1qurt_elite_memorymap.cpp:qurt_elite_memorymap_add_remove_pool_page size or start addr is not a multiple of 4K (addr, size, status)->(0x%x, 0x%x, 0x%x)��qurt_elite_memorymap.cpp:qurt_elite_memorymap_add_remove_pool_page poolID:(%d, 0x%lx%lx, %lx)��qurt_elite_memorymap.cpp:qurt_elite_memorymap_add_remove_pool_page qurt_mem_pool_attach failed, poolID:(%d)����qurt_elite_memorymap.cpp:qurt_elite_memorymap_add_remove_pool_page done. poolID:(%d, 0x%lx%lx, %lx). result 0x%lx���EliteMain.cpp:Failed to initialize elite thread prio result = %d����elite_thrd_prio.c:DALSYS_GetDALPropertyHandleStr failed for elite thread prio!��elite_thrd_prio.c:DALSYS_GetPropertyValue failed for elite thread prio!�elite_thrd_prio.c:Unsupported thread prio ID %ld����elite_thrd_prio.c:Unsupported thrd_prio_id %ld, thrd_prio %ld���pd_audio_restart.cpp:PD service Registry Failed with Result %d��VoiceCmnUtils.cpp:VCP: Voice Cmn utility: Device Reset/Resync detected: client (%d), voice_drift_counter=(%ld), frame_counter=(%d), is_resync_pending(%ld), session(%#lx)���VoiceMixerSvc.cpp:VCP: VMX #%lu dropping buffer at stopped input %lu����VoiceTimer.cpp:VCP: vtm_subscribe_msg: client(%ld), vfr_mode(%d), vsid(%lx), vfr_id(%d), version(%d), offset(%d), vfr_cycle(%lx)����VoiceTimer.cpp:VCP: vtm_start_oneshot_timer: client(%ld), vfr_mode(%d), vsid(%lx), vfr_id(%d), version(%d), offset(%d)��VoiceTimer.cpp:VCP: vtm_start_oneshot_timer: Invalid timing version and/or invalid vfr mode�VoiceTimer.cpp:VCP: vtm_start_oneshot_timer: one shot timer index not available�VoiceTimer.cpp:VCP: vtm_start_oneshot_timer: one shot timer re-arming failed, result(%d)����VoiceTimer.cpp:VCP: vtm_start_oneshot_timer end, result=%d��voice_delivery.cpp:vds_diag_cmd_processing(): Command:(%d)��voice_delivery.cpp:vds_diag_cmd_processing(): set_param: threshold %d num_frames %d�voice_delivery.cpp:vds_diag_cmd_processing(): set_param failed: threshold %d or/and num_frames %d exceed range��voice_delivery.cpp:vds_diag_cmd_processing(): Diag Packet could not be allocated����voice_delivery.cpp:vds_diag_cmd_processing(): Rsp(0x%08x)���voice_delivery.cpp:VCP: vds_init_del_miss_response() vds_miss response (%d)�voice_delivery.cpp:VCP: Error! VDS had nothing to deliver, client token 0x%x, steady state miss count %u, out request count(%ld), instance(%x)��voice_delivery.cpp:VCP: Error! VDS had nothing to deliver, client token 0x%x, miss count %u, instance(%x), (%d)�voice_delivery.cpp:VCP: VDS Steady State entered! ��voice_delivery.cpp:VCP: vds_rec_process_undershoot_duration() rec_num_frames(%lu) exceeds thresh (%lu). Requesting deboost��voice_delivery.cpp:VCP: Failed to Open AVTimer Driver for VDS���voice_delivery.cpp:VCP: vds_exit_steady_state(): VDS is exiting steady state ���voice_delivery.cpp:VCP: Vds queue request : overshoot time(%lu) exceed permissible value(%lu). Ignoring. client token 0x%x, instance(%x)����voice_delivery.cpp:VCP: Vds queue request : curr(%lu)/max(%lu) overshoot in usec. client token 0x%x, instance(%x)���voice_delivery.cpp:VCP: VDS %d misses happened in %lu usec not expected. client_token = 0x%x, Taking response action!!�voice_delivery.cpp:VCP: Received invalid buffer from client. Dropping request. token 0x%x, instance(%x)�voice_delivery.cpp:VCP: Error! VDS dropping existing buffers because of resync��voice_delivery.cpp:VCP: Error! VDS dropping existing buffer as max requests reached�voice_delivery.cpp:VCP: No action taken for vds miss. miss_respone(%d)��voice_delivery.cpp:VCP:vds_miss_force_boost(): VDS requesting for clock boost. curr state %lu���voice_delivery.cpp:VCP:vds_miss_force_boost(): clearing overshoot value and counters for client %lx. client_id(%ld)�voice_delivery.cpp:VCP: VDS drop now requested for client token %x instance(%x)�voice_delivery.cpp:VCP: VDS dropping request, client token 0x%x, instance(%x)���voice_delivery.cpp:VCP: VDS drop now requested but not no packet is queued result %d, instance(%x)��vds_clk_mgmt.cpp:VCP: vcm_init(): Error!! Null pointer passed !!����vds_clk_mgmt.cpp:VCP: vcm_init(): registering for NPA CB����vds_clk_mgmt.cpp:VCP: vcm_deinit(): Error!! Null pointer passed !!��vds_clk_mgmt.cpp:VCP: vcm_boost(): Error!! Null pointer passed !!���vds_clk_mgmt.cpp:VCP: vcm_boost(): Error!! invalid boost (%p) or query handle (%p)��vds_clk_mgmt.cpp:VCP: vcm_boost(): Prev boost did not cause recovery. is_boost_req_sent(%d) is_boost_complted(%d)���vds_clk_mgmt.cpp:VCP: vcm_boost(): querying for current clock!!�vds_clk_mgmt.cpp:VCP: vcm_boost(): Query for /clk/cpu current state failed!�vds_clk_mgmt.cpp:VCP: vcm_boost(): boost with static adder(%lu) but clock-per-perf-level is not queried. adding VCM staic adder�vds_clk_mgmt.cpp:VCP: vcm_boost(): request for boost is successful. curr(%lu) and next(%lu) clk freq����vds_clk_mgmt.cpp:VCP: vcm_boost(): Failed to boost cpu clk. curr(%lu) next(%lu) max(%lu) clk freq���vds_clk_mgmt.cpp:VCP: vcm_deboost(): Error!! Null pointer passed !!�vds_clk_mgmt.cpp:VCP: vcm_deboost(): Error!! deboost is called without boost request����vds_clk_mgmt.cpp:VCP: vcm_deboost(): Error!! deboost is called before boost completed���vds_clk_mgmt.cpp:VCP: vcm_deboost(): deboost is successfully requested��vds_clk_mgmt.cpp:VCP: VCM_NPA_CPU_Resrc_Avail_Cb(): Error!! Null pointer passed!!���vds_clk_mgmt.cpp:VCP: VCM_NPA_CPU_Resrc_Avail_Cb(): CB from NPA is received !!��vds_clk_mgmt.cpp:VCP: VCM_NPA_CPU_Resrc_Avail_Cb(): creating boost client !!���vds_clk_mgmt.cpp:VCP: VCM_NPA_CPU_Resrc_Avail_Cb(): Error!! Failed to create NPA client !!��vds_clk_mgmt.cpp:VCP: vcm_query_cpu_freq(): Querying clk freq for each voltage level!!��vds_clk_mgmt.cpp:VCP: Creating /clk/cpu query handle failed!����vds_clk_mgmt.cpp:vcm_query_cpu_freq(): CLOCK_NPA_QUERY_NUM_PERF_LEVELS Failed. status (%d)��vds_clk_mgmt.cpp:vcm_query_cpu_freq(): num_clk_perf_levels = %d�vds_clk_mgmt.cpp:vcm_query_cpu_freq() failed: num_clk_perf_levels = %d, max = %d����vds_clk_mgmt.cpp:VCP: vcm_cpu_boost_cb(): Error!! Null pointer passed!!�vds_clk_mgmt.cpp:VCP: vcm_cpu_boost_cb(): is_boost_req_sent is true!!���vds_clk_mgmt.cpp:VCP: vcm_cpu_boost_cb(): deboost is successfully requested�vds_clk_mgmt.cpp:VCP: vcm_cpu_boost_cb(): is_boost_req_sent is false!!��vpm_apr_msg_handler.cpp:vpm_set_system_config_cmd_ctrl(): Sample rate set by client tx_sample_rate=%d, rx_sample_rate=%d, rx_in_sample_rate=%d��vpm_apr_msg_handler.cpp:vpm_set_param_v3_cmd_ctrl(): Unexpected payload size, %lu < expected: %lu���vpm_apr_msg_handler.cpp:vpm_set_param_v3_cmd_ctrl(): Invalid param data size, %lu���vpm_apr_msg_handler.cpp:vpm_set_param_v3_cmd_ctrl(): Unexpected payload size, %d != %d��vpm_apr_msg_handler.cpp:CVD_CAL_MSG_PARAM: vpm_set_param_v3_cmd_ctrl(): Param ID[0]=0x%08x instance ID[0]=0x%08x����vpm_apr_msg_handler.cpp:CVD_CAL_MSG_PARAM: vpm_set_param_v3_cmd_ctrl(): Payload[0-2]=0x%08x, 0x%08x, 0x%08x�vpm_apr_msg_handler.cpp:CVD_CAL_MSG_PARAM: vpm_set_param_v3_cmd_ctrl(): Payload[3]=0x%08x���vpm_apr_msg_handler.cpp:CVD_CAL_MSG_PARAM: vpm_set_param_v3_cmd_ctrl(): Payload[0]=0x%08x���vpm_apr_msg_handler.cpp:vpm_set_param_v3_cmd_ctrl(): Failed to validate calib payload: result: 0x%lx����vpm_apr_msg_handler.cpp:vpm_set_param_v3_cmd_ctrl(): Cannot get virtual address, mem_handle: 0x%08X, addr: lsw: 0x%08X, msw: 0x%08X�vpm_apr_msg_handler.cpp:CVD_CAL_MSG_PARAM: vpm_set_param_v3_cmd_ctrl(): Param ID[0]=0x%08x��vpm_apr_msg_handler.cpp:vpm_set_param_v3_cmd_ctrl(): set param payload has generic module params. not sending to dyn svc����vpm_apr_msg_handler.cpp:vpm_set_param_v3_cmd_ctrl(): Failed to send set param to dyn svcs, result: 0x%lx����vpm_apr_msg_handler.cpp:CVD_CAL_MSG_PARAM: vpm_set_param_v3_cmd_ctrl(): sent get_kpps to VPM����vpm_apr_msg_handler.cpp:CVD_CAL_MSG_PARAM: vpm_set_param_v3_cmd_ctrl(): sent reconfig to MVM����vpm_apr_msg_handler.cpp:CVD_CAL_MSG_PARAM: vpm_set_param_v3_cmd_ctrl(): COMPLETED, result: 0x%lx����vpm_apr_msg_handler.cpp:vpm_set_param_v3_cmd_ctrl(): Unexpected cmd seq state: 0x%lx����vpm_apr_msg_handler.cpp:vpm_get_param_v3_cmd_ctrl(): Unexpected payload size, %d != expected: %d����vpm_apr_msg_handler.cpp:vpm_get_param_v3_cmd_ctrl(): Invalid param data size, %d����vpm_apr_msg_handler.cpp:vpm_get_param_v3_cmd_ctrl(): Failed to allocate in-band get param rsp payload���vpm_apr_msg_handler.cpp:vpm_get_param_v3_cmd_ctrl(): Failed to validate calib payload: result: 0x%lx����vpm_apr_msg_handler.cpp:vpm_get_param_v3_cmd_ctrl(): Mis-aligned mem size: 0x%08X���vpm_apr_msg_handler.cpp:vpm_get_param_v3_cmd_ctrl(): Cannot get virtual address, mem_handle: 0x%08X, addr: lsw: 0x%08X, msw: 0x%08X�vpm_apr_msg_handler.cpp:vpm_get_param_v3_cmd_ctrl(): get param payload has generic module params. not sending to dyn svc����vpm_apr_msg_handler.cpp:CVD_CAL_MSG_PARAM: Sending GET_PARAM_V3 to dyn svcs. vpm_get_param_v3_cmd_ctrl(): Token: %d Param ID: 0x%08x, mem_size: %lu�vpm_apr_msg_handler.cpp:CVD_CAL_MSG_PARAM: vpm_get_param_v3_cmd_ctrl(): Failed to send get param msg to dyn svcs, result: 0x%lx�vpm_apr_msg_handler.cpp:CVD_CAL_MSG_PARAM: Sent GET_PARAM_V3 to dyn svcs. vpm_get_param_v3_cmd_ctrl(): MID: 0x%08x, PID: x%08x��vpm_apr_msg_handler.cpp:VPM: SET_VOICE_TIMING_CMD: Invalid payload size, opcode: 0x%08X, valid_size: %lu, actual_size: %lu��vpm_apr_msg_handler.cpp:VPM: SET_VOICE_TIMING_CMD: cannot be applied in RUN state���vpm_apr_msg_handler.cpp:vpm_get_hdvoice_config_cmd_ctrl(): Determining if HD Voice should be enabledNetwork: 0x%08X, TX PP SR: %d, RX PP SR: %d, TX voc op mode: 0x%08X, RX voc op mode: 0x%08X, Media ID: 0x%08X, Feature: 0x%08X��vpm_apr_msg_handler.cpp:vpm_get_hdvoice_config_cmd_ctrl(): Found the feature(0x%08x)Enable Mode: %d, RX PP SR: %d, TX PP SR: %d�vpm_apr_msg_handler.cpp:vpm_set_ui_property_v2_cmd_processing(): Unexpected payload size, %d < %d���vpm_apr_msg_handler.cpp:vpm_set_ui_property_v2_cmd_processing(): Invalid UI param data size, %d�vpm_apr_msg_handler.cpp:vpm_set_ui_property_v2_cmd_processing(): Invalid param data length %d > Max length %d���vpm_apr_msg_handler.cpp:vpm_set_ui_property_v2_cmd_processing(): Invalid payload size %d != %d��vpm_apr_msg_handler.cpp:vpm_set_ui_property_v2_cmd_processing(): Module Id 0x%08X / Param Id 0x%08X / instance Id 0x%08X received���vpm_apr_msg_handler.cpp:vpm_set_ui_property_v2_cmd_processing(): Reached Maximum cached entries %d��vpm_apr_msg_handler.cpp:vpm_set_ui_property_v2_cmd_processing(): Error caching Module id 0x%08X Param id 0x%08X Instance id 0x%08X��vpm_apr_msg_handler.cpp:vpm_set_ui_property_v2_cmd_processing(): Failed to send set param cmd to dyn svcs���vpm_apr_msg_handler.cpp:vpm_get_ui_property_v2_cmd_processing(): Unexpected payload size, %d != %d��vpm_apr_msg_handler.cpp:vpm_get_ui_property_v2_cmd_processing(): Invalid UI param data size, %d�vpm_apr_msg_handler.cpp:vpm_get_ui_property_v2_cmd_processing(): Failed to allocate rsp payload for Get UI prop cmdresult: 0x%lx����vpm_apr_msg_handler.cpp:CVD_CAL_MSG_PARAM: Sending GET_PARAM_V2 to VCP. vpm_get_ui_property_v2_cmd_processing(): Token=%d Param ID=0x%08x���vpm_apr_msg_handler.cpp:vpm_get_ui_property_v2_cmd_processing(): Failed to allocate in-band get param rsp payload���vpm_apr_msg_handler.cpp:vpm_get_ui_property_v2_cmd_processing(): Failed to send get param cmd to dyn svcs���vpm_apr_msg_handler.cpp:vpm_get_ui_property_v2_cmd_processing: Sent GET_PARAM_V2 to vpTx/Rx dyn svcsMID: 0x%08x, PID: 0x%08x, IID: 0x%08x ��vpm_response_handler.cpp:vpm_get_delay_cmd_rsp_handler(): vptx_algo_delay: %lu, afe_tx_port_and_hw_delay: %lu���vpm_response_handler.cpp:vpm_get_delay_cmd_rsp_handler(): vprx_algo_delay: %lu, afe_rx_port_and_hw_delay: %lu���vpm_response_handler.cpp:vpm_get_kpps_cmd_rsp_handler(): vptx_kpps = %d, vprx_kpps = %d, vptx_frame_size = %d us����vpm_response_handler.cpp:CVD_CAL_MSG_PARAM: vpm_get_param_v3_cmd_rsp_fwd(): Payload[0-2]=0x%08x, 0x%08x, 0x%08x�vpm_response_handler.cpp:CVD_CAL_MSG_PARAM: vpm_get_param_v3_cmd_rsp_fwd(): Payload[3]=0x%08x���vpm_response_handler.cpp:CVD_CAL_MSG_PARAM: vpm_get_param_v3_cmd_rsp_fwd(): Payload[0]=0x%08x���vpm_response_handler.cpp:CVD_CAL_MSG_PARAM: vpm_get_param_v3_cmd_rsp_fwd(): Get Param Response Token=%d�vpm_response_handler.cpp:vpm_get_param_v3_cmd_rsp_fwd(): Failed to send get param cmd ACK to client, result: 0x%lx��vpm_response_handler.cpp:CVD_CAL_MSG_PARAM: vpm_get_ui_prop_cmd_rsp_handler(): Get Param Response Token: %lu����vpm_response_handler.cpp:CVD_CAL_MSG_PARAM: vpm_get_ui_prop_cmd_rsp_handler(): Dyn svcs ack'd error: 0x%lx��vpm_response_handler.cpp:vpm_get_ui_prop_cmd_rsp_handler(): Failed to send get param cmd ACK to client, result: 0x%lx���vpm_response_handler.cpp:CVD_CAL_MSG_PARAM: vpm_get_ui_prop_v2_cmd_rsp_handler(): Get Param Response Token: %lu�vpm_response_handler.cpp:CVD_CAL_MSG_PARAM: vpm_get_ui_prop_v2_cmd_rsp_handler(): Dyn svcs ack'd error: 0x%lx���vpm_response_handler.cpp:vpm_get_ui_prop_v2_cmd_rsp_handler(): Failed to send get param cmd ACK to client, result: 0x%lx����vpm_response_handler.cpp:CVD_CAL_MSG_PARAM: vpm_get_param_v3_cmd_rsp_handler(): Get Param Response Token: %lu���vpm_response_handler.cpp:CVD_CAL_MSG_PARAM: vpm_get_param_v3_cmd_rsp_handler(): Dyn svcs ack'd error: 0x%lx�vpm_response_handler.cpp:vpm_get_param_v3_cmd_rsp_handler(): Failed to send get param cmd ACK to client, result: 0x%lx��vpm_response_handler.cpp:vpm_set_vp3_param_transition_rsp_fn(): Command failed with result:(0x%08X). Ignoring it.���vpm_response_handler.cpp:vpm_get_vp3_param_transition_rsp_fn(): Num of failed rsp:(%d), Num of getparam issued:(%d)�vpm_response_handler.cpp:VoiceProcMgr [0x%lx]: Received response for get param V3 cmd rsp_status: 0x%lx�vpm_session_cal_utils.cpp:vpm_helper_search_hdvoice_config(): Matched Entry Found with custom BWE config����vpm_session_cal_utils.cpp:vpm_calibrate_dynamic_with_linear_volume_mapping(): cvd_cal_query failed with result: 0x%08X for Handle: %d���vpm_session_cal_utils.cpp:vpm_calibrate_dynamic_with_volume_interpolation(): cvd_cal_query failed with result: 0x%08X for Handle: %d����vpm_session_dev_config_utils.cpp:vpm_verify_feature_config(): Invalid input parameter!��vpm_session_dev_config_utils.cpp:vpm_verify_sys_config(): Unmatching Column Value: 0x%016x with Column ID: 0x%08X, is_custom_feature(%d)����vpm_session_dev_config_utils.cpp:vpm_verify_custom_hdvoice_config_data(): Invalid Feature ID: 0x%08X����vpm_session_dev_config_utils.cpp:vpm_verify_custom_hdvoice_config_data(): Invalid Enable Mode: 0x%08X���vpm_session_dev_config_utils.cpp:vpm_verify_custom_hdvoice_config_data(): Invalid Rx Sampling Rate: 0x%08X��vpm_session_dev_config_utils.cpp:vpm_verify_custom_hdvoice_config_data(): Invalid Tx Sampling Rate: 0x%08X��vpm_session_dyn_svc_cfg_utils.cpp:vpm_send_reconfig_msg_to_dyn_svc(), Failed to get additional params for VpRx dyn svc creation, topo_id: 0x%lx�vpm_session_dyn_svc_cfg_utils.cpp:vpm_send_reconfig_msg_to_dyn_svc(), Failed to push msg buf to Rx dyn svc cmdQ, result: 0x%lx��vpm_session_dyn_svc_cfg_utils.cpp:vpm_send_reconfig_msg_to_dyn_svc(), Failed to push msg buf to Tx dyn svc cmdQ, result: 0x%lx��vpm_session_dyn_svc_cfg_utils.cpp:vpm_set_param_v3_to_dyn_svc(), FAILED to push msg buf to vpTx cmdQ, result: 0x%lx�vpm_session_dyn_svc_cfg_utils.cpp:vpm_set_param_v3_to_dyn_svc(), Send set param cmd to vpTx cmdQ, session_id: 0x%lx�vpm_session_dyn_svc_cfg_utils.cpp:vpm_set_param_v3_to_dyn_svc(), FAILED to create EliteMsg for vpTx cmdQ����vpm_session_dyn_svc_cfg_utils.cpp:vpm_set_param_v3_to_dyn_svc(): FAILED to push msg buf to vpRx cmdQ����vpm_session_dyn_svc_cfg_utils.cpp:vpm_set_param_v3_to_dyn_svc(), Send set param cmd to vpRx cmdQ, session_id: 0x%lx�vpm_session_dyn_svc_cfg_utils.cpp:vpm_set_param_v3_to_dyn_svc(): FAILED to create EliteMsg��vpm_session_dyn_svc_cfg_utils.cpp:vpm_reinit_dyn_svcs(): tx_port: 0x%04X, tx_top_id: 0x%08X, tx_pp_sr: %lu, ec_ref_port: 0x%04X, ec_mode: 0x%08X����vpm_session_dyn_svc_cfg_utils.cpp:vpm_reinit_dyn_svcs(): rx_port: 0x%04X, rx_topology_id: 0x%08X, rx_pp_sampling_rate: %lu, rx_ip_sampling_rate: %lu,is_forced_reinit(0/1): %u��vpm_session_dyn_svc_cfg_utils.cpp:vpm_reinit_dyn_svcs: FAILED to create EliteMsg!! 2�vpm_session_dyn_svc_cfg_utils.cpp:vpm_reinit_dyn_svcs: FAILED to push to vptx cmdQ. error %d!! 3�vpm_session_dyn_svc_cfg_utils.cpp:vpm_reinit_dyn_svcs(), set_ep_id for Tx failed with ack result: 0x%lx session_id: 0x%lx���vpm_session_dyn_svc_cfg_utils.cpp:vpm_update_additional_create_params(): Num Rx channels (%d)���vpm_session_dyn_svc_cfg_utils.cpp:vpm_update_additional_create_params(): Num EC ref channels (%d)���vpm_session_state_ctrl.cpp:vpm_state_reset(): CVP_GOAL_ENUM_CREATE, failed to request clocks with rc(%d)����vpm_session_state_ctrl.cpp:vpm_state_reset(): CVP_GOAL_ENUM_CREATE, failed to register VOICE ACTIVITY EVENT�vpm_session_state_ctrl.cpp:vpm_state_reset(): CVP_GOAL_ENUM_CREATE, failed to release clocks with rc(%d)����vpm_session_state_ctrl.cpp:vpm_action_create_vocproc(): tx_port: 0x%04X, tx_top_id: 0x%08X, tx_pp_sr: %lu,rx_port: 0x%04X, rx_top_id: 0x%08X, rx_pp_sr: %lu�vpm_session_state_ctrl.cpp:VPM: ACTION_SET_VOICE_TIMING: Failed to allocate param payload���vpm_session_state_ctrl.cpp:vpm_action_set_voice_timing: vsid: 0x%08X, vfr_mode: %d, vfr_cycle_us: %d,vptx_buf_start_us: %d, vptx_proc_start_us: %d, vptx_delivery_us: %d,enc_offset_us: %d, vprx_delivery_us: %d����vpm_session_state_ctrl.cpp:VPM: ACTION_SET_VOICE_TIMING: Failed to send VFR and TIMING param msg to VpTx����vpm_session_state_ctrl.cpp:VPM: ACTION_SET_VOICE_TIMING: Failed to send VFR and TIMING param msg to VpRx����vpm_session_utils.cpp:vpm_update_device_active_set() failed, NULL session object����vpm_session_utils.cpp:vpm_enable_cmd_ctrl(): INVALID AFE PORTS!!����vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param(): Invalid param size.���vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param(): #Mic Channels %d��vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param(): Invalid params: #Mic Channels %d �vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param(): #Speaker Channels %d��vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param(): Invalid params: #speaker Channels %d �vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param(): #EC_REF Channels %d���vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param(): Invalid params: #ec ref Channels %d ��vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param_v2(): Invalid param size.����vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param_v2(): #Mic Channels %d���vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param_v2(): Invalid params: #Mic Channels %d ��vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param_v2(): #speaker Channels %d���vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param_v2(): Invalid params: #speaker Channels %d ��vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param_v2(): #EC_REF Channels %d����vpm_session_utils.cpp:vpm_parse_generic_module_id_params_and_set_param_v2(): Invalid params: #ec ref Channels %d ���vsm_actions.cpp:vsm_action_playback_set_system_config: cmd issued count %d, resp count %d 4��vsm_actions.cpp:VSM: ACTION_SET_VOICE_TIMING: failed to allocate memory for set_param...����vsm_actions.cpp:VSM: ACTION_SET_VOICE_TIMING: FAILED to create EliteMsg session_port0x%X )����vsm_actions.cpp:VSM: ACTION_SET_VOICE_TIMING: Unable to push to venc cmdQ, error = %d!! 5����vsm_actions.cpp:VSM: ACTION_SET_VOICE_TIMING: FAILED to create EliteMsg, session_port 0x%X)�vsm_actions.cpp:VSM: ACTION_SET_VOICE_TIMING: Unable to push to vdec cmdQ, error = %d!! 6����vsm_actions.cpp:VSM: ACTION_SET_VOICE_TIMING: cmd issued count %d, resp count %d 7���vsm_actions.cpp:vsm_action_set_tx_rx_mute: direction %d, tx_ramp_ms: %d, rx_ramp_ms: %d, tx_mute_flag: %d, rx_mute_flag: %d�vsm_actions.cpp:VSM: ACTION_SET_PKTEXG_MODE: mode %d 8��vsm_actions.cpp:VSM: ACTION_SET_PKTEXG_MODE: FAILED to create EliteMsg!! 9���vsm_actions.cpp:VSM: ACTION_SET_PKTEXG_MODE: FAILED to push to venc cmdQ. error %d!! 10���vsm_actions.cpp:VSM: ACTION_SET_PKTEXG_MODE: FAILED to push to vdec cmdQ. error %d!! 11���vsm_actions.cpp:VSM: ACTION_SET_PKTEXG_MODE: cmd issued count %d, resp count %d 12����vsm_actions.cpp:VSM: SET_ENC_OPERATING_MODE: cached mode 0x%x, bandwidth 0x%x���vsm_actions.cpp:VSM: ACTION_SET_CHANNEL_AWARENESS: is_enabled[0x%x] fec_offset[0x%x] fer_rate[0x%x]�vsm_actions.cpp:VSM: SET_MINMAX_RATE: cached min_rate 0x%x, max_rate 0x%x���vsm_actions.cpp:VSM: ACTION_SET_RATE_MODULATION: cached reduced rate mode 0x%x��vsm_actions.cpp:VSM: ACTION_SET_DTX_MODE: cached DTX value 0x%x�vsm_actions.cpp:VSM: ACTION_SET_CACHED_PROPs: cmd issued count %d, resp count %d 13���vsm_actions.cpp:VSM: LISTEN_CLASS_EVS_BANDWIDTH_CHANGE: not yet set by vocoder while stream is running.�vsm_actions.cpp:VSM: ACTION_SEND_IAVSYNC_RX_PATH_DELAY: Client Addr(0x%04X) Port(0x%04X), rx_path_delay_us: %d��vsm_actions.cpp:vsm_action_reconfig_tx_mixer: active_tx_sr: %d, requested_var_voc_tx_sr: %d cmd issued count: %d, resp count: %d����vsm_actions.cpp:VSM: Error[0x%08x]��vsm_actions.cpp:VSM: TX_INBAND_PKTEXG: data_size:%d�vsm_actions.cpp:VSM: RX_INBAND_PKEEXG: qurt_elite_queue_push_back error = %d!! 14�vsm_actions.cpp:VSM: TX_OOB_PKTEXG: data_size=%d����vsm_actions.cpp:VSM: RX_OOB_PKTEXG: invalid payload_size=0x%x���vsm_actions.cpp:VSM: RX_OOB_PKTEXG: data_size:%d����vsm_actions.cpp:VSM: RX_OOB_PKTEXG: qurt_elite_queue_push_back error = %d!! 15����vsm_actions.cpp:VSM: TX_MAILBOX_PKTEXG: txWriteOffset=%d, txReadOffset=%d���vsm_actions.cpp:VSM: TX_MAILBOX_PKTEXG: Client error: No pending encoder request.Dropping encoder packet.���vsm_actions.cpp:VSM: TX_MAILBOX_PKTEXG: Client error: Failed to get encoder buffer, rc = 0x%08X. Dropping encoder packet.���vsm_actions.cpp:VSM: TX_MAILBOX_PKTEXG: data_size=%d����vsm_actions.cpp:VSM: RX_MAILBOX_PKTEXG: rxWriteOffset=%d, rxReadOffset=%d���vsm_actions.cpp:VSM: RX_MAILBOX_PKTEXG: Client error: No pending request.���vsm_actions.cpp:VSM: RX_MAILBOX_PKTEXG: Client error: Failed to get decoder buffer, rc = 0x%08X.����vsm_actions.cpp:VSM: RX_MAILBOX_PKTEXG: data_size=%d����vsm_actions.cpp:VSM: RX_MAILBOX_PKTEXG: qurt_elite_queue_push_back error = %d!! 16����vsm_actions.cpp:VSM: RX_MAILBOX_PKTEXG: vsm_action_send_dtmf_gen_msg_to_afe:FAILED to create EliteMsg!! 17����vsm_actions.cpp:VSM: RX_MAILBOX_PKTEXG: vsm_action_send_dtmf_gen_msg_to_afe:total rx delay: %d!! 18���vsm_actions.cpp:VSM: RX_MAILBOX_PKTEXG: vsm_action_send_dtmf_gen_msg_to_afe:sending DTMF gen msg to port: %d!! 19�vsm_actions.cpp:VSM: RX_MAILBOX_PKTEXG: vsm_action_send_dtmf_gen_msg_to_afe:FAILED to push to afe cmdQ. error %d!! 20�vsm_session_cmd_handler.cpp:VSM_session_cmdQ_aprpkt_handler: Command failed opcode 0x%8X, port 0x%8X����vsm_session_cmd_handler.cpp: VSM_create_session_cmd_control: failed to request clocks with rc().���vsm_session_cmd_handler.cpp: VSM_create_session_cmd_control: failed to revert clocks with rc().����vsm_session_cmd_handler.cpp:VSM_set_ui_property_cmd_control(): Invalid version. fail_count %d���vsm_session_cmd_handler.cpp:VSM_set_ui_property_cmd_control(): Reached Maximum cached entries %d fail_count %d��vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control(): session_portID = 0x%08X���vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control(): Unexpected payload size, %d < %d��vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control(): Invalid param data size, %d���vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control(): Invalid param data length %d > Max length %d��vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control(): Invalid payload size %d != %d�vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control(): Invalid version. fail_count=%d����vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control(): Module Id 0x%08X / Param Id 0x%08X instance Id 0x%08X received ���vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control(): Reached Maximum cached entries %d fail_count %d���vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control(): Error caching Module id 0x%08X Param id 0x%08X instance id 0x%08X�vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control(): set_param error: %d.��vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control: command FAILED:.����vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control: command Success:.���vsm_session_cmd_handler.cpp:VSM_set_ui_property_v2_cmd_control: ERROR: Unexpected...����vsm_session_cmd_handler.cpp:VSM_get_ui_property_v2_cmd_control(): session_portID = 0x%08X���vsm_session_cmd_handler.cpp:VSM_get_ui_property_v2_cmd_control(): Unexpected payload size, %d != %d�vsm_session_cmd_handler.cpp:VSM_get_ui_property_v2_cmd_control(): Invalid param data size, %d���vsm_session_cmd_handler.cpp: VSM_get_ui_property_v2_cmd_control(): module ID= 0x%08X Param ID=0x%08X instance ID=0x%08X�vsm_session_cmd_handler.cpp:VSM_get_ui_property_v2_cmd_control: failed to allocate memory for get_param payload...��vsm_session_cmd_handler.cpp:VSM_get_ui_property_v2_cmd_control: command FAILED:.����vsm_session_cmd_handler.cpp:VSM_get_ui_property_v2_cmd_control: command Success:.���vsm_session_cmd_handler.cpp:VSM_get_ui_property_v2_cmd_control: ERROR: Unexpected...����vsm_session_cmd_handler.cpp:VSM: SET_AVSYNC_DELAYS: session_portID = 0x%08X�vsm_session_cmd_handler.cpp:VSM: SET_AVSYNC_DELAYS: invalid payload size. %d����vsm_session_cmd_handler.cpp:VSM: SET_AVSYNC_DELAYS: tx_delay_us = %d us, rx_delay_us = %d us ���vsm_session_cmd_handler.cpp:VSM: SET_AVSYNC_DELAYS: total_voice_tx_path_delay = %d Us, total_voice_rx_path_delay = %d us����vsm_session_cmd_handler.cpp:VSM_stream_set_enc_rate_cmd_control():session_portID = 0x%08X, ENC rate received = %d���vsm_session_cmd_handler.cpp:VSM_stream_set_enc_rate_cmd_control(): command allowed for full control client only. client_src_port: 0x%04X, full_control_src_port: 0x%04X�vsm_session_cmd_handler.cpp:VSM_stream_set_min_max_rate_cmd_control(): session_portID = 0x%08X, current_action %d���vsm_session_cmd_handler.cpp:VSM_stream_set_min_max_rate_cmd_control: ERROR: Unexpected...���vsm_session_cmd_handler.cpp:VSM: IPKTEXG_CMD_SET_MODE: sessionPortID: 0x%08X, current_action %d�vsm_session_cmd_handler.cpp:VSM: IPKTEXG_CMD_SET_MODE: Client is passive, src_port: 0x%04X��vsm_session_cmd_handler.cpp:VSM: IPKTEXG_CMD_SET_MODE: Stream is in RUN_STATE.��vsm_session_cmd_handler.cpp:VSM: IPKTEXG_CMD_SET_MODE: Invalid PKTEXG_MODE:0x%08X���vsm_session_cmd_handler.cpp:VSM: IPKTEXG_CMD_SET_MODE: command FAILED:.�vsm_session_cmd_handler.cpp:VSM: IPKTEXG_CMD_SET_MODE: ERROR: Unexpected...�vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: session_portID = 0x%08X, current_action %d�vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Client is passive, src_port: 0x%04X.���vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Client error: Stream is running.���vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Packet exchange mode is not OOB.���vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Invalid enc (%d) or dec (%d) buffer size.��vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Invalid mem_handle: 0x%08X.����vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Mis-aligned enc_buf_addr: 0x%016X.�vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Mis-aligned dec_buf_addr: 0x%016X��vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Mis-aligned enc_buf_size: %d.��vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Mis-aligned dec_buf_size: %d.��vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Memory is not within range, mem_handle: 0x%08X, enc_buf_addr: 0x%016X, enc_buf_size: %d.���vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Memory is not within range, mem_handle: 0x%08X, dec_buf_addr: 0x%016X, dec_buf_size: %d.���vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Cannot get virtual address, mem_handle: 0x%08X, enc_buf_addr: 0x%016X.�vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Cannot get virtual address, mem_handle: 0x%08X, dec_buf_addr: 0x%016X.�vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: Cannot get vsm_mem_handle for cvd_mem_handle: 0x%08X.��vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: enc_buf_addr_lsw: 0x%08X, enc_buf_addr_msw: 0x%08X, enc_buf_size: 0x%08X���vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: dec_buf_addr_lsw: 0x%08X, dec_buf_addr_msw: 0x%08X, dec_buf_size: 0x%08X���vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: vsm_mem_handle: 0x%08X.����vsm_session_cmd_handler.cpp:VSM: SET_OOB_CONFIG: command result=%d��vsm_session_cmd_handler.cpp:VSM: SET_MAILBOX_CONFIG: Client is passive, src_port: 0x%04X.���vsm_session_cmd_handler.cpp:VSM: SET_MAILBOX_CONFIG: Client error: Stream is running.���vsm_session_cmd_handler.cpp:VSM: SET_MAILBOX_CONFIG: Packet exchange mode is not MAILBOX.���vsm_session_cmd_handler.cpp:VSM: SET_MAILBOX_CONFIG: Invalid mem_handle: 0x%08X.����vsm_session_cmd_handler.cpp:VSM: SET_MAILBOX_CONFIG: Mis-aligned tx_circ_buf_mem_address: MSW:(0X%08X) LSW:(0X%08X)�vsm_session_cmd_handler.cpp:VSM: SET_MAILBOX_CONFIG: Memory is not within range, mem_handle: 0x%08X, tx_circ_buf mem_address: MSW:(0X%08X) LSW:(0X%08X), mem_size:(%d)��vsm_session_cmd_handler.cpp:VSM: SET_MAILBOX_CONFIG: Tx circular buffer data size %d is not a multiple of an encoding request size.�vsm_session_cmd_handler.cpp:VSM: SET_MAILBOX_CONFIG: Cannot get virtual address, mem_handle: 0x%08X, tx_circ_buf mem_address: MSW:(0X%08X) LSW:(0X%08X)�vsm_session_cmd_handler.cpp:VSM: SET_MAILBOX_CONFIG: Memory is not within range, mem_handle: 0x%08X, rx_circ_buf mem_address: MSW:(0X%08X) LSW:(0X%08X), mem_size:(%d)��vsm_session_cmd_handler.cpp:VSM: SET_MAILBOX_CONFIG: Cannot get virtual address, mem_handle: 0x%08X, rx_circ_buf mem_address: MSW:(0X%08X) LSW:(0X%08X)�vsm_session_cmd_handler.cpp:VSM: SET_MAILBOX_CONFIG: mem_handle: 0x%08X, rx_circ_buf mem_address:(0X%08X), rx_mem_size:(%d), tx_circ_buf mem_address:(0X%08X), tx_mem_size:(%d)�vsm_session_cmd_handler.cpp:VSM: SET_MAILBOX_CONFIG: command result=%d��vsm_session_cmd_handler.cpp:VSM: GET_VOC_PROPERTIES: Client error: Media type has not been set yet.�vsm_session_cmd_handler.cpp:VSM: GET_VOC_PROPERTIES: Failed to get vocoder packet size, rc = 0x%08X�vsm_session_cmd_handler.cpp:VSM: GET_VOC_PROPERTIES: command result=%d��vsm_session_cmd_handler.cpp:VSM_ittyoob_cmd_register_cmd_control(): Registered: Client Addr: %04x, Client Port: %04x����vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control(): session_portID = 0x%08X, current_action %d�vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control(): Unexpected payload size, %d < %d����vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control(): Invalid param data size, %d�vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control(): Unexpected payload size, %d != %d���vsm_session_cmd_handler.cpp: VSM_set_param_v3_cmd_control(): Param ID[0]=0x%08x Instance ID[0]=0x%08x���vsm_session_cmd_handler.cpp: VSM_set_param_v3_cmd_control(): Payload[0-2]=0x%08x, 0x%08x, 0x%08x����vsm_session_cmd_handler.cpp: VSM_set_param_v3_cmd_control(): Payload[3]=0x%08x��vsm_session_cmd_handler.cpp: VSM_set_param_v3_cmd_control(): Payload[0]=0x%08x��vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control(): Invalid mem_handle: 0x%08X.�vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control(): Mis-aligned mem address: lsw: 0x%08X, msw: 0x%08X���vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control(): Memory is not within range, mem_handle: 0x%08X, addr: lsw: 0x%08X, msw: 0x%08X, size: %d����vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control(): Cannot get virtual address, mem_handle: 0x%08X, addr: lsw: 0x%08X, msw: 0x%08X��vsm_session_cmd_handler.cpp: VSM_set_param_v3_cmd_control(): memory mapping not done. vsm_memory_map_client: %d�vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control(): set_param error: %d.����vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control: GET KPPS failed....���vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control: command FAILED:.��vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control: command Success:.�vsm_session_cmd_handler.cpp:VSM_set_param_v3_cmd_control: ERROR: Unexpected...��vsm_session_cmd_handler.cpp:VSM_get_param_v3_cmd_control(): session_portID = 0x%08X, current_action %d�vsm_session_cmd_handler.cpp:VSM_get_param_v3_cmd_control(): Invalid param data size, %d�vsm_session_cmd_handler.cpp:VSM_get_param_v3_cmd_control: failed to allocate memory for get_param payload...����vsm_session_cmd_handler.cpp:VSM_get_param_v3_cmd_control(): Invalid mem_handle: 0x%08X.�vsm_session_cmd_handler.cpp:VSM_get_param_v3_cmd_control(): Mis-aligned mem address: lsw: 0x%08X, msw: 0x%08X���vsm_session_cmd_handler.cpp:VSM_get_param_v3_cmd_control(): Mis-aligend mem size: 0x%08X����vsm_session_cmd_handler.cpp:VSM_get_param_v3_cmd_control(): Memory is not within range, mem_handle: 0x%08X, addr: lsw: 0x%08X, msw: 0x%08X, size: %d����vsm_session_cmd_handler.cpp:VSM_get_param_v3_cmd_control(): Cannot get virtual address, mem_handle: 0x%08X, addr: lsw: 0x%08X, msw: 0x%08X��vsm_session_cmd_handler.cpp:VSM_get_param_v3_cmd_control: Error! Failed to get virtual address with result %d!��vsm_session_cmd_handler.cpp:VSM_get_param_v3_cmd_control: command FAILED:.��vsm_session_cmd_handler.cpp:VSM_get_param_v3_cmd_control: command Success:.�vsm_session_cmd_handler.cpp:VSM_get_param_v3_cmd_control: ERROR: Unexpected...��vsm_session_cmd_handler.cpp:VSM: LISTEN_EAMR_MODE_CHANGE: Client has already registered.����vsm_session_cmd_handler.cpp:VSM: LISTEN_EAMR_MODE_CHANGE client's Addr(0x%04X) Port(0x%04X)�vsm_session_cmd_handler.cpp:VSM: LISTEN_EVS_BANDWIDTH_CHANGE: Client has already listened.��vsm_session_cmd_handler.cpp:VSM: LISTEN_EVS_BANDWIDTH_CHANGE client's Addr(0x%04X) Port(0x%04X)�vsm_session_cmd_handler.cpp:VSM: LISTEN_IAVSYNC_CLASS_TX: Client has already registered�vsm_session_cmd_handler.cpp:VSM: LISTEN_IAVSYNC_CLASS_RX client's Addr(0x%04X) Port(0x%04X)�vsm_session_cmd_handler.cpp:VSM: LISTEN_IAVSYNC_CLASS_TX: Client has already registered.����vsm_session_cmd_handler.cpp:VSM: LISTEN_IAVSYNC_CLASS_TX: client's Addr(0x%04X) Port(0x%04X)����vsm_session_response_handler.cpp:VSM_session_respQ_set_param_msg_handler: received response token 0x%X result 0x%X�vsm_session_response_handler.cpp:VSM_utility_get_kpps_response_handler: received response enc kpps %d, dec kpps %d, dec_pp kpps %d, is_kpps_changed %d��vsm_session_response_handler.cpp:VSM: GET_AVSYNC_DELAY_RSP_HANDLER: enc_algo_delay = %d us, dec_algo_delay = %d us��vsm_session_response_handler.cpp:VSM: EVENT_VOCODER_OPERATING_MODE: direction = (%d), mode = (0x%08x), session_direction %d, resp_result = 0x%X, resp_pending = %d��vsm_session_response_handler.cpp:VSM_utility_set_system_config_apr_response_handler: received response token 0x%X ��vsm_session_response_handler.cpp:cvs_stream_update_afe_port_info_processing(): Unexpected payload size, %d != %d����vsm_svc.cpp:VSM: apr_callback_fn: fail to get response queue rc = %d����vsm_svc.cpp:VSM:(0x%X) received response/event opcode:(0x%lx)���vsm_svc.cpp:VSM: VSM_EVT_REQ_DEC_PACKET�vsm_svc.cpp:VSM: IPKTEXG_EVT_OOB_ENC_BUFFER_CONSUMED port=0x%X��vsm_svc.cpp:VSM: VSM_EVT_SEND_ENC_PACKET����vsm_svc.cpp:VSM: svc_respQ_aprpkt_handler: Command failed opcode 0x%8X, port 0x%8X, error %d����vsm_svc.cpp:VSM: Error[0x%08x]��vsm_svc.cpp:VSM: ENC_PACKET_READY_EVENT: Invalid payload size: %d < %d��vsm_utilities.cpp:VSM: VFR_CONFIG: VSID: 0x%08X, VFR mode: %d, vfr_cycle_us: %d ���vsm_utilities.cpp:VSM: VOICE_TIMING_OFFSETS: enc_offset: %d, dec_req_offset: %d, dec_offset = %d, vptx_delivery_offset =%d��vsm_utilities.cpp:vsm_utility_initialize_session_variables: ERROR, unexpected direction...��vsm_utilities.cpp:vsm_utility_initialize_session_variables: ERROR, input truncation�vsm_utilities.cpp:vsm_utility_validate_ui_prop_version():rc %d cached_version %d new_version %d�vsm_utilities.cpp:VSM: Circular buffer empty����vsm_utilities.cpp:VSM: Client error: Write offset %d is not a multiple of request size %d.