1##This file needs to be pushed into /vendor/etc/libese-nxp.conf
2
3###############################################################################
4# Application options
5SE_DEBUG_ENABLED=0
6
7
8#Timeout in secs
9NXP_SWP_RD_TAG_OP_TIMEOUT=0xFF
10
11#WTX Count in secs
12NXP_WTX_COUNT_VALUE=90
13
14# PN67T_PWR_SCHEME          0x01
15# PN80T_LEGACY_PWR_SCHEME   0x02
16# PN80T_EXT_PMU_SCHEME      0x03
17NXP_POWER_SCHEME=0x02
18
19# For SOF = 0x5A            0x01
20# For SOF = 0x00            0x02
21NXP_SOF_WRITE=0x01
22
23#SPI Thorughput measurement log enabled(1)/disabled(0) in kernel
24NXP_TP_MEASUREMENT=0x00
25
26#Enable/Disable interface reset as part of SPI open
27NXP_SPI_INTF_RST_ENABLE=0x01
28
29###############################################################################
30# SPI WRITE TIMEOUT for RF event synchronization
31NXP_SPI_WRITE_TIMEOUT=0x14
32
33###############################################################################
34# SPI Device Node name
35NXP_ESE_DEV_NODE="/dev/pn81a"
36
37#MAX NO OF R_NACK RETRY ALLOWED IN CASE OF CRC FAILURE
38NXP_MAX_RNACK_RETRY=0x0A
39