDIATE_POS=0
25
26# GPS Capabilities bit mask
27# SCHEDULING = 0x01
28# MSB = 0x02
29# MSA = 0x04
30# ON_DEMAND_TIME = 0x10
31# GEOFENCE = 0x20
32# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
33CAPABILITIES=0x37
34
35# Accuracy threshold for intermediate positions
36# less accurate positions are ignored, 0 for passing all positions
37# ACCURACY_THRES=5000
38
39################################
40##### AGPS server settings #####
41################################
42# Bitmask of slots that are available
43# for write/install to, where 1s indicate writable,
44# and the default value is 0 where no slots
45# are writable. For example, AGPS_CERT_WRITABLE_MASK
46# of b1000001010 makes 3 slots available
47# and the remaining 7 slots unwritable.
48# AGPS_CERT_WRITABLE_MASK=0
49
50################################
51# EXTRA SETTINGS
52################################
53# NMEA provider (1=Modem Processor, 0=Application Processor)
54NMEA_PROVIDER=0
55
56# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
57SGLTE_TARGET=0
58
59# Mark these LPPe fields, they are MBN configured.
60##################################################
61# Select technology for LPPe Control Plane
62##################################################
63# 0x1: DBH for LPPe CP
64# 0x2: WLAN AP Measurements for LPPe CP
65# LPPE_CP_TECHNOLOGY = 0
66
67##################################################
68# Select technology for LPPe User Plane
69##################################################
70# 0x1: DBH for LPPe UP
71# 0x2: WLAN AP Measurements for LPPe UP
72# LPPE_UP_TECHNOLOGY = 0
73
74##################################################
75# AGPS_CONFIG_INJECT
76##################################################
77# enable/disable injection of AGPS configurations:
78#     SUPL_VER
79#     SUPL_HOST
80#     SUPL_PORT
81#     SUPL_MODE
82#     SUPL_ES
83#     C2K_HOST
84#     C2K_PORT
85#     LPP_PROFILE
86#     A_GLONASS_POS_PROTOCOL_SELECT
87#     USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL
88#     GPS_LOCK
89# 0: disable
90# 1: enable
91AGPS_CONFIG_INJECT = 1
92
93# AP Coarse Timestamp Uncertainty
94##################################################
95# default : 10
96# or as per clock uncertainty of product
97AP_TIMESTAMP_UNCERTAINTY = 10
98
99#####################################
100#DR_SYNC Pulse Availability
101#####################################
102# 0 : DR_SYNC pulse not available (default)
103# 1 : DR_SYNC pulse available
104DR_SYNC_ENABLED = 0
105
106#####################################
107#PPS Device name
108#####################################
109PPS_DEVICENAME = /dev/pps0
110
111#####################################
112#AP Clock Accuracy
113#####################################
114AP_CLOCK_PPM = 100
115
116#####################################
117#MAX ms difference to detect missing pulse
118#####################################
119MISSING_PULSE_TIME_DELTA = 900
120
121#####################################
122#Propagation time uncertainty
123#####################################
124PROPAGATION_TIME_UNCERTAINTY = 1
125