��vsm_utilities.cpp:VSM: Client error: Write offset %d is at or beyond the end of the circular buffer. Total circular buffer size for holding request is %d.��vsm_utilities.cpp:VSM: Client error: Read offset %d is corrupted by client, which is at or beyond the end of the circular buffer. Total circular buffer size for holding request is %d.�vsm_utilities.cpp:VSM: Client error: Mis-aligned encoder packet buffer mem_address: MSW:(0X%08X) LSW:(0X%08X)���vsm_utilities.cpp:VSM: Client error: Mis-aligned encoder packet buffer size: %d.����vsm_utilities.cpp:VSM: Client error: Encoder packet buffer size %d not large enough to hold max encoder packet size %d.�vsm_utilities.cpp:VSM: Client error: Encoder packet buffer is not within range, mem_handle: 0x%08X, addr: 0x%016X, size: %d.����vsm_utilities.cpp:VSM: Cannot get virtual address, mem_handle: 0x%08X, addr_MSW:(0X%08X) addr_LSW:(0X%08X)��vsm_utilities.cpp:VSM: Client error: Mis-aligned decoder packet buffer mem_address: MSW:(0X%08X) LSW:(0X%08X)���vsm_utilities.cpp:VSM: Client error: Decoder packet buffer is not within range, mem_handle: 0x%08X, addrMSW:(0X%08X) addrLSW:(0X%08X), size: %d.����vsm_utilities.cpp:VSM: Client error: Invalid decoder packet buffer mem size %d < decoder packet header size %d.�vsm_utilities.cpp:VSM: Cannot get virtual address, mem_handle: 0x%08X, addr: 0x%016X.���vsm_utilities.cpp:VSM: Client error: Unsupported decoder packet minor version %d. Supported minor version is 0. ����vsm_utilities.cpp:VSM: Client error: Invalid decoder packet media ID 0x%08X. Media ID configured on the stream is 0x%08X. ��vsm_utilities.cpp:VSM: Client error: Decoder packet data size %d does not fit within the decoder packet buffer of size %d.��vsm_utilities.cpp:VSM: vsm_utility_get_no_data_frame_header_type error: improper media format %d provided ��vsm_utilities.cpp:VSM: vsm_utility_log_dtmf_mailbox_pkt_gen_no_data_pkt error: couldnt update frame header �mvm_ccm.c:mvm_ccm_add_voice_session(): MVM:(0x%08X) successfully added��mvm_ccm.c:mvm_ccm_add_voice_session(): MVM:(0x%08X) ALREADY added ��mvm_ccm.c:mvm_ccm_remove_voice_session(): MVM:(0x%08X)��mvm_ccm.c:mvm_csm_update_sleep_manager(): CSM_enable_flag: %d,voting_devoting_latency_us: %d, safety_margin: %d�mvm_ccm.c:mvm_csm_update_sleep_manager(): Dynamic voting-devoting is disabled for the current configuration�mvm_ccm.c:mvm_ccm_init():Failed to create CSM timers with rc=(0x%08x)���mvm_ccm.c:mvm_ccm_commit_system_config(): Cannot compute clock and bus configuration for internal topology usecase rc = 0x%08X��mvm_ccm.c:custom topology���mvm_ccm.c:mvm_ccm_commit_system_config(): Cannot compute clock and bus configuration for custom topology usecase rc = 0x%08X����mvm_ccm.c:mvm_ccm_commit_system_config(): num_clock_levels = %d�mvm_ccm.c:mvm_ccm_commit_system_config(): CLOCK_NPA_QUERY_PERF_LEVEL_KHZ[%d] = %d���mvm_ccm.c:mvm_ccm_compute_topo_clock_and_bw(): No scale factors, use defaults���mvm_ccm.c:mvm_ccm_compute_topo_clock_and_bw(): mpps_scale_factor %d/10, bw_scale_factor %d/10���mvm_ccm.c:mvm_ccm_compute_topo_clock_and_bw(): clock_hz %d, cycles_per_thousand_instr_packets %d, total_kpps %d�mvm_ccm.c:mvm_ccm_compute_topo_clock_and_bw(): clock_hz %d before mapping���mvm_ccm.c:mvm_ccm_compute_topo_clock_and_bw(): clock_hz %d after mapping����mvm_ccm.c:mvm_ccm_compute_topo_clock_and_bw(): BW [MSB=0x%x, LSB=0x%08x] bps, usage percentage %d���mvm_ccm.c:mvm_ccm_compute_topo_clock_and_bw(): clock_hz %d, sleep_latency_us %d�mvm_ccm.c:mvm_ccm_broadcast_configuration(): mvm_handle=0x%08x��mvm_ccm.c:mvm_csm_update_sleep_manager(): multiple sessions detected����mvm_module.c:MVM: VOICE_SETUP: current seq_state=(%d), seq_status=(0x%08x)��mvm_module.c:MVM: VOICE_SETUP: cmd status=(0X%08X)��mvm_module.c:mvm_obj_stat(): Objects used=(%d)��mvm_module.c:MVM: CMDID=(0X%08X) UNSUPPORTED����mvm_module.c:mvm_mem_alloc_object(): ObjectsLeft=(%d)���mvm_module.c:MVM: STATE_RESET_ENTRY: last goal-->action failed with result=0x%08X���mvm_module.c:MVM:(0x%08X) STATE: %d GOAL: %d ACTION: %d UNEXPECTED���mvm_module.c:MVM: STATE_INIT_ENTRY: last goal-->action failed with result=0x%08X����mvm_module.c:MVM: ACTION_UNSUBSCRIBE_VTM: already unsubscribed��mvm_module.c:MVM: Error[0x%08x]�mvm_module.c:MVM: VOCPROC_GROUP_WAIT: OPCODE:0x%08X STATUS:0x%08X���mvm_module.c:MVM: ACTION_SUBSCRIBE_VTM: already subscribed for VFR��mvm_module.c:MVM: ACTION_SUBSCRIBE_TO_VTM: vfr_start_reference_us: MSW:(%d) LSW:(%d)����mvm_module.c:MVM: EVALUATE_TIMING_PARAMS: vfr_offset_from cdrx:(%d), txRefTime_offset:(%d), rxRefTime_offset:(%d)���mvm_module.c:MVM: EVALUATE_TIMING_PARAMS: enc_offset:(%d) dec_req_offset:(%d) dec_offset:(%d)���mvm_module.c:mvm_action_get_hdvoice_config(): MediaID = %08x, NetworkID = %08x, Rx op mode = %08x, Tx op mode = %08x����mvm_module.c:MVM: GET_HDVOICE_RSP: previous_feature:0x%08X, current_feature:0x%08X��mvm_module.c:mvm_determine_target_sampling_rates(): Invalid Rx Sampling Rate %d or Tx Sampling Rate %d��mvm_module.c:mvm_action_set_system_config_to_vocprocs: Network: 0x%08X, Media ID: 0x%08X, Tx voc op mode: 0x%08X, Rx voc op mode: 0x%08X,Feature: 0x%08X, TX PP SR: %d, RX PP SR: %d����mvm_module.c:mvm_streams_group_wait_transition_result_rsp_fn(): received response from stream session 0x%08x ���mvm_module.c:MVM: SIMPLE_SELF_DESTRUCT: OPCODE:0x%08X STATUS:0x%08X�mvm_module.c:MVM: STREAM_SET_SYSTEM_CONFIG: Network: 0x%08X, Media ID: 0x%08X���mvm_module.c:MVM: STREAM_SET_SYSTEM_CONFIG: Tx voc op mode: 0x%08X, Rx voc op mode: 0x%08X��mvm_module.c:MVM: STREAM_SET_SYSTEM_CONFIG: Feature:0x%08X. ENC PP SR: %d, DEC PP SR: %d����mvm_module.c:MVM: VOICE_PROCESSING_DELAYS: vptx_kpps: %d, enc_kpps:%d, dec_kpps:%d, vprx_kpps:%d, total_core_kpps:%d ���mvm_module.c:mvm_calculate_processing_times(): enc processing time %d us exceeds 20ms���mvm_module.c:mvm_calculate_processing_times(): dec processing time %d us exceeds 20ms���mvm_module.c:mvm_calculate_processing_times(): vp_tx processing time %d us exceeds %d ms����mvm_module.c:mvm_calculate_processing_times(): vp_rx processing time %d us exceeds 20ms�mvm_module.c:MVM: VOICE_PROCESSING_DELAYS: enc_proc_delay:%d us, dec_proc_delay:%d us, vptx_proc_delay:%d us, vprx_proc_delay:%d us�mvm_module.c:MVM: VOICE_TIMING_OFFSETS: vfr_mode: %d, vfr_cycle_duration: %d us, tx_proc_time_per_vfr_cycle(adjusted): %d us, rx_proc_time_per_frame: %d us, vptx_frame_size: %d us�mvm_module.c:MVM: VOICE_TIMING_OFFSETS: vptx_buf_start_offset:(%d), vptx_proc_start_offset:(%d), vptx_delivery_offset:(%d), enc_offset:(%d), dec_req_offset:(%d), dec_offset:(%d), vprx_delivery_offset:(%d) ���mvm_module.c:MVM: STATE_VOCPROC_RUN_ENTRY: last goal-->action failed with result=0x%08X�mvm_module.c:mvm_vocprocs_get_avsync_delays_group_wait_transition_rsp_fn(): total_afe_and_vptx_algo_delay = %d, total_afe_and_vprx_algo_delay = %d��mvm_module.c:MVM: CALCULATE_PATH_DELAYS: voice_tx_path_delay(excluding enc algo delay): %d us, voice_rx_path_delay(excluding dec algo delay): %d us�mvm_module.c:mvm_action_stream_set_avsync_delays(): Attached stream count=(%d)��mvm_module.c:MVM: STATE_STREAM_RUN_ENTRY: last goal-->action failed with result=0x%08X��mvm_module.c:MVM: STATE_RUN_ENTRY: last goal-->action failed with result=0x%08X�mvm_module.c:mvm_mem_free_object(): ObjectsLeft=(%d)����mvm_module.c:MVM: avtimerTimestamp_us: MSW: 0x%08X, LSW: 0x%08X,qtimerTimestamp_us: MSW: 0x%08X, LSW: 0x%08X,avtimerTimestamp - qtimerTimestamp_us: %d��mvm_module.c:MVM: VSS_ISTREAM_EVT_OPERATING_MODE_UPDATE: payload size, %d != %d�mvm_module.c:MVM: VSS_ISTREAM_EVT_OPERATING_MODE_UPDATE: Invalid Rx mode 0x%08X or Tx vocoder op mode 0x%08X.���mvm_module.c:MVM: VSS_ISTREAM_EVT_OPERATING_MODE_UPDATE: UNCHANGED��mvm_module.c:MVM: VSS_ISTREAM_EVT_OPERATING_MODE_UPDATE: Rx mode 0x%08X Tx mode 0x%08X.�mvm_module.c:MVM: VSS_ICCM_EVT_ACTIVE_SESSIONS: payload size, %d != %d��mvm_module.c:mvm_toggle_csm_evt_control(): Unexpected payload size, %d != %d, Dropping event packet.����mvm_module.c:mvm_toggle_csm_evt_control(): status %d����mvm_module.c:mvm_csm_request_vote_cmd_control(): Unexpected payload size, %d != %d, Dropping cmd packet.����mvm_module.c:MVM: PROCESS_GATING_COMMANDs: OPCODE:(0X%08X) STARTED��mvm_module.c:MVM: PROCESS_GATING_COMMANDs: OPCODE:(0X%08X) ENDED����mvm_module.c:MVM: CREATE_SESSION: Failed to create lock, rc = (0x%08x)��mvm_module.c:MVM: ACTION_OPEN_AVTIMER: FAILED with rc=(0x%08X)��mvm_module.c:MVM: DESTROY_SESSION: status=(%d)��mvm_module.c:MVM: ACTION_CLOSE_AVTIMER: FAILED with rc=(0x%08X)�mvm_module.c:mvm_attach_stream_cmd_control(): STREAM[0x%08X] already attached���mvm_module.c:mvm_attach_stream_cmd_control(): current seq_state=(%d), seq_status=(0x%08x)���mvm_module.c:mvm_attach_stream_cmd_control(): MVM[0x%08X] stream[0x%08X] attach rc = (0x%08X)���mvm_module.c:mvm_detach_stream_cmd_control(): current seq_state=(%d), seq_status=(0x%08x)���mvm_module.c:MVM: DETACH_STREAM: seq_state=(%d), seq_status=(0x%08x)����mvm_module.c:MVM:[0x%08X] DETACH_STREAM:[0x%08X] rc:[0x%08X]����mvm_module.c:mvm_attach_vocproc_cmd_control(): VOCPROC[0x%08X] already attached�mvm_module.c:MVM: ATTACH_VOCPROC: seq_state=(%d), seq_status=(0x%08x)���mvm_module.c:MVM: ATTACH_VOCPROC:[0x%08X] completed with status:[0x%08X]����mvm_module.c:mvm_detach_vocproc_cmd_control(): current seq_state=(%d), seq_status=(0x%08x)��mvm_module.c:mvm_detach_vocproc_cmd_control(): vocproc[0x%08X] detach MVM completed with status = (0x%08X)��mvm_module.c:MVM: SET_TIMING_V1: vsid:(0x%08X) vfr_mode:(%d)����mvm_module.c:MVM: SET_TIMING_V2: vsid:(0x%08X) vfr_mode:(%d)����mvm_module.c:MVM: SET_VFR_CONFIG: wrong vfr_cycle_duration_ms[%d] reseting to 20msec����mvm_module.c:MVM: SET_VFR_CONFIG: vsid:(0x%08X) vfr_mode:(%d) vfr_cycle_duration_us:(%d)����mvm_module.c:MVM: SET_VOICE_TIMING_REFERENCE: tx_reference MSW: 0x%08X, LSW: 0x%08X, rx_reference MSW: 0x%08X, LSW: 0x%08X��mvm_module.c:MVM: STATIC_RECONFIG Invalid src_addr=0x%08X, req_handle=0x%08X����mvm_module.c:MVM: UI_HDVOICE: invalid CMD:0x%08X.���mvm_module.c:MVM: UI_HDVOICE: HD Voice UI enablement:0x%08X, BBWE-specific command 0x%08X.��mvm_module.c:MVM: LISTEN_EVENT_CLASS:(0x%08X) listening ALREADY�mvm_module.c:MVM: LISTEN_EVENT_CLASS:(0x%08X) UNSUPPORTED���mvm_module.c:MVM: CANCEL_EVENT_CLASS:(0x%08X) cancelled ALREADY�mvm_module.c:MVM: CANCEL_EVENT_CLASS:(0x%08X) UNSUPPORTED���SlimBusTarget.c:[DevId: 0x%x] Issuing request for low-minus voltage�SlimBusTarget.c:[DevId: 0x%x] Cancelling request for low-minus voltage��SlimBus.c:[DevId: 0x%x] Framer failed to leave idle mode after timeout��SlimBus.c:[DevId: 0x%x] Cleared datashift workaround bit (port %d)��SlimBus.c:[DevId: 0x%x] Not enough qualifying master ports available during alloc request (err: 0x%x) (numPorts: %d) (minEP: %d) (minFIFO: %d)��SlimBusMaster.c:[DevId: 0x%x] Got satellite connect source port request (satLA: 0x%x) (channel: %d) (destLA: 0x%x) (port: %d) (EP: %d)��SlimBusMaster.c:[DevId: 0x%x] Got satellite connect sink port request (satLA: 0x%x) (channel: %d) (destLA: 0x%x) (port: %d) (EP: %d)����SlimBusMaster.c:[DevId: 0x%x] Error popping head of FreeSchedEventStack�SlimBusMaster.c:[DevId: 0x%x] Got spurious idle mode exited interrupt (bIdle: %d) (bEnum: %d)���SlimBusMaster.c:[DevId: 0x%x] AddPortConnectionTracker: A source is already connected (oldLA: 0x%x) (oldPort: %ld) (oldEP: %ld) (newLA: 0x%x) (newPort: %ld) (newEP: %ld)���SlimBusMaster.c:[DevId: 0x%x] Set datashift workaround bit (port %d)����SlimBusMaster.c:[DevId: 0x%x] Hardware reset failed while leaving low power mode����SlimBusMaster.c:[DevId: 0x%x] Hardware reset successful while leaving low power mode����SlimBusBamLib.c:[DevId: 0x%x] Processed dummy IO vector (port %d)���SlimBusBamLib.c:[DevId: 0x%x] Error returned from BAM pipe transfer to remove the invalid data shift (port: %d)�SlimBusBamLib.c:[DevId: 0x%x] Sumbitted dummy IO vector for hardware data shift (port: %d)��dog_hb.c:ADSP:Invalid inputs����dog_hb.c:ADSP:Invalid task_name length: %d��dog_hb.c:ADSP:Malloc failed�dog_hb.c:ADSP:System shutdown signal received���dog_hb.c:ADSP:Pong check failed�err_inject_crash.c:ADSP:Crash pending, ignoring subsequent request��err_inject_crash.c:ADSP:Invalid crash ID %#x����err_inject_crash.c:ADSP:Unhandled crash ID %#x��err_inject_crash.c:ADSP:Small eic_crash_delay dalconfig, using %d���err_inject_crash_user.c:ADSP:Entering STM and injecting DOG Bite, Not Supported in User PD��err_inject_crash_user.c:ADSP:Injecting DOG NMI, Not Supported in User PD����err_inject_crash_user.c:ADSP:Injecting DOG multithreaded Bite, Not Supported in User PD�err_user.c:ADSP:Err service init����procinfo_qdi_client_user.c:ADSP:Incorrect name type/NULL or empty dest buffer���procinfo_qdi_client_user.c:ADSP:Wrong name type�procinfo_qdi_client_user.c:ADSP:strlcpy failed��rcinit_init_user.c:ADSP:Init begins grp %x��rcinit_init_user.c:ADSP:Func # %x exit grp %x���rcxh.c:ADSP:Try task # %x���rcxh.c:ADSP:End try task # %x���servreg_localdb.c:ADSP:Calloc failed����servreg_localdb.c:ADSP:Name NULL����servreg_localdb.c:ADSP:Domain NULL��servreg_locator.c:ADSP:Calloc failed����servreg_locator.c:ADSP:Alloc failed�servreg_locator.c:ADSP:Spawning servreg_loc_init_task���servreg_locator.c:ADSP:Attempting APSS Service Locator Server connection����servreg_locator.c:ADSP:Connected to APSS Service Locator Server�servreg_locator.c:ADSP:QMI Locator client init failed: %d���servreg_locator.c:ADSP:servreg_loc_service_object NULL��servreg_locator.c:ADSP:Request: client_handle: %d, msg_id: %d, response_time: 0x%x��servreg_locator.c:ADSP:QMI get error: %d����servreg_locator.c:ADSP:Indication buff allocation failed����servreg_locator.c:ADSP:QMI decode error: %d�servreg_monitor.c:ADSP:sr_mon_handle NULL���servreg_monitor.c:ADSP:servreg_name NULL����servreg_monitor.c:ADSP:Invalid domain and/or service name���servreg_monitor.c:ADSP:sr_mon_handle has invalid signature��servreg_monitor.c:ADSP:Invalid transition in set_state(): 0x%x -> 0x%x��servreg_monitor.c:ADSP:sr_mon_node->rcesn_handle not created����servreg_monitor.c:ADSP:sr_mon_node NULL�servreg_monitor.c:ADSP:Client registered for remote service�servreg_monitor.c:ADSP:Remote listener_ref_count NON ZERO %d����servreg_monitor.c:ADSP:Client registration failed for remote service ret: %d����servreg_monitor.c:ADSP:User listener_ref_count NON ZERO %d��servreg_monitor.c:ADSP:Client registered for local service��servreg_monitor.c:ADSP:One ack set, pending acks: %d����servreg_monitor.c:ADSP:Sending ACK before state change notification sent out����servreg_monitor.c:ADSP:Cannot set ACK: ASYNC service����servreg_monitor.c:ADSP:Cannot set ACK: given transaction_id invalid�servreg_monitor.c:ADSP:Alloc failed�servreg_monitor.c:ADSP:Calloc failed����servreg_qdi_notifier_user.c:ADSP:sr_qdi_notif_node alloc failed�servreg_qdi_notifier_user.c:ADSP:Could not register root client in user PD��servreg_qdi_notifier_user.c:ADSP:Could not register as a remote listener in the notifier pool���servreg_qdi_notifier_user.c:ADSP:QDI register for remote listener failed����servreg_qdi_notifier_user.c:ADSP:Alloc failed���servreg_qdi_notifier_user.c:ADSP:Calloc failed��servreg_qdi_notifier_user.c:ADSP:Could not register root client in user pd��servreg_qdi_notifier_user.c:ADSP:State change notif received����Diag_LSM_test.c:Sending delayed responses���Diag_LSM_test.c:Out of memory- Cannot send the response�Diag_LSM_test.c:Out of memory- Cannot send the delayed response�Diag_LSM_test.c:Failed to allocate q_item for stress test. cmd %d %d %d %d 21�Diag_LSM_test.c:Test MSG with no arg ���Diag_LSM_test.c:MSG_1 Iter %d 22��Diag_LSM_test.c:MSG_2 Iter %d uid %d 23��Diag_LSM_test.c:MSG_3 Iter %d uid %d num_iter %d 24���Diag_LSM_test.c:MSG_4 Iter %d uid %d num_iter %d procid %d 25�Diag_LSM_test.c:MSG_5 Iter %d uid %d num_iter %d procid %d %d 26��Diag_LSM_test.c:MSG_6 Iter %d uid %d num_iter %d procid %d %d %d 27�Diag_LSM_test.c:Client MSG_HIGH Iter %d uid %d num_iter %d 28����Diag_LSM_test.c:MSG_ERROR Iter %d uid %d num_iter %d 29��Diag_LSM_test.c:MSG_FATAL Iter %d uid %d num_iter %d 30��Diag_LSM_test.c:ERR Iter %d uid %d num_iter %d 31����Diag_LSM_test.c:Panic mode test %d uid %d���Diag_LSM_test.c:Malloc failed in log_submit() test case.Iter %d 32���Diag_LSM_test.c:Unable to format the micro diagbuffer logs: error no = %d bytes_written=%d��Diag_LSM_Log.c:Attempt to allocate %d but Max Length of a log packet supported is %d����diagbuf_mpd.c:ULogCore_NameGet returned fail����diagbuf_mpd.c:micro_diagbuffer_NameGet returned fail����usb_xhcd.c:BuffRingPhy HI 0x%08x LO 0x%08x��usb_afe.c:UAC_IOCTL_START_SESSION uac_sess_hnd 0x%08x���usb_afe.c:UAC_IOCTL_STOP_SESSION uac_sess_hnd 0x%08x����usb_afe.c:data ep feedbk %d�usb_afe.c:QMI status failure %d�usb_afe.c:AFE sampling_rate %d bit_width %d num_channels %d�usb_afe.c:num_of_samples %d bInterval %d bRefresh %d����usb_afe.c:OUT pipe disable uac_sess_hnd 0x%08x��usb_afe.c:IN pipe disable uac_sess_hnd 0x%08x���usb_afe.c:handle disconnect event on slot_id %d�usb_afe.c:usb_afe %x usb_afe_internal %x����usb_qmi.c:failed, error %d��usb_qmi.c:register error cb failed, error %d����usb_qmi.c:usb_qmi_error_cb(), error %d��usb_qmi.c:deinit failed, error %d���usb_qmi.c:usb_qmi_client_ctx is un-initialized��usb_diag_log.c:Log pkt ptr or log info ptr is NULL��usb_diag_log.c:Invalid data format : %u for QXDM log code 0x%X��usb_diag_log.c:Log info ptr is NULL�apr_timer.c:func_call failed, error code ���apr_timer.c:qurt_thread_join failed, error code ����AFEClientHandler.cpp:Invalid codec interrupt GPIO type: 0x%lx���AFEClientHandler.cpp:Failed to configure the GPIO for codec hardware interrupt, result: %d��AFEClientHandler.cpp:Codec Interrupt GPIO num is invalid����AFEClientHandler.cpp:Failed to configure GPIO pin: #lu��AFEClientHandler.cpp:Codec Interrupt LPI GPIO num is invalid����AFEClientHandler.cpp:Failed to configure the GPIO[%lu] for codec interrupt: %d��AFEClientHandler.cpp:Invalid codec interrupt type: 0x%lx����AFEClientHandler.cpp:Failed to configure PDC GPIO intr, result: %d��AFEClientHandler.cpp:Failed to deregister the CDC GPIO interrupt, result = %d���AFEClientHandler.cpp:Failed to deregister the CDC Defalult GPIO, result = %d����AFEClientHandler.cpp:Failed to deregister the CDC PDC GPIO, result = %d�AFEClientHandler.cpp:Failed to deregister the CDC LPI GPIO, result = %d�AFECodecHandler.cpp:afe_cdc_pwr_state: reg_addr: 0x%lx, value: %d���AFEDeviceConfig.cpp:Failed to configure power state control for codec 0x%x��AFEDeviceConfig.cpp:Failed to configure codec power state control: 0x%x�AFEDevCommon.cpp:LPASS devCfg: Error getting prop handle����AFEDevCommon.cpp:LPASS DevCfg: Error getting property struct ptr����AFEDevCommon.cpp:GPIO INIT: Property string NULL����AFEDevCommon.cpp:GPIO INIT: Failed to attach to TLMM����AFEDevCommon.cpp:GPIO INIT: Failed to acquire a handle to GPIOInt���AFEDevCommon.cpp:GPIO INIT: Failed to query GPIO properties�AFEDevCommon.cpp:GPIO INIT: Failed to configure GPIO Pin����AFEDevCommon.cpp:GPIO INIT: Failed to set trigger for GPIOInt���AFEDevCommon.cpp:GPIO INIT:Failed to clear interrupt����AFEDevCommon.cpp:GPIO INIT:Failed to enable GPIO interrupt��AFEDevCommon.cpp:GPIO INIT: Configured GPIO[%lu] successfully���AFEDevCommon.cpp:GPIO DEINIT:Failed to disable interrupt����AFEDevCommon.cpp:GPIO DEINIT:Failed to detach from GPIOInt��AFEDevCommon.cpp:GPIO DEINIT:Failed to detach from TLMM�AFEDevCommon.cpp:GPIO DEINIT:GPIO[%lu] interrupt de-init successful�AFEDevCommon.cpp:Interrut property pointer is NULL��AFEDevCommon.cpp:Intr Reg: Failed to acquire a handle to INT Controller, result: 0x%lx��AFEDevCommon.cpp:LPI GPIO INIT: Failed to query interrupt number����AFEDevCommon.cpp:Failed to register ISR with l2vic[%lu], result: 0x%lx��AFEDevCommon.cpp:Interrupt registration successful, L2VIC[%lu]��AFEDevCommon.cpp:Failed to deregister interrupt, l2vic[%lu], result: 0x%lx��AFEDevCommon.cpp:Failed to detach from INT controller, result: 0x%lx����AFEDevCommon.cpp:Intr de-register completed successfully, l2vic_id: %lu�AFEDevCommon.cpp:PDC GPIO INIT: gpio prop ptr is NULL���AFEDevCommon.cpp:PDC GPIO INIT: Failed to attach to TLMM����AFEDevCommon.cpp:PDC GPIO INIT: Failed to configure GPIO Pin[%lu], result: 0x%lx����AFEDevCommon.cpp:PDC GPIO INIT: Successfully configured GPIO Pin[%lu]���AFEDevCommon.cpp:PDC GPIO DEINIT: gpio prop ptr is NULL�AFEDevCommon.cpp:PDC GPIO DEINIT: Failed to detach from TLMM����AFEDevCommon.cpp:PDC GPIO DEINIT: GPIO deinit completed successfully����AFEDevCommon.cpp:GPIO INT prop ptr is NULL��AFEDevCommon.cpp:PDC GPIO INIT: Failed to acquire a handle to GPIOInt���AFEDevCommon.cpp:Configured PDC GPIO[%lu] Interrupt successfully����AFEDevCommon.cpp:GPIO prop ptr is NULL or DAL GPIOInit handle is NULL/not attached��AFEDevCommon.cpp:Failed to disable interrupt for GPIO[%lu], result: 0x%lx���AFEDevCommon.cpp:PDC GPIO DEINIT:Failed to detach from GPIOInt, result: 0x%lx���AFEDevCommon.cpp:PDC GPIO[%lu] Interrupt de-registration successful�AFEDeviceDriver.cpp:AFE LPASS h/w info init failed��AFEDeviceDriver.cpp:encoding in afe is not supported for group device on port 0x%x��AFEDeviceDriver.cpp:decoding in afe is not supported for group device on port 0x%x��AFEDeviceDriver.cpp:Failed to allocate memory for afe_create_enc_dec_dev_buffers buffers, port id : 0x%x ���AFEDeviceDriver.cpp:Invalid number of channels :%u port:0x%x���AFEDeviceDriver.cpp:Apr payload of insufficient size received for AFE_SVC_CMD_REQUEST_LPASS_RESOURCES���AFEDeviceDriver.cpp:apr payloadptr is NULL��AFEDeviceDriver.cpp:Invalid Resource id 0x%x����AFEDeviceDriver.cpp:Resouce allocation failed for resource id:0x%x��AFEDeviceDriver.cpp:Apr payload of insufficient size received for AFE_SVC_CMD_RELEASE_LPASS_RESOURCES���AFEDeviceDriver.cpp:Resouce release failed for resource id:0x%x�AFEDmaManager.cpp:Warning: Not enough 32 bit words available to write into DMA buffer, Available words = %lu����AFEDmaManager.cpp:memory alloc failed���AFEDmaManager.cpp:DMA channels allocation failed, dir:0x%x��AFEDmaManager.cpp: Invalid channel index 0x%x���AFEDmaManager.cpp:Error in frreing dma idx: 0x%x dir:0x%x���AFEDmaManager.cpp:Null pointer of DMA state structure���AFEDmaManager.cpp: Invalid channel index received 0x%x��AFEDmaManager.cpp:Apr payload of insufficient size received for LPASS DMA resources�AFEDmaManager.cpp:apr payloadptr is NULL����AFEDmaManager.cpp:AFE_SVC_CMD_REQUEST_LPASS_RESOURCES Response packet allocation failed = %ld!�AFEDmaManager.cpp:afe_remote_lpass_core_hw_vote_reqeust Response packet allocation failed. pPacket is NULL��AFEDmaManager.cpp:allocation of Read dma failed 0x%x����AFEDmaManager.cpp:allocation of write dma failed 0x%x���AFEDmaManager.cpp: Error in freeing dma resources 0x%x��AFEDmaManager.cpp: Error in freeing rma resources 0x%x��AFEDmaManager.cpp:afe_remote_lpass_dma_resources_reqeust Response send failed = %ld!���AFEDmaManager.cpp: Invalid DMA type�AFEDmaManager.cpp:Apr payload of insufficient size received for AFE_SVC_CMD_RELEASE_LPASS_DMA_RESOURCES�AFEDmaManager.cpp:Rcvd dma indexes which are not allocated to HLOS, erroring out����AFEDmaManager.cpp:Error in freeing resources����AFEDmaManagerUtils.cpp:No free dma for sink dma type[%d]����AFEDmaManagerUtils.cpp:No free dma for source dma type[%d]��AFEDmaManagerUtils.cpp:Get buffer size called with 0 buffers����AFEDmaManagerUtils.cpp:Calculated DMA buffer size = 0���AFEHalDmaType0V5_stub.cpp:func_table is NULL ====���AFEHalDmaType0V5_stub.cpp:hal_dma_init_type0_v4 stub set to NULL����AFEHalDmaType0V6.cpp:hal_dma_init_type0_v6 is called����AFEHalDmaType0V6.cpp:func_table is NULL ====����AFEHalDmaType0V6.cpp:Dma Type0 [intr_index0:%d] [reg_base_type0:0x%x] [dma_reg_virtoffset_type0:0x%x]���AFEHalDmaType0V6.cpp:[rddma_reg_virtoffset_type0:0x%x] [wrdma_reg_virtoffset_type0:0x%x] [stc_rddma_reg_virtoffset_type0:0x%x] [stc_wrdma_reg_virtoffset_type0:0x%x]����AFEHalDmaType0V7_stub.cpp:func_table is NULL ====���AFEHalDmaType0V7_stub.cpp:hal_dma_init_type0_v7 stub set to NULL����AFEHdmiOutputDrv.cpp:Null afe port pointer or some corruption happened��AFEHdmiOutputDrv.cpp:Received SDE Audio disable interrupt���AFEHdmiOutputDrv.cpp:ELITEMSG_CUSTOM_HDMI_OVER_DP,Received UNMUTE DONE dev_port: 0x%x, p_ctx: 0x%x��AFEHdmiOutputDrv.cpp:ELITEMSG_CUSTOM_HDMI_OVER_DP, Received MUTE DONE dev_port_ptr: 0x%x, p_ctx: 0x%x��AFEHdmiOutputDrv.cpp:ELITEMSG_CUSTOM_HDMI_OVER_DP: Failed in elite_apr_if_end_cmd() with return code: %ld���AFEHdmiOutputDrv.cpp:Illegal sampling rate value: %lu���HalLpassHdmiOutputFuncWrapper.cpp: Unknown LPASS h/w version: 0x%x��AFEI2sDriver.cpp:Device port initalization: ports memory allocation failure�AFEI2sDriver.cpp:Failed to get req DMA num buffers��AFEI2sDriver.cpp:DMA total buffer length (%lu) is not 16 byte aligned���AFEHalI2sV1_stub.c:hal_i2s_get_func_table_v1 func_table is NULL�AFEHalI2sV1_stub.c:hal_i2s_get_func_table_v1 stub hal func_table set to NULL����AFEHalI2sV2.c:i2s version:[0x%x], i2s phy base:[0x%x], i2s virt base:[0x%x], i2s offset:[0x%x], i2s virt offset:[0x%x], int i2s virt offset:[0x%x]��AFEHalI2sV3_stub.c:hal_i2s_get_func_table_v3 func_table is NULL�AFEHalI2sV3_stub.c:hal_i2s_get_func_table_v3 stub hal func_table set to NULL����AFEPcmDriver.cpp:Invalid PCM index: 0x%x����AFEPcmDriver.cpp:Failed to get req DMA num buffers��AFEPcmDriver.cpp:DMA total buffer length (%lu) is not 16 byte aligned���AFEHalPcmV1_stub.c:hal_pcm_get_func_table_v1 func_table is NULL�AFEHalPcmV1_stub.c:hal_pcm_get_func_table_v1 stub hal func_table set to NULL����AFEHalPcmV3_stub.c:hal_pcm_get_func_table_v3 func_table is NULL�AFEHalPcmV3_stub.c:hal_pcm_get_func_table_v3 stub hal func_table set to NULL����AFESlimbusDriver.cpp:SLIMbus: Device Config failed��AFESlimbusDriver.cpp:De-initializing SLIMBUS HW driver, slimbus dev id: %d��AFESlimbusDriver.cpp:Failed to open stream ports for port id 0x%x, 0x%x�AFESlimbusDriver.cpp:Failed to open data channels for port id 0x%x, 0x%x����AFESlimbusDriver.cpp:Failed to get SLIMbus HW capability, result: 0x%x��AFESlimbusDriver.cpp:SLIMbus multi end point supported��AFESlimbusDriver.cpp:SLIMbus multi end point not supported��AFESlimbusDriverUtils.cpp:Successfully allocated master port %d and assigned %d channels to it��AFESlimbusDriverUtils.cpp:Failed to allocate master port, tried all combinations of max end points��AFESlimbusDriverUtils.cpp:Master port with request_num_ch:%d is not available, trying with next max end point:%d����AFESlimbusDriverUtils.cpp:Failed to allocate resource group for mutli end point master port idx: %d, 0x%x���AFESlimbusDriverUtils.cpp:Failed to add channel %d to multi end point resource group, port idx %d, 0x%x�AFESlimbusDriverUtils.cpp:Failed to connect multi end point master port to the channel group, master idx:%d, 0x%x���AFESlimbusDriverUtils.cpp:Failed to remove the channel, 0x%x����AFESlimbusDriverUtils.cpp:Failed to do ReConfigNow(), 0x%x��AFESlimbusDriverUtils.cpp:Failed to de-allocate resource group for master port idx: %d, 0x%x����AFESbMultiEp.cpp:Failed to allocate master port with multi end points for %d channels, 0x%x�AFEHalTdmFuncWrapper.c: hal_tdm_init() is called version 0x%x���AFEHalTdmFuncWrapper.c: Unknown TDM HAL version: 0x%x���AFETdmDriver.cpp:Number of channels and active slots are mismatch, num_chs:%lu, slotmask 0x%x���AFETdmDriver.cpp:Un-supported TDM num channels:%lu for sample rate %lu, intf: %x����AFETdmDriver.cpp:Failed to get req DMA num buffers��AFETdmDriver.cpp:DMA total buffer length (%lu) is not 16 byte aligned���AFEHalTdmV1.c:hal_tdm_get_func_table_v1 func_table is NULL��AFEHalTdmV1.c:tdm version:[0x%x], tdm phy base:[0x%x], tdm virt base:[0x%x], tdm virt offset:[0x%x]�AFEHalTdmV1.c:TDM DIFF mode (%d) (%d)���AFEHalTdmV2_stub.c:hal_pcm_get_func_table_v2 func_table is NULL�AFEHalTdmV3_stub.c:hal_pcm_get_func_table_v3 func_table is NULL�AFEUSBAudioDriver.cpp:USB audio lpcm med fmt Fails, Bad Param���AFEUSBAudioDriver.cpp:AFE USB audio LPCM med format 0x%lx for port 0x%x ����AFEUSBAudioDriver.cpp:Failed to latch avtimer and qtimer together���AFEUSBAudioDriver.cpp: avtimer_timestamp 0x%lx%lx qtimer_timestamp 0x%lx%lx for port 0x%x���AFEUSBAudioDriver.cpp:Failed to get timestamp from UAC driver, uac result %ld���AFEUSBAudioDriver.cpp:Failed to restore USBA config, port_id: 0x%lx�AFEUSBAudioDriver.cpp:Failed to restore USBA dev params, port_id: 0x%lx�VFRIsrHandler.cpp:Failed to register vfr [%d] interrupt with status %d��VFRIsrHandler.cpp:Failed to unregister vfr [%d] interrupt with status %d����avtimer_drv_wrapper.c:hal_avtimer_latch_av_q_timer_tick failed with result %d���avtimer_drv_wrapper.c:avtimer_drv_latch_avtimer_qtimer: Invalid hw index %d�avtimer_drv_wrapper.c:avtimer_drv_latch_avtimer_qtimer: Invalid Index %d����AFEAvSync.cpp:group_delay_us = %lu, enc/dec delay %lu���AFEAvtDrift.cpp:afe_dev_timing_stats fail, port_id:0x%x, required size = %d, given size = %d����AFEAvtDrift.cpp:afe_dev_timing_stats:port_id:0x%x, direction:%d, reference_timer:%d, resync_flag:%d, acc_drift_value:%d, absoulte_time:[MSW: %lu, LSW: %lu] ����AFEAvtDrift.cpp:afe_dev_timing_stats fail, device is not active, port_id:0x%x, afe_port_state:%d����AFEMmpm.cpp:AFE port 0x%x voting enc/decoding kpps %lu, total kpps %lu�AFEMmpm.cpp:AFE port 0x%x enc/dec ebi_to_qdsp6ss_bw Bps %lu, total Bps %lu�AFEPortAprHandler.cpp:AFECmdDmaStart: port_id: 0x%x, error in afe_create_enc_dec, error: 0x%x���AFEPortAprHandler.cpp:For Tx port 0x%x, port fs %lu and dev fs %lu must be equal��AFEPortAprHandler.cpp:port fs %lu and dev fs %lu are not integer multiples on port 0x%x���AFEPortAprHandler.cpp:Error: module_id 0x%x Set-Param rcvd unsupported instance_id:%hu �AFEPortAprHandler.cpp:Port in stop stop already, as part of SDE disabe interrupt handling 0x%x��AFEPortHandlers.cpp:Port intf=%d,dir=%d. Resampler init failed for TX client id 0x%lX and hence this client is disabled�AFEPortHandlers.cpp:Port intf=%d, dir=%d. Resampler init failed for RX client id 0x%lX, disabling client����AFEPortHandlers.cpp:Error in afe_port_rate_match_info_reinit port_id=%x,client_id=0x%lX, hence this client is disabled��AFEPortManager.cpp:Compressed Media type msg port_id=%x,client_id=0x%lX,sample_rate=%lu,channels=%d,bytes_p_ch=%lu,int_samples_per_period=%lu, client_data_type=%d, port_data_type=%d���AFESvc_topo.cpp:AFE Svc topo evt: Null ptr event_ptr(0x%lx)�AFESvc_topo.cpp:AFE Svc topo evt: Null topo_ptr(0x%lx)��AFESvc_topo.cpp:AFE Svc topo evt: Module with id 0x%lx array out of bound���AFESvc_topo.cpp:AFE Svc topo evt: Module with id 0x%lX provided insufficient size for event id %lu. Required: %d bytes, provided: %lu bytes.����AFESvc_topo.cpp:AFE Svc topo evt: Module with id 0x%lX changed delay from %lu us to %lu us. PP total delay changed from %lu us to %lu us.���AFESvc_topo.cpp:AFE Svc topo evt: Event id %lu raised by module 0x%lx is not supported.�capi_v2_eansv2_utils.cpp:CAPIv2 EANSV2: static memory : %lu scratch : %lu ��capi_v2_eansv2_utils.cpp:CAPIv2 EANSV2: static variables have changed, calling algo init����capi_v2_multistageiir_utils.cpp:CAPI_V2 MSIIR : Updated KPPS value is %lu���capi_v2_fir_filter.cpp:CAPIv2 FIR: Enable Set Param Set Sucessfully : %u����capi_v2_fir_filter_utils.cpp:CAPIv2 FIR: Failed creating new instance of library: Out of Memory for chan : %lu!�capi_v2_fir_filter_utils.cpp:CAPIv2 FIR: Failed initializing the library memory for chan %lu!���capi_v2_fir_filter_utils.cpp:CAPI_V2 FIR: Set property id 0x%lx, number of input and output ports cannot be more than %d����capi_v2_fir_filter_utils.cpp:CAPIV2 FIR : Received invalid tap length of %u for chan - %lu , Max value set - %lu����capi_v2_fir_filter_utils.cpp:CAPIv2 FIR: Filter coeff Set param failed for channel %lu with lib error %u����capi_v2_fir_filter_utils.cpp:CAPI_V2 FIR: Reset failed for chan %lu�capi_v2_fir_filter_utils.cpp:CAPIv2 FIR: Enable SetParam failed for chan - %lu with error code %u���capi_v2_fir_filter_utils.cpp:CAPIv2 FIR : Received incorrect bit width of %lu for coefficients �capi_v2_drc.cpp:VCP:ACP: drc_set_param: caching the parameters��capi_v2_drc.cpp:VCP:ACP: drc_set_param(): lib set param failed for param_id(0x%ld). result(%ld)�capi_v2_drc.cpp:VCP:DONE WITH INPUT MEDIA FORMAT����capi_v2_drc.cpp:VCP:ACP: capi_v2_drc_apply_cal_lib(): lib set param failed for param_id(0x%lx). result(%ld)�capi_v2_limiter24.cpp:CAPI_V2 limiter: Init received NULL pointer���capi_v2_limiter24.cpp:CAPI_V2 limiter: Init Failed!�capi_v2_limiter24.cpp:CAPI_V2 limiter: Init Done!���capi_v2_limiter24.cpp:limiter_process: received bad pointer�capi_v2_limiter24.cpp:limiter_process failed!���capi_v2_limiter24.cpp:CAPI_V2 limiter: Set param, received NULL pointer�capi_v2_limiter24.cpp:CAPI_V2 limiter: Set param received NULL param pointer����capi_v2_limiter24.cpp:CAPI_V2 LIMITER: Set param, Bad param size %lu����capi_v2_limiter24.cpp:SetParam Tx Stream Limiter enable %x��capi_v2_limiter24.cpp:Tx Stream Limiter delay too high, defaulting to %d����capi_v2_limiter24.cpp:CAPI_V2 limiter: Set param received NULL param pointer - limiter_lib not allocated����capi_v2_limiter24.cpp:CAPI_V2 LIMITER: set param failed for param id %lu : %d���capi_v2_limiter24.cpp:SetParam Tx Stream Limiter params, sLimMode=%x, sLimMakeUpGain=%x, sLimGc=%x, sLimDelay=%x, sLimMaxWait=%x, nLimThreshold=%x��capi_v2_limiter24.cpp:CAPI_V2 LIMITER: Config Set param, Bad param size %lu�capi_v2_limiter24.cpp:Limiter delay too high, setting to max allowed %d�capi_v2_limiter24.cpp:Limiter history window length too high, setting to max allowed %d�capi_v2_limiter24.cpp:Limiter SetParam config params are successful�capi_v2_limiter24.cpp:SetParam Tx Stream Limiter bypass mode %x�capi_v2_limiter24.cpp:CAPI_V2 limiter: Set params, Unsupported param id %lu�capi_v2_limiter24.cpp:CAPI_V2 limiter: Get param, received NULL pointer�capi_v2_limiter24.cpp:CAPI_V2 limiter: Get param, received NULL param pointer���capi_v2_limiter24.cpp:GetParam Tx Stream Limiter enable %x��capi_v2_limiter24.cpp:CAPI_V2 limiter: Get param, Bad param size %lu����capi_v2_limiter24.cpp:CAPI_V2 LIMITER: failed to get lim lib param: %d��capi_v2_limiter24.cpp:CAPI_V2 limiter: Get config params, Bad param size %lu����capi_v2_limiter24.cpp:CAPI_V2 limiter: Get params, Unsupported param id %lu�capi_v2_limiter24.cpp:CAPI_V2 limiter: Set properties, received NULL pointer����capi_v2_limiter24.cpp:CAPI_V2 limiter: Get properties, received NULL pointer����capi_v2_limiter24.cpp:CAPI_V2 limiter: End Received NULL pointer����capi_v2_limiter24.cpp:CAPI_V2 limiter: End done�capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Event callback is not set. Unable to raise events!�capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Reallocating lib memory, Lib memory allocation failed.�capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: failed to init lim lib: %d�capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Set property, received null property array.����capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Set property id 0x%lx, received null buffer.���capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Set property id 0x%lx, number of input and output ports cannot be more than %u�capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Set property id 0x%lx, Bad param size %lu��capi_v2_limiter24_utils.cpp:Venc Limter initialization error %d�capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Output Q factor %lu different from input Q factor %lu��capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: unsupported input media format passed, default values will be taken����capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: unsupported output media format passed, default values will be taken���capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Set property id 0x%lx, Not supported.��capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Get property, received null property array.����capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Get property id 0x%lx, received null buffer.���capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Get property id 0x%lx, Bad param size %lu��capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Get property id 0x%lx, module is not allocated�capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Get property id 0x%lx, invalid port info.��capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Get property id 0x%lx, invalid outptu port index.��capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Get property id 0x%lx, Not Supported.��capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Lib is not created yet!����capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Failed to send output media format updated event.��capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Failed to send BW event.���capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Failed to send KPPS event.�capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Failed to send algoritmic delay event.�capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Unsupported data format����capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Only supports 16 and 32 bit data. Received %lu.����capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: L%lu Q%lu is not supported.����capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Only deinterleaved unpacked data supported.����capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: Unsigned data not supported.���capi_v2_limiter24_utils.cpp:CAPI_V2 LIMITER: number of channels should not be zero��capi_v2_media_format_converter.cpp:MFC: Native mode enabled for out sampling rate���capi_v2_media_format_converter.cpp:MFC: Sampling rate must be >= 0 and <= 384kHz. Received %lu��capi_v2_media_format_converter.cpp:MFC: Native mode enabled for out channel info����capi_v2_media_format_converter.cpp:MFC: Number of channels must be between >= 0 and <= %d. Received %lu�capi_v2_media_format_converter.cpp:MFC: Native mode enabled for out bits_per_sample�capi_v2_media_format_converter.cpp:MFC: Bit width must either be 0 or 16 or 32 bits per sample. Received %lu����capi_v2_media_format_converter.cpp:MFC: Storing out media params temporarily, since one of them is in Native mode���capi_v2_media_format_converter.cpp:MFC: Output media format set through mfc-setparam SR : %lu, CH : %lu, BPS : %lu, QF : %lu����capi_v2_media_format_converter.cpp:MFC: Output media format set through intf-ext setparam SR : %lu, CH : %lu, BPS : %lu, QF : %lu���capi_v2_media_format_converter.cpp:MFC: unsupported bits per sample received %lu����capi_v2_media_format_converter.cpp:MFC: Reconfiguring since output params has changed���capi_v2_media_format_converter.cpp:MFC: Sampling rate must be between 0 and 384kHz. Received %lu����capi_v2_media_format_converter.cpp:MFC: Set output media format from input��capi_v2_media_format_converter.cpp:MFC: Current and new output params from input are same, reconfiguring since input params has changed�capi_v2_media_format_converter.cpp:MFC: Reconfiguring since input params has changed����capi_v2_media_format_converter.cpp:MFC: Printing media format: fs = %lu, ch = %lu, bps = %lu, qf = %lu��capi_v2_sample_slip.cpp:CAPI_V2 SAMPLE_SLIP: Get Frame Size Info, Bad param size %lu����capi_v2_sample_slip.cpp:CAPI_V2 SAMPLE_SLIP: Get internal buffer size, Bad param size %lu���capi_v2_sample_slip.cpp:CAPI_V2 SAMPLE_SLIP: Get Delayline offset value, Bad param size %lu�capi_v2_soft_vol_utils.cpp:SOFT_VOL: unsupported channel map %hu for channel no. %hu.���CoPDepacketizer.cpp:CoP DePacketization : CoP packetizer malloc failed��CoPDepacketizer.cpp:CoP Depacketizer : amount zero padding must be even %u��CoPDepacketizer.cpp:CoP Depacketizer: version must be zero��CoPDepacketizer.cpp:CoP Depacketizer: error bit is set��capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 failed to create depacketizer���capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 ignoring unsupported prop error during init�capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Get, Param id 0x%lx Bad param size %lu��capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Get, failed to get Param id 0x%lx due to invalid/unexpected values��capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Get, port id not valid��capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Get, Param id 0x%lx max input port is 1. asking for %lu�capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Get, Param id 0x%lx max output port is 1. asking for %lu����capi_v2_cop_depacketizer.cpp:cop_pack_capiv2 Get, Param id 0x%lx Bad param size %lu�capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Get property for 0x%x. Not supported.���capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Get property for 0x%x done��capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Set, Param id 0x%lx Bad param size %lu��capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Set, Param id 0x%lx num of in and out ports cannot be port than 1���capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Ignoring input media fmt for depack�capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Ignoring output media fmt for depack����capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Set property for 0x%x. Not supported.���capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Set property for 0x%x done��capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Failed to raise event for KPPS change���capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 raised event for KPPS change %lu����capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Failed to raise event for bandwidth change��capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 raised event for bw change %lu %lu��capi_v2_cop_depacketizer.cpp:Invalid # of available input bytes after process call at input port 0 : Available bytes before = %ld, Available bytes after = %ld��capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 output buffer size not sufficient. needed = %u. available = %u��capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 bit stream error����capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Failed to raise event for port-threshold change�capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 raised event for port-threshold change %u���capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Failed to raise event for COP frame length change���capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 raised event for COP frame length change %lu (nominal ? %u)�capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 End done����capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Set param for 0x%lx failed��capi_v2_cop_depacketizer.cpp:cop_depack_capi_v2 Get param for 0x%lx failed��capi_v2_cop_packetizer.cpp:cop_pack_capiv2: scrambler flag = %d�audproc_bufhandler.cpp:audproc_svc: Releasing EOS data Q message during flush���audproc_event_api_utils.cpp:Inserted node at 0x%lX for (event,module,instance) = (0x%lX, 0x%lX, 0x%X) ���audproc_event_api_utils.cpp:Removed node at 0x%lX for (event,module,instance) = (0x%lX, 0x%lX, 0x%X) ����audproc_msghandler.cpp:P%hX EC is not present in topo. Discarding media fmt for nonPri port(%x)�audproc_msghandler.cpp:P%hX audproc_svc in_port %x: Received resync command�audproc_msghandler.cpp:P%hX audproc_svc in_port %x: Failed to send resync buffer����audproc_msghandler.cpp:P%hX audproc_svc port_id %x: Received EOS on non-primary port!. Calling func to wait for prim port data��audproc_msghandler.cpp:P%hX audproc_svc: Sending MediaTypeMsg downstream of type %lu����audproc_msghandler.cpp:P%hX audproc_svc port_id %x: Received EOS while BG th is active, sending it to bg thread�audproc_msghandler.cpp:P%hX audproc_svc: Can't create Resync Msg!���audproc_msghandler.cpp:P%hX audproc_svc: Can't enqueue Resync Msg to downstream dataQ!��audproc_svc.cpp:P%hX audproc_svc: Fail to initialize signals with result: %d!���audproc_svc.cpp:p%hx audproc_svc: numActiveInPorts is 2 but EC is not present in topology. Returning NULL for far handle!���audproc_svc.cpp:P%hX audproc_svc: releasing cached data Q msgs. pending msgs = %lu port id %lu��audproc_svc.cpp:P%hX AudPP_DataProc_ReleasePendingPackets in_port %x: Failed to release MediaTypeMsg!���audproc_svc.cpp:P%hX audproc_svc: Failed to initialize enable cmd Q signal!�audproc_svc.cpp:P%hX audproc_svc: Fail to add enable cmd Q signal to channel: %d!���audproc_svc.cpp:P%hX audproc_svc: PP is in FATAL error state, cannot process commands ��audproc_svc.cpp: P%hX Received NULL pointer for the payload while processing Register Events command����audproc_svc.cpp: P%hX Received incorrect payload size of %lu����audproc_svc.cpp: P%hX Incorrect payloadSize after number of events %lu��audproc_svc.cpp:P%hX audproc_svc : AudPP_ProcessRegisterPPEvents sent ack ��audproc_svc.cpp:P%hX audproc_svc: Invalid payload received for event 0x%lX �audproc_svc.cpp:P%hX: Module ID 0x%lX is not present in the topology����audproc_svc.cpp:P%hX Event ID - 0x%lX is not registered with module - 0x%lX due to %lu error����audproc_svc.cpp:P%hX: Could not create a node to store client details for (event ID, moduleID,instanceID) = (0x%lX, 0x%lX, 0x%X)����audproc_svc.cpp:P%hX: Could not create a node to store client details for (event ID, moduleID, instanceID) = (0x%lX, 0x%lX, 0x%X)���audproc_svc.cpp:P%hX:Module ID - 0x%lX with instance ID - 0x%lX is not present in the topology. So event - 0x%lX cannot be registered with it���audproc_svc.cpp:P%hX AudPP_HandleBackGroundThread_CB: unsupported event id %lx��audproc_topo_bg_thread.cpp:P%hX topo_bg_thread_reset_input_buffers: No Memory allocated for internal buffer�audproc_topo_bg_thread.cpp:P%hX topo_bg_thread_start_process: new offset is %lu����audproc_topo_bg_thread.cpp:topo_bg_set_dataQ_pending_flag: NULL Instance pointer error��audproc_topo_bg_thread.cpp:topo_bg_set_cmdQ_pending_flag: NULL Instance pointer error���audproc_topo_bg_thread.cpp:topo_bg_any_main_th_event_pending: NULL Instance pointer error���audproc_topo_bg_thread.cpp:topo_bg_send_eos_flag: NULL Instance pointer error���audproc_topo_bg_thread.cpp:P%X topo_bg_raise_process_done_event failed with result %lu��audproc_topo_bg_thread.cpp:topo_bg_realloc_internal_buff: No Memory allocated for internal buffer���audproc_topohandler.cpp:P%hX audproc_svc: Invalid case of disabled connected module during process loop id 0x%lX-0x%lX. bailing out.����audproc_topohandler.cpp:P%hX ERROR !! Module-Instance with id 0x%lX-0x%lX returned invalid input threshold %lu. ����audproc_topohandler.cpp:P%hX ERROR !! Module-Instance with id 0x%lX-0x%lX returned invalid output threshold %lu. ���audproc_topohandler.cpp:P%hX audproc_svc : Payload ptr received is NULL from module ID %lu ����audproc_topohandler.cpp:P%hX audproc_svc: Module-Instance with id 0x%lX-0x%lX is unable to allocate %lu bytes of memory to send event registration payload��audproc_topohandler.cpp:ECNS custom static property: is_monitoring_supported(%d)����audproc_topohandler.cpp:P%hX audproc_svc: Module-Instance with id 0x%lX-0x%lX insufficient number of bytes %lu for input port %lu.��audproc_topohandler.cpp:P%hX audproc_svc: Module-Instance with id 0x%lX-0x%lX incorrect number of samples %lu left in output port %lu.��audproc_topohandler.cpp:P%hX topo_send_algo_reset: send algo reset to Module-Instance with ID %lX-%lX���audproc_topohandler.cpp:P%hX audproc_svc: Module-Instance with ID %lX-%lXfailed to reset.���AudDevMgr.cpp:ADM: AudPP_CreateSvc EP_ID2 :0x%x and echo_cancel = %d����AudDevMgr.cpp:ADM: As part of Tx ADM_CMD_DEVICE_OPEN, issuing AFE_CONNECT_REQ cmd, EP1: 0x%X, SR %lu, num ch %lu, bit-width %lu, frameSize %lx, NumAfeBuf %lu ��AudDevMgr.cpp:ADM: As part of Tx ADM_CMD_DEVICE_OPEN, issuing AFE_CONNECT_REQ cmd (AFE EC Ref port (Rx port)), EP2: 0x%X, SR %lu, num ch %lu, bit-width %lu, frameSize %lx, NumAfeBuf %lu���AudDevMgr.cpp:ADM Error:Rcvd invalid Matrix ID:[%lu] in ADM_CMD_MATRIX_MAP_ROUTINGS_V5��AudDevMgr.cpp:Error: ADM rcvd invalid device ID [%hu] for direction:%hu�AudDevMgr.cpp:ADM processing ADM_CMD_REGISTER_PP_EVENTS ����AudDevMgr.cpp:ADM: ADM_CMD_REGISTER_PP_EVENTS received NULL apr pkt ����AudDevMgr.cpp:ADM: ADM_CMD_REGISTER_PP_EVENTS cmd on compressed COPP %lu failed. Not supported in NONE Topology����AudDevMgr.cpp:ADM: ADM_CMD_REGISTER_PP_EVENTS cmd is not supported on LLNP/ULL COPP %lu. cmd failed�AudDevMgr.cpp:ADM: message create failed for register_apr_event. unCoppID %lu���AudDevMgr.cpp:ADM: Failed to push cmd to PP�AudDevMgr.cpp:ADM: Wait for ack failed��AudDevMgr.cpp:ADM: Processing ADM_CMD_SET_MTMX_STRTR_DEV_PARAMS_V1 cmd Inband on device_id:%hu��AudDevMgr.cpp:ADM: Processing ADM_CMD_SET_MTMX_STRTR_DEV_PARAMS_V1 cmd Out-of-band on device_id:%hu�AudDevMgr.cpp:ADM: Physical memory address is not aligned to cache line, in set device param����AudDevMgr.cpp:ADM: Failed to map physical memory for SetDeviceParam�AudDevMgr.cpp:ADM: Failed to invalidate cache for SetDeviceParam����AudDevMgr.cpp:ADM: ADM_CMD_SET_MTMX_STRTR_DEV_PARAMS_V1 cmd on device_id[%hu] completed, result = %d����AudDevMgr.cpp:ADM: Processing ADM_CMD_GET_MTMX_STRTR_DEV_PARAMS_V1 cmd on device_id:%hu�AudDevMgr.cpp:ADM: ADM_CMD_GET_MTMX_STRTR_DEV_PARAMS_V1 cmd on device_id[%hu] completed, result = %d����AudDevMgr_MtMxIf.cpp:ADM: Failed to create msg for GET_DEV_PARAM cmd, result = %d���AudDevMgr_MtMxIf.cpp:ADM processing ADM_CMD_GET_MTMX_STRTR_DEV_PARAMS_V1.. In-Band!�AudDevMgr_MtMxIf.cpp:ADM: Failed to allocate APR pkt for InBand GetDeviceParams cmdrsp, result = %d�AudDevMgr_MtMxIf.cpp:ADM: Wait for ack failed, result = %d��AudDevMgr_MtMxIf.cpp:ADM processing ADM_CMD_GET_MTMX_STRTR_DEV_PARAMS_V1.. Out-of-Band!�AudDevMgr_MtMxIf.cpp:ADM: Out-band GetDeviceParam Incoming addr LSW is not aligned to cache line����AudDevMgr_MtMxIf.cpp:ADM: Out-band GetPPParam failed Phy->Virt��AudDevMgr_MtMxIf.cpp:ADM: Out-band GetPPParam failed to flush cache�AudDevMgr_MtMxIf.cpp:ADM: ADM_CMD_GET_MTMX_STRTR_DEV_PARAMS_V1 completed, result = %d���AudDevMgr_StRtrIf.cpp:ADM: COPP thread join failed, joinResult = %d�AudDevMgr_StRtrIf.cpp:ADM: COPP thread joined success���AudDevMgr_StRtrIf.cpp:ADM Compressed: TX Session ID [0x%hX] --> Primary device port ID [%d]�AudDevMgr_StRtrIf.cpp:ADM device Set Param called on strrtr. Not currently supported. Exiting.��AudDevMgr_StRtrIf.cpp:ADM device Get Param called on strrtr. Not currently supported. Exiting.��AudDevMgr_Utils.cpp:ADM: Invalid sampling rate [%lu] for VPTX topology 0x%lX����AudioStreamMgr_SessionRespHandler.cpp:AudioStreamMgr [%u,%u]: Set PP Parm ACK Tok 0x%lx, Res 0x%lx, ParamId 0x%lx���AudioStreamMgr_SessionRespHandler.cpp:AudioStreamMgr [%u,%u]: Get PP Parm ACK Tok 0x%lx, Res 0x%lx��AudioStreamMgr_SessionRespHandler.cpp:AudioStreamMgr [%u,%u]: Get PP Parm ACK invalid ParamID 0x%lx�AudioStreamMgr_StreamCmdHandler.cpp:AudioStreamMgr [%u,%u]: Invalid svc id %lu �AudioStreamMgr_StreamCmdHandler.cpp:AudioStreamMgr [%u,%u]: Invalid node idx %lu for bit rate ��AudioStreamMgr_StreamCmdHandler.cpp:AudioStreamMgr [%u,%u]: Sending the parameter ID 0x%lx to decoder by default����AudioStreamMgr_StreamCmdHandler.cpp:AudioStreamMgr [%u, %u]: enter PoppCfgParamsCmdHandler node idx %lu�AudioStreamMgr_StreamCmdHandler.cpp:AudioStreamMgr [%u,%u]: Send SetParam to DecSvc[0x%lx,0x%lx]����AudioStreamMgr_StreamCmdHandler.cpp:AudioStreamMgr [%u,%u]: enter ASM_STREAM_CMD_GET_PP_PARAMS_V2/V3 command handler with node idx %lu��AudioStreamMgr_StreamCmdHandler.cpp:AudioStreamMgr [%u,%u]; enter AudioStreamMgr_StreamCmdRegisterEvents cmd handler����AudioStreamMgr_StreamCmdHandler.cpp:AudioStreamMgr [Session ID = %u,Stream ID = %u ]: cannot register events on a closed stream ����AudioStreamMgr_StreamCmdHandler.cpp:ASM Register events command is not supported as PP is not instantiated��AudioStreamMgr_StreamCmdHandler.cpp:AudioStreamMgr [Session ID = %u, Stream ID = %u]: RegisterEncDecEvents: Cannot register for encdec params on a closed stream!���AudioStreamMgr_StreamCmdHandler.cpp:AudioStreamMgr [%u,%u]: RegisterEncDecEvents: Invalid version %lu ��AudioStreamMgr_StreamCmdHandler.cpp:AudioStreamMgr [%u,%u]: RegisterEncDecEvents: Invalid svc id %lu ���AudioStreamMgr_StreamCmdHandler.cpp:AudioStreamMgr [%u,%u]: RegisterEncDecEvents: invalid service handle����AudioStreamMgr_StreamUtil.cpp:AudioStreamMgr [Session ID = %u, Stream ID = %u]: RegisterEncDecEvents: Failed to create message in register events handler���AudioStreamMgr_StreamUtil.cpp:AudioStreamMgr [%u,%u]: Register Events:: Failed to send command��MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Processing Limiter Init����MixerSvc_Limiter.cpp:MtMx #%lu invalid port ID [%lu]����MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] pointer is NULL����MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Limiter Module not present in AMDB�MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Limiter get static properties failed���MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Failed to allocate memory for matrix limiter instance��MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Limiter init failed����MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Limiter instance failed to send set params�MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Limiter instance failed to send enable set params��MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Limiter instance failed to set property for input media format�MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Limiter instance failed to set property for output media format����MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Processing Limiter De-Init�MixerSvc_Limiter.cpp:Matrix Limiter: Limiter instance already freed�MixerSvc_Limiter.cpp:Matrix Limiter: failed to end Limiter instance�MixerSvc_Limiter.cpp:MtMx Limiter instance delay value: %lu�MixerSvc_Limiter.cpp:MtMx Limiter instance KPPS value: %lu��MixerSvc_Limiter.cpp:MtMx Limiter instance BW value: %lu����MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Limiter instance not created ��MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Limiter Set param id 0x%lu, Bad param size %lu�MixerSvc_Limiter.cpp:Limiter Set Config params, sLimMode=%x, sLimMakeUpGain=%x, sLimGc=%x, sLimDelay=%x, sLimMaxWait=%x, nLimThreshold=%x���MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] failed to send limiter config set params���MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Limiter module unsupported Param ID:0x%lu �MixerSvc_Limiter.cpp:Limiter Get Config params, sLimMode=%x, sLimMakeUpGain=%x, sLimGc=%x, sLimDelay=%x, sLimMaxWait=%x, nLimThreshold=%x���MixerSvc_Limiter.cpp:Limiter Get param, Bad param size %lu��MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] failed to send bypass mode limiter set params��MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] processed limiter bypass mode:%d ��MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Processing Limiter Set MediaFmt����MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Limiter instance failed to set property for input media format ����MixerSvc_Limiter.cpp:MtMx #%lu o/p port ID [%lu] Limiter instance failed to set property for output media format ���MixerSvc_Limiter.cpp:Matrix Limiter: Limiter instance pointer in NULL���MixerSvc_MsgHandlers.cpp:MtMx#%lu o/p port %lu Freeing Limiter module���MixerSvc_MsgHandlers.cpp:MtMx #%lu: Rcvd invalid Matrix ID [%lu], Leaving cmd [%lu] (MapRoutings) handler with status %d����MixerSvc_MsgHandlers.cpp:MtMx #%lu: i/p port %lu o/p port %lu:Error:Param size for set param is %lu which is not a multiple of 4. Aborting further processing.��MixerSvc_MsgHandlers.cpp:ERROR: MtMx #%lu i/p port %lu rcvd invalid data command Resync %lu, returning buffer���MixerSvc_MsgHandlers.cpp:MtMx #%lu i/p port %lu rcvd msg %lu (MtMx_MsgResync)���MixerSvc_MsgHandlers.cpp:MtMx #%lu i/p port %lu: triggering acc of local buffer after Resync was rcvd���MixerSvc_MsgHandlers.cpp:MtMx #%lu i/p port %lu: unable to trigger acc of local buffer after Resync was rcvd, mark acc pending��MixerSvc_MsgHandlers.cpp:MtMx #%lu: Scanning output ports for connected input ports..���MixerSvc_MsgHandlers.cpp:MtMx #%lu: Processing cmd %lu (SetMtMxParam) on o/p port ID [%lu]��MixerSvc_MsgHandlers.cpp:MtMx #%lu cmd [%lu] (SetMtMxParam) handler: Only ELITEMSG_PARAM_ID_CAL supported���MixerSvc_MsgHandlers.cpp:MtMx #%lu cmd [%lu] (SetMtMxParam) handler: rcvd invalid o/p port ID [%lu]�MixerSvc_MsgHandlers.cpp:MtMx #%lu cmd [%lu] (SetMtMxParam) handler: rcvd inactive o/p port ID [%lu]����MixerSvc_MsgHandlers.cpp:MtMx #%lu: o/p port %luTotal Payload Size: %d < Reqd Size: %d�MixerSvc_MsgHandlers.cpp:MtMx #%lu: o/p port %lu:Error:Param size for set param is %lu which is not a multiple of 4. Aborting further processing.���MixerSvc_MsgHandlers.cpp:MtMx #%lu cmd [%lu] (SetMtMxLimiterParam) called on o/p port ID [%lu] after map routing, skipping processing.��MixerSvc_MsgHandlers.cpp:MtMx #%lu: o/p port %lu recieved limiter enable:%lu for device native_mode: %lu, and bit-width:%lu�MixerSvc_MsgHandlers.cpp:MtMx #%lu:o/p port %lu Limiter init success����MixerSvc_MsgHandlers.cpp:MtMx #%lu: o/p port %lu Limiter init failed, result= %lu���MixerSvc_MsgHandlers.cpp:MtMx #%lu: o/p port %lu Limiter config set failed, result= %lu�MixerSvc_MsgHandlers.cpp:MtMx #%lu: o/p port %lu Invalid Param ID: %lu�MixerSvc_MsgHandlers.cpp:MtMx #%lu:o/p port %lu Invalid Module ID: %lu��MixerSvc_MsgHandlers.cpp:MtMx #%lu: Leaving cmd [%lu] (SetMtMxParam) handler with status %d�MixerSvc_MsgHandlers.cpp:MtMx #%lu: Processing cmd %lu (GetMtMxParam) on o/p port ID [%lu]��MixerSvc_MsgHandlers.cpp:MtMx #%lu cmd [%lu] (GetMtMxParam) handler: Only ELITEMSG_PARAM_ID_CAL supported���MixerSvc_MsgHandlers.cpp:MtMx #%lu cmd [%lu] (GetMtMxParam) handler: rcvd invalid o/p port ID [%lu]�MixerSvc_MsgHandlers.cpp:MtMx #%lu: Leaving cmd [%lu] (GetMtMxParam) handler with status %d�MixerSvc_OutPortHandler.cpp:MtMx #%lu: Warning... i/p port %lu underflow setup failed with 0x%x�MixerSvc_Util.cpp:ERROR! MtMx #%lu: i/p,o/p [%lu, %lu], skipping pspd processing for this session. result=%d����MixerSvc_Util.cpp:ERROR! MtMx #%lu: i/p,o/p [%lu, %lu], skipping pspd processing for this session. result =%d���MixerSvc_Util.cpp:MtMx #%lu output port %lu acc. buffer: 0x%llx, size %lu���MixerSvc_Util.cpp:MtMx #%lu: send mediafmt update to limiter on O/p port %lu ���MixerSvc_Util.cpp:MtMx #%lu Delay updated: i/p port %lu: TotDelay (micro-sec) %lu ��StreamRouterSvc.cpp:intermediate buffer not defined or small. needed (actual, max) (%lu, %lu). max intermediate size %lu.���StreamRouterSvc.cpp:StreamRouter: Received Resync command from upstream!����StreamRouterSvc.cpp: Rx strtr maprouting invalid output_port_id %u��StreamRouterSvc_Utils.cpp: Failed to create output data queue %ld 33�StreamRouterSvc_Utils.cpp:Stream router: output buffer size of %lu (previous %lu) for fmt-id 0x%lx��StreamRouterSvc_Utils.cpp: Media Type Message: sr %ld, num_ch %ld, bits_per_sample %ld, format 0x%lx����StreamRouterSvc_Utils.cpp:stream_router#%lu, o/p port %lu,Delay updated:(micro-sec) %lu�AdspCoreSvc.cpp:AvsCoreSvc: GetFwkVersions Response packet allocation failed = %ld!����AdspCoreSvc.cpp:AvsCoreSvc: GetFwkVersions Response packet allocation failed. pPacket is NULL���AdspCoreSvc.cpp:AvsCoreSvc: GetFwkVersions Response send failed = %ld!�AdspCoreSvc.cpp:AVCS_CMD_ADD_POOL_PAGES : pool_id %lu, size %lu addr = 0x%lx%lx�AdspCoreSvc.cpp:AVCS_CMD_REMOVE_POOL_PAGES : pool_id %lu, size %lu addr = 0x%lx%lx��AdspCoreSvc.cpp:AVCS_CMD_ADD/REMOVE_POOL_PAGES: result = %lu����AdspCoreSvc_PerfMon.cpp:AVS CoreSvc: sending register/deregister to voice svc for ADSP PM vote event %d ����AdspCoreSvc_Utils.cpp:Failed to initialize license database!����AdspCoreSvc_Utils.cpp:Apr payload of insufficient size received for set license.����AdspCoreSvc_Utils.cpp:Invalid value %lu of the overwrite flag in set license command.���AdspCoreSvc_Utils.cpp:License with id %lu already exists.���AdspCoreSvc_Utils.cpp:Apr payload of insufficient size received for get license validation result command.��AdspCoreSvc_Utils.cpp:No license exists with id %lu�AdspCoreSvc_Utils.cpp:License with id %lu has not been validated����AdspCoreSvc_Utils.cpp:Failed to get size for license with id %lu����AdspCoreSvc_Utils.cpp:AvsCoreSvc: Get License Validation Result Response packet allocation failed = %ld!���AdspCoreSvc_Utils.cpp:AvsCoreSvc: Get License Validation Result Response packet allocation failed. pPacket is NULL��AdspCoreSvc_Utils.cpp:Failed to get license with id %lu�AdspCoreSvc_Utils.cpp:Mismatch in license size. Expected %lu Got %lu����AdspCoreSvc_Utils.cpp:AvsCoreSvc: Get License Validation Result Response send failed = %ld!����capi_v2_library_mem_mapper.cpp:capi_v2_lib_mem_mapper: Creating an instance of mem mapper library���capi_v2_library_mem_mapper.cpp:capi_v2_lib_mem_mapper: creation error���capi_v2_library_mem_mapper.cpp:capi_v2_lib_mem_mapper: registering mem map client failed. res = 0x%lx���capi_v2_library_mem_mapper.cpp:capi_v2_lib_mem_mapper: Destroying an instance of capi v2 mem mapper lib.����capi_v2_library_mem_mapper.cpp:capi_v2_lib_mem_mapper : unregistering mem map client failed. res = 0x%lx����capi_v2_library_mem_mapper.cpp:capi_v2_lib_mem_mapper: Received Invalid PoolID: %d��capi_v2_library_mem_mapper.cpp:capi_v2_lib_mem_mapper: Insufficient memory to allocate to shared memory region struct. It requires %lu bytes����capi_v2_library_mem_mapper.cpp:capi_v2_lib_mem_mapper: Failed to map the physical memory, error code is 0x%x����capi_v2_library_mem_mapper.cpp:capi_v2_lib_mem_mapper: Failed to map the virual memory, error code is 0x%x��capi_v2_library_mem_mapper.cpp:capi_v2_lib_mem_mapper: invalid property flag received in the payload, error code is 0x%x����capi_v2_library_mem_mapper.cpp:capi_v2_lib_mem_mapper: Failed to unmap the phyiscal memory, error code is 0x%x��capi_v2_library_mem_mapper.cpp:capi_v2_lib_mem_mapperPhy to Virt Failed(paddr, vaddr)-->(%lx%lx, %lx)���ListenProcSvc_Util.cpp:MAX KWD END DELAY Bytes %u���vdec_svc.cpp:VCP: Error reading bufq , result(%d) session(%lx)��vdec_svc.cpp:VCP: Vdec in fatal state result=%x session(%lx)����vdec_svc.cpp:VCP: Vdec setting hpcm context, memmmap handle (%x), client addr (%x), client port (%x) direction (%x)�vdec_svc.cpp:VCP: vdec set param error %u, mod %lx,instance %lx, param %lx, session(%lx)����vdec_svc.cpp:VCP: Error! Vdec main received bad param size, mod %ld, param %ld, size %ld!!��vdec_svc.cpp:vdec_set_param_cmd(): critical error(%lx) returned by module(%#lx) instance(%d) for pid(%#lx)��vdec_svc.cpp:VCP: Invalid param id (%lx) session(%lx)���vdec_svc.cpp:VCP: Vdec get param, mod id(0x%lx), instance(%d), param id (0x%lx), result(0x%x) session(0x%lx)����vdec_svc.cpp:VCP: This function should never be called. We never wait for buf mask��vdec_svc_utils.cpp:VCP: vdec_beamr_set_param(): dec capi module ptr is NULL�vdec_svc_utils.cpp:VCP: vdec_beamr_set_param(): failed. result(%ld)�vdec_svc_utils.cpp:VCP: vdec_beamr_set_param():: disabling BeAMR for mediatype(%x), session(%#lx)���vdec_svc_utils.cpp:vdec_beamr_set_param: BeAMR enable/disable is unspported for media_type(0x%lx)���vdec_svc_utils.cpp:vdec_beamr_set_param: BeAMR enable/disable is unsupported in RUN state for AMR-NB/AMR-NB-IF2 vocoder�vdec_svc_utils.cpp:vdec_beamr_set_param: BeAMR enable/disable is unspported while other BBWE module is alredy enabled, BBWE_flag(%d)����vdec_svc_utils.cpp:VCP: vdec_beamr_set_param():: Error!! Bad Param id. session(%#lx)����vdec_svc_utils.cpp:VCP: vdec_beamr_get_param():: Error!! Bad Param Size. session(%#lx)��vdec_svc_utils.cpp:VCP: vdec_beamr_get_param():: Error!! Bad Param id. session(%#lx)����venc_svc.cpp:VCP: Venc in fatal state result=%x session(%lx)����venc_svc.cpp:VCP: Venc setting hpcm context, memmmap handle (%x), client addr (%x), client port (%x) direction %d���venc_svc.cpp:VCP: venc set param error %u, mod %lx,instance %lx, param %lx, session(%lx)����venc_svc.cpp:VCP: Failed to Open AVTimer Driver for venc session(%x)����venc_svc.cpp:VCP: set_param failed for module(%lx) param id (%lx) session(%lx). Aborting����venc_svc.cpp:VCP: Invalid param id (%lx) session(%lx)���venc_svc.cpp:VCP: Venc get param, mod id(0x%lx), instance(%d), param id (0x%lx), result(0x%x) session(0x%lx)����venc_svc.cpp:VCP: VENC VDS drop now, session(%x)����venc_svc.cpp:VCP: VENC failed to create message, result %d, session(%x)�venc_svc.cpp:VCP: VENC failed to deliver command, result %d, session(%x)����venc_svc.cpp:VCP: VENC wait failed, result %d, session(%x)��Vprx_Svc.cpp:VCP: vprx_create enter Topology(%lx) samping_rate(%ld) num_channels(%ld) session(%lx)��Vprx_Svc.cpp:VCP: vprx received num_channels(%ld). Setting it to 1��Vprx_Svc.cpp:VCP: VPRx resync is detected, ignoring inst drift. session(%x)�Vprx_Svc.cpp:VCP: vprx set param error %u, mod %lx,instance %lx, param %lx, session(%lx)����Vprx_Svc.cpp:VCP: VPRx ouput num_channels = %d. Ignoring session(%x) 34���Vprx_Svc.cpp:VCP: Failed Vprx start oneshot timer to Vtm session(%lx)���Vprx_Svc.cpp:VCP: Vprx in fatal state!! result(%d) session(%x)��Vprx_Svc.cpp:VCP: Vprx in fatal state!!result(%d) session(%x)���Vprx_Svc.cpp:VCP: vprx_re_config_cmd enter num_channels(%ld). Setting it to 1���Vprx_utils.cpp:VCP: failed to send Key for AVC_RVE IMC, ModuleId(%lx), result(%lu), session (%lx)���Vprx_utils.cpp:VCP: failed to send Key for AVCTx IMC, ModuleId(%lx), result(%lu), session (%lx)�Vprx_utils.cpp:VCP: ERROR !! un supported fwk extention : %lx���Vprx_Modules.cpp:VCP: Error! Invalid cal_param_id_ver(%#lx). Aborting set param�Vprx_Modules.cpp:VCP: Error! Vprx received bad param size, mod %lx, instance %lx, param %lx, size %ld!!�Vprx_Modules.cpp:VCP: set_param(): Unsupported set vprx module(%#lx), instance(%lx) - Ignoring��Vprx_Modules.cpp:VCP: Error!! Unknown cal param version (0x%lx). session(0x%lx) 35����Vprx_Modules.cpp:VCP: get_param(): Unsupported get vprx module(%#lx) instance(%lx). Ignoring����Vprx_Modules.cpp:VCP: Rx get param done, mod id(0x%lx), instance_id(%lx), param id (0x%lx), result(0x%x) session(0x%lx) 36����Vprx_Modules.cpp:VCP: get_kpps(): ModId(0x%lx) Instance(%d) reported KPPS(%ld), is enabled(%d)��Vprx_Modules.cpp:VCP: get_delay(): ModId(0x%lx) Instance(%d) reported delay(%d), is enabled(%d)�Vprx_Modules.cpp:VCP: Module(0x%#lx) instance(0x%lx) provided insufficient size(%lu) for KPPS event�Vprx_Modules.cpp:VCP: vprx_capi_v2_cb_func: module(%#lx) instance(%#lx) updated KPPS(%d)����Vprx_Modules.cpp:VCP: Module(0x%#lx) instance(0x%lx) provided insufficient size(%lu) for delay event����Vprx_Modules.cpp:VCP: vprx_capi_v2_cb_func: module(%#lx) instance(%#lx) updated delay(%d)���Vprx_Modules.cpp:VCP: Module(0x%#lx) instance(0x%lx) provided insufficient size(%lu) for output media fmt event�Vprx_Modules.cpp:VCP: Module(%#lx) instance(0x%lx) raised output media fmt. Updating output media fmt during process is not supported���Vprx_Modules.cpp:VCP: module(%#lx) instance(0x%lx) has raised same output media fmt. Ignoring���Vprx_Modules.cpp:VCP: module(%#lx) instance(0x%lx) has raised media fmt. num_channel(%ld), samp_rate(%ld)���Vprx_Modules.cpp:VCP: module(%#lx) instance(0x%lx) has raised output media fmt but is disabled. Will be propagated when enabled�Vprx_Modules.cpp:VCP: Module(0x%lx) instance(0x%lx) raised output media type. Already propagating media fmt�Vprx_Modules.cpp:VCP: Module(0x%lx) instance(0x%lx) updated process state prev(%lu), new state(%lu)�Vprx_Modules.cpp:VCP: Unsupported event %d raised by module(%#lx) instance(%#lx)����Vptx_Svc.cpp:VCP: NEAR resync is detected ignoring inst drift. session(%x)��Vptx_Svc.cpp:VCP: FAR resync is detected ignoring inst drift. session(%x)���Vptx_Svc.cpp:VCP: Vptx set param error %u, mod %lx, instance %lx param %lx, session(%lx)����Vptx_Svc.cpp:VCP: vptx_create enter Topology(%lx), sampling_rate(%lx) num_mics(%d) num_ref_channels (%d) session(%lx) ��Vptx_Svc.cpp:VCP: VPTX thread priority in audio path is %d session(%x)��Vptx_Svc.cpp:VCP: VPTX thread priority in voice path is %d session(%x)��Vptx_Svc.cpp:VCP: near channel map is not received. using defaults. session(%x)�Vptx_Svc.cpp:VCP: far channel map is not received. using defaults. session(%x)��Vptx_Svc.cpp:VCP: Vptx proc tick received, VFR Mode(%d)�Vptx_Svc.cpp:VCP: Vptx in fatal state!! result (%d) session(%x)�Vptx_Svc.cpp:VCP: Vptx in fatal state!! result(%x) session(%x)��Vptx_Svc.cpp:VCP: VPM_CMD_SET_TIMING_PARAMS vptx_proc_start_samples = (%d) and max_tx_processing_time = (%d) session(%lx)���Vptx_Svc.cpp:VCP: vptx_set_ep_id(): Psuedo Port, hence making VPTX non real time/ faster than real time�Vptx_Svc.cpp:VCP: vptx_set_ep_id(): Real Port, hence making VPTX real time��Vptx_Svc.cpp:VCP: vptx_set_ep_id(): Error!! Service in RUN state����Vptx_Svc.cpp:VCP: vptx_set_ep_id(): VPTx sending ack for set ep id. session (0x%lx). ep_ids [ 0x%hx, 0x%hx ]����Vptx_Svc.cpp:VCP: Vptx Done waiting for proc signal from VTM; session (%x)��Vptx_utils.cpp:VCP: ecns_rtm_monitoring is supported����Vptx_utils.cpp:VCP: RTM log_code set prop failed for moduleId(%lu), session(%lx)����Vptx_utils.cpp:VCP: failed to send Key for AVC_RVE IMC,ModuleId(%lx), result(%lu), session (%lx)����Vptx_utils.cpp:VCP: failed to send Key for AVCTx IMC,ModuleId(%lx), result(%lu), session (%lx)��Vptx_utils.cpp:VCP: check and enable SS in HPCM CAPI����Vptx_utils.cpp:VCP: HPCM SS enable set cust prop failed for moduleId(%lu), session(%lx)�Vptx_utils.cpp:VCP: ERROR !! un supported fwk extention : %lx���Vptx_utils.cpp:VCP: VP3 Error!!! Either ECNS module(%p) is not present or it does not support VP3, session(%lx)�Vptx_utils.cpp:VCP: STT Error!!! Either ECNS module(%p) is not present or it does not support STT, session(%lx)�Vptx_utils.cpp:VCP: Error in getting facing angle threshold from ECNS capi. result (%#lx), session(%lx)�Vptx_utils.cpp:VCP: vptx QMI Interfacing failed with result (%#lx) session(%lx)���Vptx_utils.cpp:VCP: Failed to Allocate Memory to QMI structure!! session(%x)���Vptx_utils.cpp:VCP: Failed to Allocate Memory to QMI params in vptx init!! session(%x)�Vptx_utils.cpp:VCP: Vptx session # (%lx): Received indication from sensors at frame #%d, State = %d�Vptx_utils.cpp:VCP: Vptx session # (%lx): QMI Response for Sensors succeeded����Vptx_utils.cpp:VCP: vptx_fprov2_set_holding_pattern(): ERROR!! failed to set facing pattern, result(%#lx). session(%#lx)����Vptx_utils.cpp:VCP: vptx_fprov2_set_holding_pattern(): ERROR!! memory for ecns capi is not allocated. session(%#lx)�Vptx_Modules.cpp:VCP: get_kpps(): ModId(0x%lx) Instance(%d) reported KPPS(%ld), is enabled(%d)��Vptx_Modules.cpp:VCP: get_delay(): ModId(0x%lx) Instance(%d) reported delay(%d), is enabled(%d)�Vptx_Modules.cpp:VCP: get_delay(): total vptx algo delay (%d)���Vptx_Modules.cpp:VCP: Failed to allocate memory for VPTX circbuf!! session(%x)��Vptx_Modules.cpp:VCP: VPTX session(%lx) set topology framesize failed with error (%lu), bailing out topo creation���Vptx_Modules.cpp:VCP: Error! Invalid cal_param_id_ver(%#lx). Aborting set param�Vptx_Modules.cpp:VCP: Error! Vptx received bad param size, mod %d, instance(%ld) param %d, size %d!!����Vptx_Modules.cpp:VCP: set_param(): Unsupported set vptx module(%#lx), instance(%lx) - ignoring��Vptx_Modules.cpp:VCP: Error!! Unknown cal param version (0x%lx). session(0x%lx) 37����Vptx_Modules.cpp:VCP: GET Error. Not ready to return parameters in Stop state���Vptx_Modules.cpp:VCP: get_param(): Unsupported get vptx module(%#lx) instance(%lx). Ignoring����Vptx_Modules.cpp:VCP: Tx get param done, mod id(0x%lx), instance_id(%lx), param id (0x%lx), result(0x%x) session(0x%lx) 38����Vptx_Modules.cpp:VCP: setting dynamic resampler output media format (%lu), session(%lx)�Vptx_Modules.cpp:VCP: ERROR!! vptx_process_port_threshold_module No scratch memory allocated����Vptx_Modules.cpp:VCP: Vptx event callback invoked, event_id %d, module %lx instance %lx�Vptx_Modules.cpp:VCP: ERROR !!! incorrect payload size for output media type of module with module id 0x%lx�Vptx_Modules.cpp:VCP: ERROR !!! incorrect port idx %lu for output media type of module with module id 0x%lx�Vptx_Modules.cpp:VCP: VPTx received insufficient size for port data threshold change, size(0x%lx)���Vptx_Modules.cpp:VCP: Port data threshold event after topology creation is not supported, module id (0x%lx)�Vptx_Modules.cpp:VCP: Module with id (0x%lx) raised PORT_DATA_THRESHOLD (%lu) on input port index %lu���Vptx_Modules.cpp:VCP: Module with id (0x%lx) raised PORT_DATA_THRESHOLD_CHANGE event with Inavlid input port index %lu��Vptx_Modules.cpp:VCP: Module with id (0x%lx) raised PORT_DATA_THRESHOLD (%lu) on output port index %lu��Vptx_Modules.cpp:VCP: Module with id (0x%lx) raised PORT_DATA_THRESHOLD_CHANGE event with Inavlid output port index %lu�Vptx_Modules.cpp:VCP: vptx topo framesize module id (0x%lx) data threshold (%lu) ms is not supported, disabling the module��Vptx_Modules.cpp:VCP: vptx topo framesize module id (0x%lx) multiple ports raising different data threshold, not supported��Vptx_Modules.cpp:VCP: vptx topo num_1ms_frame_block_process (%d), near in samples (%d), far in samples (%d), session (%lx)��cvd_cal.c:cvd_cal_get_minor_version():Invalid handle����cvd_cal.c:cvd_cal_find_vol_cal_format():minor_version %d����cvd_cal.c:cvd_cal_obj_stat(): Objects used=(%d)�cvd_devcfg_parser.c:cvd_devcfg_parser_get_clock_and_bus_preempt_margin_config(): Invalid input table����cvd_devcfg_parser.c:cvd_devcfg_parser_get_clock_and_bus_preempt_margin_config(): Invalid input cvd_devcfg_parser_preemption_safety_margins_table����cvd_devcfg_parser.c:cvd_devcfg_parser_get_clock_and_bus_preempt_margin_config(): Invalid mmpm info��cvd_devcfg_parser.c:cvd_devcfg_parser: voice_sessions: %d, nb_streams: %d, wb_streams: %dswb_streams: %d, fb_plus_streams: %d, nb_vocprocs: %d��cvd_devcfg_parser.c:cvd_devcfg_parser: wb_vocprocs: %d, swb_vocprocs: %d, fb_plus_vocprocs: %dtx_topology_id: 0x%08X, rx_topology_id: 0x%08X, media_id: 0x%04X, vfr_mode: 0x%08X����cvd_devcfg_parser.c:cvd_devcfg_parser: core_clock_hz %d ����cvd_devcfg_parser.c:cvd_devcfg_parser: cycles_per_thousand_instr_packets %d, sleep_latency_us %d����cvd_devcfg_parser.c:cvd_devcfg_parser: cvd_devcfg_parser_preemption_safety_margins_table pointer is NULL, hence default values set��cvd_devcfg_parser.c:cvd_devcfg_parser: safety margins - vptx: %d, vprx: %d, venc: %d, vdec: %d��cvd_devcfg_parser.c:cvd_devcfg_parser_get_clock_and_bus_preempt_margin_config(): numOfBw=%d, Bandwidth values: Bytes per sec (%d), Usage percentage (%d)����cvd_devcfg_parser.c:cvd_devcfg_parser_get_clock_and_bus_preempt_margin_config(): Get clock config failed����cvd_devcfg_parser.c:cvd_devcfg_parser_get_clock_and_bus_preempt_margin_config(): Get bus config failed��cvd_devcfg_parser.c:cvd_devcfg_parser_get_clock_and_bus_preempt_margin_config(): Get preemption_safety_margins config failed����cvd_diag.c:cvd_diag_cmd_processing(): Command:(%d)��cvd_diag.c:cvd_diag_cmd_processing(): Diag Packet could not be allocated����cvd_diag.c:cvd_diag_cmd_processing(): Rsp(0x%08x)���cvd_diag.c:cvd_diag_register_with_diag: Registering to DIAG_SUBSYS_CVD��cvd_mem_mapper.c:cvd_mem_mapper_map_physical(): addr_lsw: 0x%08X, addr_msw: 0x%08X, size = %d,is_cached: %d, cache_line_size: %d, access_mask: %d���cvd_mem_mapper.c:cvd_mem_mapper_obj_stat(): Objects used=(%d)���cvd_utils_common.c:is_cvd_utils_obj_freed(): Objects active in cvd mem mapper:(%d)��cvd_utils_common.c:is_cvd_utils_obj_freed(): Objects active in cvd cal:(%d)�cvd_utils_common.c:is_cvd_utils_obj_freed(): Objects active in mvm:(%d)�vccm.c:vccm_mmpm_request_clocks(): client ID: %d, MPSS: %d, ADSP Floor clock: %dMHz�vccm.c:vccm_mmpm_request_clocks(): BW req master port: %d, Slave port: %dBytes per sec: %d, Usage percentage: %d, Usage type: %d����vccm.c:vccm_mmpm_release_clocks(): Releasing MMPM resources for client ID = %d��cvd_vfr_module.c:CVD_VFR: Error[0x%08x]�cvd_vfr_module.c:CVD_VFR: SUBSCRIBE_VTM: cvd_vfr_client_count=%d����cvd_vfr_module.c:CVD_VFR: UNSUBSCRIBE_VTM: cvd_vfr_client_count=%d��rcinit_dal.c:ADSP:Task # %x exception restart grp %x����rcinit_dal.c:ADSP:Task # %x exception end grp %x����rcinit_dal.c:ADSP:Task # %x exit grp %x�rcinit_dal.c:ADSP:Task exit grp %x no context���rcinit_qurt.c:ADSP:Task # %x exception restart grp %x���rcinit_qurt.c:ADSP:Task # %x exception end grp %x���rcinit_qurt.c:ADSP:Task # %x exit grp %x����rcinit_qurt.c:ADSP:Task exit grp %x no context��rcinit_term.c:ADSP:Bailout timer set %d�rcinit_term.c:ADSP:Group %x timer set %d����rcinit_term.c:ADSP:Terminate begin registrants %d grp %x����rcinit_term.c:ADSP:Bailout timer termfn processing grp��rcinit_term.c:ADSP:Bailout timer expire grp %x��rcinit_term.c:ADSP:Handshake count %d/%d grp %x�rcinit_term.c:ADSP:termfn processing registrants %d grp %x remaining grp timeout %d�rcinit_term.c:ADSP:Terminate end grp %x�rcinit_term.c:ADSP:ARTIFICIAL LATENCY BEG -- REMOVE FROM PRODUCTION USE, IMAGE OWNER SUPPLIES DALCFG����rcinit_term.c:ADSP:ARTIFICIAL LATENCY ACTIVE -- REMOVE FROM PRODUCTION USE, IMAGE OWNER SUPPLIES DALCFG�rcinit_term.c:ADSP:ARTIFICIAL LATENCY END -- REMOVE FROM PRODUCTION USE, IMAGE OWNER SUPPLIES DALCFG����rcinit_term.c:ADSP:Termination begins���rcinit_term.c:ADSP:Termination ends�AFEEncDecCmn_If.cpp:afe_create_enc_dec: port_id: 0x%x port afe_create_enc_svc error: 0x%x���AFEEncDecCmn_If.cpp:afe_create_enc_dec: port_id: 0x%x port afe_create_dec_svc error: 0x%x���AFEEncDecCmn_If.cpp:freeing up encoder cached params: 0x%p for port 0x%x����AFEEncDecCmn_If.cpp:freeing up enc_cfg_blk_ptr: 0x%p for port 0x%x��AFEEncDecCmn_If.cpp:freeing up decoder cached params: 0x%p for port 0x%x����AFEEncDecCmn_If.cpp:freeing up port_enc_dec_ptr: 0x%p for port 0x%x�AFEEncDecCmn_If.cpp:error: afe_create_enc_dec_dev_buffers port_enc_dec_ptr is null on port 0x%x�AFEEncDecCmn_If.cpp:afe_create_dec_dev_buffers: malloc failure while allocating working_buf_dev for port 0x%x���AFEEncDecCmn_If.cpp:afe_create_dec_dev_buffers: malloc failure while allocating working_buf_int_dev for port 0x%x���AFEEncDecCmn_If.cpp:afe_create_dec_dev_buffers: freeing up working_buf_dev: 0x%p for port 0x%x��AFEEncDecCmn_If.cpp:Port 0x%x [working_buf_size_int_dev, working_buf_size_dev] [%lu, %lu]���AFEEncDecCmn_If.cpp:Port 0x%x [working_buf_int_dev, working_buf_dev] [0x%p, 0x%p]���AFEEncDecCmn_If.cpp:afe_set_enc_dec_params: port_id: 0x%x Cannot set param on enc/dec in RUN state for non enc/dec use case����AFEDecoder_If.cpp:error: afe_create_dec_svc port_enc_dec_ptr is null on port 0x%x���AFEDecoder_If.cpp:error: afe_create_dec_svc port fs %lu does not match dev fs %lu on port 0x%x��AFEDecoder_If.cpp:afe_create_dec_svc: port_id: 0x%x port afe_create_dec error: 0x%x�AFEDecoder_If.cpp:afe_create_dec_svc: port_id: 0x%x port error, invalid num_buffers_afe_to_dec: %d��AFEDecoder_If.cpp:afe_create_dec_svc qurt_elite_queue_create failure for port 0x%x, error: 0x%x�AFEDecoder_If.cpp:afe_create_dec_svc qurt_elite_channel_addq failure for port 0x%x, error: 0x%x�AFEDecoder_If.cpp:afe_create_dec_svc Error during allocation of buffer#%d in AFE-dec Q for port 0x%x����AFEDecoder_If.cpp:afe_create_dec_svc Error during pushing of buffer#%d in AFE-dec Q for port 0x%x���AFEDecoder_If.cpp:afe_create_dec_svc Port 0x%x buffer# %d: [working_buf_size_dec_in, req_size] [%lu, %lu]���AFEDecoder_If.cpp:afe_create_dec_svc afe_connect_dec_to_afe failure for port 0x%x, error: 0x%x��AFEDecoder_If.cpp:afe_create_dec_svc: port 0x%x Error - afe_set_dec_params_utils local result: 0x%x�AFEDecoder_If.cpp:afe_create_dec_svc: port 0x%x Unsupported parameter. Ignoring.����AFEDecoder_If.cpp:afe_create_dec_svc: port 0x%x Error - afe_set_dec_params_utils aggregate result: 0x%x�AFEDecoder_If.cpp:afe_create_dec_svc: port 0x%x Error - afe_send_media_type_to_decoder_svc result: 0x%x����AFEDecoder_If.cpp:afe_create_dec_svc: port 0x%x MMPM vote request failed result: 0x%x���AFEDecoder_If.cpp:afe_create_dec_svc: decoder, all queues, buffers setup successfully for port 0x%x, num_buffers_afe_to_dec %lu����AFEDecoder_If.cpp:afe_set_dec_params: port_id: 0x%x Error in malloc of afe_port_decoder_ptr, exiting.���AFEDecoder_If.cpp:afe_set_dec_params: port_id: 0x%x Error - cannot set dec_fmt_id in RUN state, exiting.����AFEDecoder_If.cpp:afe_set_dec_params: port_id: 0x%x Error - dec_fmt_id cannot be zero.��AFEDecoder_If.cpp:afe_set_dec_params: port_id: 0x%x Error - cannot set dec_depacketizer_id in RUN state, exiting.���AFEDecoder_If.cpp:afe_set_dec_params: port_id: 0x%x Error - dec_depacketizer_id cannot be zero.�AFEDecoder_If.cpp:afe_set_dec_params: port_id: 0x%x Error - afe_set_dec_params_utils result: 0x%x��AFEDecoder_If.cpp:AFEDecoder_If: Out of memory trying to malloc param_info_t. Malloc size: %lu.�AFEDecoder_If.cpp:AFEEncoder_If: Out of memory trying to malloc new_buffer. Malloc size: %lu.���AFEDecoder_If.cpp:afe_destroy_dec_svc: returning held buffer back to decoder for port 0x%x��AFEDecoder_If.cpp:afe_destroy_dec_svc: issuing afe_port_disconnect_dec_from_afe for port 0x%x��AFEDecoder_If.cpp:afe_destroy_dec_svc: emptying decoder-afe queue for port 0x%x�AFEDecoder_If.cpp:afe_destroy_dec_svc: calling afe_port_dev_destroy_dec for port 0x%x���AFEDecoder_If.cpp:afe_destroy_dec_svc: destroying afe-decoder buf queue for port 0x%x, #bufs: %lu���AFEDecoder_If.cpp:afe_destroy_dec_svc: destroying downstream data queue for port 0x%x���AFEDecoder_If.cpp:afe_destroy_dec_svc: destroying afe_dec_channel for port 0x%x�AFEDecoder_If.cpp:afe_destroy_dec_svc: freeing up working_buf_dev: 0x%p for port 0x%x���AFEDecoder_If.cpp:afe_destroy_dec_svc: freeing up working_buf_int_dev: 0x%p for port 0x%x���AFEDecoder_If.cpp:afe_destroy_dec_svc: freeing up cached_params_list: 0x%p for port 0x%x����AFEDecoder_If.cpp:afe_destroy_dec_svc: freeing up port_enc_dec_ptr: 0x%p for port 0x%x��AFEDecoder_If.cpp:afe_create_dec: port_id: 0x%x port, error: invalid input dec [fmt_id or depack id]: [%lu or %lu]��AFEDecoder_If.cpp:afe_create_dec: port_id: 0x%x port, AudioDecSvc_Create error: 0x%x����AFEDecoder_If.cpp:afe_create_dec: port_id: 0x%x port, AudioDecSvc_Create success, threadID: %x��AFEDecoder_If.cpp:afe_connect_dec_to_afe: port_id: 0x%x failed to create message����AFEDecoder_If.cpp: afe_connect_dec_to_afe: port_id: 0x%x failed to push cmd to dec svc��AFEDecoder_If.cpp:afe_connect_dec_to_afe: port_id: 0x%x wait for ack failed�AFEDecoder_If.cpp:afe_connect_dec_to_afe: port_id: 0x%x error [0x%x] in cmd ack�AFEDecoder_If.cpp:afe_set_dec_params_utils: port_id: 0x%x Failed to create message��AFEDecoder_If.cpp: afe_set_dec_params_utils: port_id: 0x%x failed to push cmd to dec svc����AFEDecoder_If.cpp:afe_set_dec_params_utils: port_id: 0x%x wait for ack failed���AFEDecoder_If.cpp:afe_set_dec_params_utils: port_id: 0x%x error [0x%x] in cmd ack���AFEDecoder_If.cpp:afe_send_media_type_to_decoder: port_id: 0x%x Failed to create media fmt message��AFEDecoder_If.cpp:afe_send_media_type_to_decoder: port_id: 0x%x not supported for num ch = %u���AFEDecoder_If.cpp:afe_send_media_type_to_decoder port_id: 0x%x failed to send media type message����AFEDecoder_If.cpp:afe_send_data_to_decoder issued, port_id: 0x%x but qurt_elite_queue_pop_front returned 0x%x (overrun)�AFEDecoder_If.cpp:afe_send_data_to_decoder port_id: 0x%x failed to deliver buffer downstream. Dropping��AFEDecoder_If.cpp:afe_get_data_from_decoder issued, port_id: 0x%x but qurt_elite_queue_pop_front returned 0x%x (underrun)���AFEDecoder_If.cpp:afe_get_data_from_decoder, port_id: 0x%x dropping data due to bad state (invalid media type)��AFEDecoder_If.cpp:afe_get_data_from_decoder, port_id: 0x%x opcode: 0x%x, media type�AFEDecoder_If.cpp:afe_get_data_from_decoder, port_id: 0x%x rcvd invalid unMediaTypeFormat [%d]. returned back to dec_svc����AFEDecoder_If.cpp:afe_get_data_from_decoder, port_id: 0x%x rcvd mismatched media type.[exp, act]: #ch: [%lu, %d], bw [%d, %d], SR [%lu, %lu]����AFEDecoder_If.cpp:afe_get_data_from_decoder, port_id: 0x%x rcvd correct media type.[exp, act]: #ch: [%lu, %d], bw [%d, %d], SR [%lu, %lu]���AFEDecoder_If.cpp:afe_get_data_from_decoder, port_id: 0x%x rcvd invalid unMediaFormatID [%d]. returned back to dec_svc��AFEDecoder_If.cpp:afe_get_data_from_decoder issued, port_id: 0x%x opcode: 0x%x, returned back to dec_svc����AFEDecoder_If.cpp:afe_get_data_from_decoder port_id: 0x%x decoder service, underrun�AFEDecoder_If.cpp:afe_disconnect_dec_from_afe: port_id: 0x%x failed to create message���AFEDecoder_If.cpp: afe_disconnect_dec_from_afe: port_id: 0x%x failed to push cmd to dec svc�AFEDecoder_If.cpp:afe_disconnect_dec_from_afe: port_id: 0x%x wait for ack failed����AFEDecoder_If.cpp:afe_disconnect_dec_from_afe: port_id: 0x%x error [0x%x] in cmd ack����AFEDecoder_If.cpp:afe_dev_destroy_dec: port_id: 0x%x failed to create message���AFEDecoder_If.cpp: afe_dev_destroy_dec: port_id: 0x%x failed to push cmd to dec svc�AFEDecoder_If.cpp:afe_dev_destroy_dec: port_id: 0x%x wait for ack failed����AFEEncoder_If.cpp:error: afe_create_enc_svc port_enc_dec_ptr is null on port 0x%x���AFEEncoder_If.cpp:error: afe_create_enc_svc port fs %lu and dev fs %lu are not integer multiples on port 0x%x�AFEEncoder_If.cpp:error: afe_create_enc_svc: port_id: 0x%x port afe_create_enc_svc has invalid [enc_cfg_blk_size] = [%lu] or null enc_cfg_blk_ptr���AFEEncoder_If.cpp:afe_create_enc_svc: port_id: 0x%x port afe_create_enc error: 0x%x�AFEEncoder_If.cpp:afe_create_enc_svc: port_id: 0x%x port afe_create_enc error, invalid num_buffers_afe_to_enc: %d���AFEEncoder_If.cpp:afe_create_enc_svc: qurt_elite_queue_create failure for port 0x%x, error: 0x%x����AFEEncoder_If.cpp:afe_create_enc_svc: qurt_elite_channel_addq failure for port 0x%x, error: 0x%x����AFEEncoder_If.cpp:afe_create_enc_svc: Error during allocation of buffer#%d in AFE-enc Q for port 0x%x���AFEEncoder_If.cpp:afe_create_enc_svc: Error during pushing of buffer#%d in AFE-enc Q for port 0x%x��AFEEncoder_If.cpp:afe_create_enc_svc: Port 0x%x buffer# %d: [working_buf_size_enc_in, req_size] [%lu, %lu]��AFEEncoder_If.cpp:afe_create_enc_svc: afe_connect_enc_to_afe failure for port 0x%x, error: 0x%x�AFEEncoder_If.cpp:afe_create_enc_svc: port 0x%x Error - afe_set_enc_params_utils result: 0x%x���AFEEncoder_If.cpp:afe_create_enc_svc: port 0x%x Error - afe_set_enc_params_utils local result: 0x%x�AFEEncoder_If.cpp:afe_create_enc_svc: port 0x%x Unsupported parameter. Ignoring.����AFEEncoder_If.cpp:afe_create_enc_svc: port 0x%x Error - afe_set_enc_params_utils aggregate result: 0x%x�AFEEncoder_If.cpp:afe_create_enc_svc: port 0x%x Error - afe_send_media_type_to_encoder result: 0x%x�AFEEncoder_If.cpp:afe_create_enc_svc: port 0x%x MMPM vote request failed result: 0x%x���AFEEncoder_If.cpp:afe_create_enc_svc: encoder, all queues, buffers setup successfully for port 0x%x, num_buffers_afe_to_enc %lu�AFEEncoder_If.cpp:afe_set_enc_params: port_id: 0x%x Error in malloc of afe_port_encoder_ptr, exiting.���AFEEncoder_If.cpp:afe_set_enc_params: port_id: 0x%x Error - cannot set enc_fmt_id in RUN state, exiting.���AFEEncoder_If.cpp:afe_set_enc_params: port_id: 0x%x Error - enc_fmt_id cannot be zero.�AFEEncoder_If.cpp:afe_set_enc_params: port_id: 0x%x Error - enc_cfg_blk_size cannot be zero.���AFEEncoder_If.cpp:afe_set_enc_params: port_id: 0x%x Error in malloc of enc_cfg_blk_ptr, exiting.����AFEEncoder_If.cpp:afe_set_enc_params: port_id: 0x%x Error - afe_port_dev_set_enc_params_utils result: 0x%x��AFEEncoder_If.cpp:afe_set_enc_params: port_id: 0x%x Error - cannot set enc_packetizer_id in RUN state, exiting.����AFEEncoder_If.cpp:afe_set_enc_params: port_id: 0x%x Error - enc_packetizer_id cannot be zero.��AFEEncoder_If.cpp:afe_set_enc_params: port_id: 0x%x Error - afe_port_dev_set_enc_params_utils result: 0x%x�AFEEncoder_If.cpp:AFEEncoder_If: Out of memory trying to malloc param_info_t. Malloc size: %lu.�AFEEncoder_If.cpp:AFEEncoder_If: Out of memory trying to malloc new_buffer. Malloc size: %lu.���AFEEncoder_If.cpp:afe_destroy_enc_svc: returning held buffer back to encoder for port 0x%x��AFEEncoder_If.cpp:afe_destroy_enc_svc: issuing afe_disconnect_enc_from_afe for port 0x%x����AFEEncoder_If.cpp:afe_destroy_enc_svc: emptying encoder-afe queue for port 0x%x�AFEEncoder_If.cpp:afe_destroy_enc_svc: calling afe_dev_destroy_enc for port 0x%x����AFEEncoder_If.cpp:afe_destroy_enc_svc: destroying afe-encoder buf queue for port 0x%x, #bufs: %lu���AFEEncoder_If.cpp:afe_destroy_enc_svc: destroying downstream data queue for port 0x%x���AFEEncoder_If.cpp:afe_destroy_enc_svc: destroying afe_enc_channel for port 0x%x�AFEEncoder_If.cpp:afe_destroy_enc_svc: freeing up working_buf_dev: 0x%p for port 0x%x���AFEEncoder_If.cpp:afe_destroy_enc_svc: freeing up working_buf_int_dev: 0x%p for port 0x%x���AFEEncoder_If.cpp:afe_destroy_enc_svc: freeing up enc_cfg_blk_ptr: 0x%p for port 0x%x���AFEEncoder_If.cpp:afe_destroy_enc_svc: freeing up cached_params_list: 0x%p for port 0x%x����AFEEncoder_If.cpp:afe_destroy_enc_svc: freeing up port_enc_dec_ptr: 0x%p for port 0x%x��AFEEncoder_If.cpp:afe_create_enc_svc: port_id: 0x%x port afe_create_enc, error: invalid input enc [fmt_id or pack id]: [%lu or %lu]�AFEEncoder_If.cpp:afe_create_enc_svc: port_id: 0x%x enc creation not supported for dev num ch = %u��AFEEncoder_If.cpp:afe_create_enc_svc: port_id: 0x%x port AudioEncSvc_Create error: 0x%x�AFEEncoder_If.cpp:afe_create_enc_svc: port_id: 0x%x port AudioEncSvc_Create success, threadID: %x���AFEEncoder_If.cpp:afe_connect_enc_to_afe: port_id: 0x%x failed to create message����AFEEncoder_If.cpp: afe_connect_enc_to_afe: port_id: 0x%x failed to push cmd to enc svc��AFEEncoder_If.cpp:afe_connect_enc_to_afe: port_id: 0x%x wait for ack failed�AFEEncoder_If.cpp:afe_connect_enc_to_afe: port_id: 0x%x error [0x%x] in cmd ack�AFEEncoder_If.cpp:afe_set_enc_params_utils: port_id: 0x%x Failed to create message��AFEEncoder_If.cpp: afe_set_enc_params_utils: port_id: 0x%x failed to push cmd to enc svc����AFEEncoder_If.cpp:afe_set_enc_params_utils: port_id: 0x%x wait for ack failed���AFEEncoder_If.cpp:afe_set_enc_params_utils: port_id: 0x%x error [0x%x] in cmd ack���AFEEncoder_If.cpp:afe_send_media_type_to_encoder: port_id: 0x%x Failed to create media fmt message��AFEEncoder_If.cpp:afe_send_media_type_to_encoder: port_id: 0x%x not supported for num ch = %u���AFEEncoder_If.cpp:afe_send_media_type_to_encoder port_id: 0x%x failed to send media type message����AFEEncoder_If.cpp:afe_send_media_type_to_encoder: port_id: 0x%x wait for ack failed�AFEEncoder_If.cpp:afe_send_media_type_to_encoder: port_id: 0x%x received media format ack from encoder��AFEEncoder_If.cpp:afe_send_data_to_encoder issued, port_id: 0x%x but qurt_elite_queue_pop_front returned 0x%x (overrun)�AFEEncoder_If.cpp:afe_send_data_to_encoder port_id: 0x%x failed to deliver buffer downstream. Dropping��AFEEncoder_If.cpp:afe_get_data_from_encoder issued, port_id: 0x%x but qurt_elite_queue_pop_front returned 0x%x (underrun)���AFEEncoder_If.cpp:afe_get_data_from_encoder, port_id: 0x%x opcode: 0x%x, media type�AFEEncoder_If.cpp:afe_get_data_from_encoder, port_id: 0x%x rcvd invalid unMediaTypeFormat [%d]. returned back to enc_svc����AFEEncoder_If.cpp:afe_get_data_from_encoder, port_id: 0x%x rcvd mismatched media type.[exp, act]: #ch: [%lu, %d], bw [%d, %d], SR [%lu, %lu]����AFEEncoder_If.cpp:afe_get_data_from_encoder, port_id: 0x%x rcvd correct media type.[exp, act]: #ch: [%lu, %d], bw [%d, %d], SR [%lu, %lu]���AFEEncoder_If.cpp:afe_get_data_from_encoder, port_id: 0x%x rcvd invalid unMediaFormatID [%d]. returned back to enc_svc��AFEEncoder_If.cpp:afe_get_data_from_encoder issued, port_id: 0x%x opcode: 0x%x, returned back to enc_svc����AFEEncoder_If.cpp:afe_get_data_from_encoder port_id: 0x%x encoder service, underrun�AFEEncoder_If.cpp:afe_disconnect_enc_from_afe: port_id: 0x%x failed to create message���AFEEncoder_If.cpp: afe_disconnect_enc_from_afe: port_id: 0x%x failed to push cmd to enc svc�AFEEncoder_If.cpp:afe_disconnect_enc_from_afe: port_id: 0x%x wait for ack failed����AFEEncoder_If.cpp:afe_disconnect_enc_from_afe: port_id: 0x%x error [0x%x] in cmd ack����AFEEncoder_If.cpp:afe_dev_destroy_enc: port_id: 0x%x failed to create message���AFEEncoder_If.cpp: afe_dev_destroy_enc: port_id: 0x%x failed to push cmd to enc svc�AFEEncoder_If.cpp:afe_dev_destroy_enc: port_id: 0x%x wait for ack failed����AFECdcPwrCtl.cpp:failed to update cdc pwr state to %d���AFECdcPwrCtl.cpp:Failed to Open SLIMBUS core driver�AFECdcPwrCtl.cpp:Unable to create clock gear event 0x%x�AFECdcPwrCtl.cpp:Unable to setup callback for clock gear event 0x%x�AFECdcPwrCtl.cpp:Unable to register for clock gear event 0x%x���clock_manager.cpp:vote for pwr OFF successful���clock_manager.cpp:AFE SVC: DalClock_SelectExternalSource unsupported: clk_reg_id: %d res: 0x%x��AudioDecSvc.cpp:Decoder service received null pointer(s).���AudioDecSvc.cpp:Decoder service received bad parameters.����AudioDecSvc.cpp:Capis creation failed with result = %d!! 39���AudioDecSvc_BufferUtil.cpp:PBQ:Failure on Out Buf Pop ��AudioDecSvc_BufferUtil.cpp:Relloacte failed ����AudioDecSvc_BufferUtil.cpp:Insufficient memory to allocate circ buf list %lu bytes��AudioDecSvc_BufferUtil.cpp:[0x%lx]: Recreated circ buf list %lu bytes, num bufs before %u, after %u�AudioDecSvc_BufferUtil.cpp:Creating %lu external buffers of size %lu����AudioDecSvc_BufferUtil.cpp:Handling PortDataThreshChangeEvent in dec service����AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu KPPS %lu���AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu Module BW (code,data) %lu %lu.��AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu process check set to %lu����AudioDecSvc_CapiV2CallbackHandler.cpp:AudioDecSvc: updating output media format for generic compressed pass-through�AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI Type %u changed bit stream format id from 0x%lx to 0x%lx����AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu output format updated.��AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: Input port %lu more than supported value���AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: Input port %lu event with new buf len = %lu.���AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: Output port %lu more than supported value��AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: Output port %lu event with new buf len = %lu.��AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu port data threshold update.�AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: Output port %lu metadata_available event���AudioDecSvc_CapiV2CallbackHandler.cpp: Error in callback function. The actual size %lu is less than the required size %lu for id %lu.���AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: COP frame length event: is nominal frame %lu, COP frame length %lu�AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: Error in callback function. ID 0x%lx not supported.����AudioDecSvc_CapiV2CallbackHandler.cpp:Failed to get an instance of the library to get capi v2 modules.��AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: event %lu not registered ��AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: event %lu no memory to allocate %lu ���AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: event %lu sent to client with error code %lu���AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: Error in callback function. ID %lu not supported.��AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: event %lx not registered ��AudioDecSvc_CapiV2CallbackHandler.cpp: CAPI %lu: media fmt has changed from %lx to %lx �AudioDecSvc_CapiV2Util.cpp: Couldn't find CAPI V2 for format 0x%lx��AudioDecSvc_CapiV2Util.cpp:Converter mode is not supported by Capi.�AudioDecSvc_CapiV2Util.cpp: Get Init Properties error. stack size mandatory�AudioDecSvc_CapiV2Util.cpp:error alloc mem for fmwk extension���AudioDecSvc_CapiV2Util.cpp:Get Static Properties error��AudioDecSvc_CapiV2Util.cpp:fmwk extensions needed & supported 0x%lx�AudioDecSvc_CapiV2Util.cpp:fmwk extensions not supported are 0x%lx. Module may not work correctly���AudioDecSvc_CapiV2Util.cpp:Failing since the fmwk doesnot support some extensions���AudioDecSvc_CapiV2Util.cpp: Get Init Properties error. Assuming out media fmt size to be zero���AudioDecSvc_CapiV2Util.cpp: Get Properties done with stack_size=%lu,max_metadata=%lu����AudioDecSvc_CapiV2Util.cpp: Get Port Data thresh Properties done with in_buffer_len=%lu, in_valid=%d, out_buffer_len=%lu, out_valid=%d. Out media size %lu��AudioDecSvc_CapiV2Util.cpp: Get in data thresh Properties error�AudioDecSvc_CapiV2Util.cpp: Get Init Properties error. Assuming capi requires data buffering����AudioDecSvc_CapiV2Util.cpp: Get Init Properties error. Assuming %u for input port thresh.���AudioDecSvc_CapiV2Util.cpp: CAPI returned input thresh 1 byte, changing it to %u����AudioDecSvc_CapiV2Util.cpp: setting bits per sample failed��AudioDecSvc_CapiV2Util.cpp: algorithmic reset failed����AudioDecSvc_CapiV2Util.cpp: the scratch buf is assumed to be big enough for media fmt. but it's not, and it's resulting in costly mallocs!��AudioDecSvc_CapiV2Util.cpp:Insufficient memory to allocate a bigger scratch buffer of size %lu bytes ���AudioDecSvc_CapiV2Util.cpp: setting media format failed�AudioDecSvc_CapiV2Util.cpp: get param for (param id 0x%lx) result %d����AudioDecSvc_CapiV2Util.cpp: get param for (param id 0x%lx) success��AudioDecSvc_CapiV2Util.cpp: set param for (param id 0x%lx) result %d����AudioDecSvc_CapiV2Util.cpp: set param for (param id 0x%lx) success��AudioDecSvc_CapiV2Util.cpp: module present as stub.�AudioDecSvc_CapiV2Util.cpp: Get Static Properties error�AudioDecSvc_CapiV2Util.cpp: Get Static Properties done with init_mem_req=%lu����AudioDecSvc_CapiV2Util.cpp: Insufficient memory to allocate to CapiV2 Module.It requires %lu bytes��AudioDecSvc_CapiV2Util.cpp: Module allocated for %lu bytes of memory at location 0x%p.��AudioDecSvc_CapiV2Util.cpp: Init error��AudioDecSvc_CmdHandler.cpp:audio_dec_svc: received NULL pointer for the payload while processing Register Events command����AudioDecSvc_CmdHandler.cpp:audio_dec_svc: received incorrect payload size of %lu or unsupported version %lu�AudioDecSvc_CmdHandler.cpp:audio_dec_svc: incorrect payload_size after number of events %lu�AudioDecSvc_CmdHandler.cpp:audio_dec_svc: failed to register %lu th APR event 0x%lx�AudioDecSvc_CmdHandler.cpp:audio_dec_svc: failed to deregister %lu th APR event 0x%lx���AudioDecSvc_CmdHandler.cpp:audio_dec_svc: no change in event registration status for %lu th APR event. prev mask 0x%lx, new mask 0x%lx�AudioDecSvc_CmdHandler.cpp:audio_dec_svc : register/deregister %lu APR events done. result %lu��AudioDecSvc_CmdHandler.cpp:AudioDecSvc_SetPpParam is supported only for PCM ULL modules�AudioDecSvc_CmdHandler.cpp:AudioDecSvc_SetPpParam Unsupported param ID = 0x%lx��AudioDecSvc_CmdHandler.cpp:AudioDecSvc_GetPpParam is supported only for PCM ULL modules�AudioDecSvc_CmdHandler.cpp:AudioDecSvc_GetPpParam Unsupported param ID = 0x%lx��AudioDecSvc_DataHandler.cpp:Unexpected error occured. Out buf is already present while processing output data Q.����AudioDecSvc_DataHandler.cpp:AudioDecSvc: Received invalid number of channels %lu ���AudioDecSvc_DataHandler.cpp:AudioDecSvc: Received media format in Non Pass-through case ����AudioDecSvc_DataHandler.cpp:AudioDecSvc: Received sampling rate = %lu, num_channels = %lu���AudioDecSvc_DataHandler.cpp:AudioDecSvc: Received Resync cmd 0x%lx!!����AudioDecSvc_DataHandler.cpp:AudioDecSvc: ERROR allocating Resync Buffer�AudioDecSvc_DataHandler.cpp:AudioDecSvc: ERROR sending Resync Buffer downstream�AudioDecSvc_DataHandler.cpp:Buffer is not NULL, Unexpected Error.���AudioDecSvc_EventUtils.cpp:Inserted node at 0x%lX for (event) = (0x%lX) ����AudioDecSvc_EventUtils.cpp:Removed node at 0x%lX for (event) = (0x%lX) �AudioDecSvc_MiMoUtil.cpp:MIMO is only supported with auto capi.�AudioDecSvc_MiMoUtil.cpp:AudioDecSvc number of dataQ elements is determined to be %lu���AudioDecSvc_MiMoUtil.cpp:All streams are occupied, cannot create a new stream!��AudioDecSvc_Util.cpp:Failed to allocate memory for ULL modules handle���AudioDecSvc_Util.cpp:AudioDecSvc ULL modules creation failed with result %lu����AudioDecSvc_Util.cpp:Reconfig media format: FMTID 0x%lx, CH %d, BPS %d, SR %lu, fmt_id 0x%lx����AudioDecSvc_Util.cpp:Early-EoS: AFE decoder doesn't support Early-EOS���AudioDecSvc_Util.cpp:Decoder prebuffer might have run out as out data duration < in data duration OR its first dec buffer. lhs = %lu, rhs = %lu�AudioDecSvc_Util.cpp:Creating CAPI at index %u, type %u (0-auto, 1-depack, 2-conv, 3-passthu, 4-pack, 5-cop-pack, 6-cop-depack)�AudioDecSvc_Util.cpp:Trying to create COP depacketizer CAPI V2 module-id 0x%lx �AudioDecSvc_Util.cpp:COP depacketizer 0x%lx not found ��AudioDecSvc_Util.cpp:Updating decoder delay from %lu to %lu�AudioDecSvc_Util.cpp:Decoder will not be able to send required amount of initial zeros. sent %lu only out of 1��AudioDecSvc_Util.cpp:Decoder sending %lu th zero buffer of size %lu to AFE��AudioDecSvc_Util.cpp:buffer expected to have no data, but it seems to have %lu bytes����AudioDecSvc_Util.cpp:Pushing initial zeros. prebuffer TS [%lu, %lu], dec buffer TS [%lu, %lu]. Delay(%lu)���AudioEncSvc.cpp:AudEncSvc Waiting for more input when holding onto a buffer�AudioEncSvc.cpp:AudEncSvc overwriting already popped input buffer���AudioEncSvc_Util.cpp:Encoder will not be able to send required amount of initial zeros. sent %lu only out of 1��AudioEncSvc_Util.cpp:Creating an encoder CAPI at index %u. CAPI type %d(0-auto, 1-depack, 2-pack, 3-cop_depack, 4-cop_pack, 5-cop-pack, 6-cop-depack), last capi %u�AudioEncSvc_Util.cpp:Updating encoder delay from %lu to %lu�AudioEncSvc_Prop_Util.cpp:AAC encoder cfg block: SR %lu, ch %u. aac-fmt %u, bit-rate %lu, mode %lu��AudioEncSvc_Prop_Util.cpp:SBC encoder cfg block: SR %lu, ch %u. alloc-method %lu, bit-rate %lu, blklen %lu, subbands %lu����AudioEncSvc_Prop_Util.cpp:encoder cfg block: SR %lu, ch %u��audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_set_param : pointer is not aligned to 4 bytes. Aborting.��audio_module_chain_wrapper.cpp:audio_module_chain_wrapper set param begin���audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_set_param: invalid payload size, aborting set param���audio_module_chain_wrapper.cpp:AudDevSvc: invalid payload size, aborting set param��audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_set_param: Module-Instance with ID 0x%lX-0x%lX failed setParam.���audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_set_param: Module-Instance with ID 0x%lX-0x%lX not found��audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_get_param received Bad size for param ID = 0x%lx��audio_module_chain_wrapper.cpp:audio_module_chain_wrapper get param begin���audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_get_param: Module-Instance with ID 0x%lX-0x%lX failed getParam.���audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_get_param: Module-Instance with ID 0x%lX-0x%lX not found��audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_destroy end���audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_create : module_instance_info_array is %d and num modules %d��audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_create : malloc fails while creating memory for module container��audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_create : No memory for creating handle info pointer for modules���audio_module_chain_wrapper.cpp:audio module capi wrapper: in_port %lu: Setting input media format for Module-Instance with ID 0x%lX-0x%lX, sampling rate : (%lu), num channels: (%lu)���audio_module_chain_wrapper.cpp:audio module capi wrapper: Module-Instance with ID 0x%lX-0x%lX failed to accept the current media type. Disabling it.����audio_module_chain_wrapper.cpp:audio module capi wrapper: Media format propagation and stream buf init done�audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_init: Failed to allocate memory for ports for module 0x%lX-0x%lX.�audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_init: Module ID 0x%lX type is not CAPIv2. Type is %d.�audio_module_chain_wrapper.cpp:audio_module_chain_wrapper_init: Module ID 0x%lX is not supported.���audio_module_chain_wrapper.cpp: Error in audio_module_chain_wrapper_event_callback function. The actual size %lu is greater than the max size %lu for id %lu.���audio_module_chain_wrapper.cpp: Error in audio_module_chain_wrapper_event_callback function. The actual size %lu is less than the required size %zu for id %lu.�audio_module_chain_wrapper.cpp:Audio Module %lu KPPS %lu���audio_module_chain_wrapper.cpp: Audio Module %lu BW %lu����audio_module_chain_wrapper.cpp: Audio Module %lu process check set to %lu���audio_module_chain_wrapper.cpp:Audio Module-Instance with id 0x%lX-0x%lX provided invalid port for event id %lu. Only output port 0 is supported.���audio_module_chain_wrapper.cpp:Audio Module-Instance with id 0x%lX-0x%lX provided input port for event id %lu. Only output port 0 is supported.�audio_module_chain_wrapper.cpp:Audio Module-Instance with id 0x%lX-0x%lX provided port %lu for event id %lu. It has only %lu output ports.��audio_module_chain_wrapper.cpp:Audio Module-Instance with id 0x%lX-0x%lX provided data_format %lu for event id %lu. Only port FIXED_POINT(0) are supported.����audio_module_chain_wrapper.cpp:Audio Module %lu Delay %lu��audio_module_chain_wrapper.cpp: Module %lu: Error in callback function. ID %lu not supported.���audio_module_chain_wrapper.cpp:audio_module_chain_wrapper Module with ID 0x%lX failed in getting some required static properties with %d.���audio_module_chain_wrapper.cpp:audio_module_chain_wrapper Module with ID 0x%lX failed in getting some optional static properties with %d. Using default values.�audio_module_chain_wrapper.cpp:audio_module_chain_wrapper Module with ID 0x%lX returned unsupported properties, force disabling the module��audio_module_chain_wrapper.cpp:audio_module_chain_wrapper Module with ID 0x%lX failed to allocate memory. The module requested for %lu bytes.���audio_module_chain_wrapper.cpp:audio_module_chain_wrapper Module with ID 0x%lX allocated for %lu bytes of memory����audio_module_chain_wrapper.cpp:audio_module_chain_wrapper Module with ID 0x%lX failed in init with %d.��audio_module_chain_wrapper.cpp:audio module capi wrapper: invalid bits per sample %lu���audio_module_chain_wrapper.cpp:Audio module capi wrapper: Out of memory allocating stream buf���MixerSvc_AvSync.cpp:MtMx #%lu: i/p port %lu Enable SetParam on SampleSlip library failed with result: %lu.��MixerSvc_AvSync.cpp:MtMx #%lu: i/p port %lu Hold Dur [%lu %lu], ZerosToFill %lu sam/ch samplesneeded %lu����MixerSvc_AvSync.cpp:MtMx #%lu: i/p port %lu, trying to process the i/p buffer during inPortState:%lu and skipping���MixerSvc_AvSync.cpp:MtMx #%lu cmd [%lu] (AdjSessClk) handler: rcvd command with zero adjust time or in independent clock recovery mode��MixerSvc_AvSync.cpp:MtMx #%lu cmd [%lu] (AdjSessClk) handler: Adjust %lu samples����MixerSvc_AvSync.cpp:MtMx #%lu cmd [%lu] (AdjSessClk) handler: Sample Slip Get Param failed with %d��MixerSvc_AvSync.cpp:MxArInPortSetParam: param size mismatch, incoming size %lu��MixerSvc_AvSync.cpp:MxArInPortSetParam: param id 0x%x attempted on non default clock recovery mode %ld��MixerSvc_AvSync.cpp:MxArInPortSetParam: creation of Sample slip library failed with error code %d����MixerSvc_AvSync.cpp:MtMx #%lu: i/p port %lu AVSyncLib: SampleSlip library enable: %x.���MixerSvc_AvSync.cpp:MtMx sampleslip struct ptr:0x%p and Alg_delay:%lu.��StreamRouterSvc_AvSync.cpp:Streamrouter: i/p port %lu received unsupported SetParam ID %x���avsync_lib.cpp:AVSync Param Lib: ClockRecoveryMode: %lu�avsync_lib.cpp:AvSyncLib: Client Start Time as %ld with offset %ld and downstream delay %ld�avsync_lib.cpp:AVSyncLib: Run immediate issued for render decision mode %ld. Reverting to default���avsync_lib.cpp:AVSyncLib: Run immediate issued for clock recovery mode %ld. Reverting to default����avsync_lib.cpp:AVSyncLib: Default render decision configured for clock recovery mode %ld. Reverting to default��avsync_lib.cpp:AvSyncLib: Run immediate configured for STC render decision mode. Start time as:%ld, and current time %lu, downstream delay %ld, input timestamp %lu�stream_dev_drift_calc.cpp:SD Drift Calc: Updating drift value to %d�EliteLinkedList.cpp:EliteLinkedList: Out of memory trying to malloc node. Malloc size: %lu.�rcinit_task.c:ADSP:Group initializations end����rcinit_task.c:ADSP:Group terminations begin